KIPP Clamping Technology 2018

NEW PRODUCTS
Clamping elements
Positioning elements
Support and stop elements
Form holding systems
Workpiece stabiliser
Connecting elements
Basic elements
Mineral cast
Add-on elements
Accessories
Zero-point clamping system
5-axis module clamping system 80
5-axis module clamping system 50
Positioning and clamping systems
5-axis clamping system compact
3-axis and 5-axis vices
Centric vices
NC vices
Multi-clamping systems

THE SPECIALIST FOR CLAMPING TECHNOLOGY TRUST IN KIPP H EINRICH KIPP WERK is a manufacturer and operating parts. of clamping technology, standard elements We offer around 2800 components in the specialist field of workholding and clamping technology. The systems are of modular design and compatible with each other. This guarantees maximum setup time optimisation for your machine tools. 95% of our standard components are available ex-stock and so can be quickly delivered. Our team of experts are also available should you have any questions. We develope clamping fixtures for small to medium batch work - individually tailored to your projects. KIPP supplies products and solutions of which we are 100% convinced. This is what this owner-managed traditional company stands for. Nicolas Kipp Heinrich Kipp 4

New catalogue logic WORKHOLDING TECHNOLOGY Diverse component program for the universal clamping of workpieces. Logically structured product groups such as clamping elements, positioning elements and clamping accessories for machine tools. Freely combinable and very fl exible. MODULAR CLAMPING TECHNOLOGY Basic elements for modular workholding over grid holes Standardised plates, towers and angles improve the fl exibility and reduce the number of xture elements in machining to a minimum. ZERO-POINT CLAMPING TECHNOLOGY Systems for quick, precise clamping and referencing with the zero-point clamping technology. The 5-axis module clamping system is available for multi-side machining. Other quick-change systems are the mechanical and pneumatic positioning and clamping systems. VICE CLAMPING TECHNOLOGY Various vice types. 5-axis clamping systems for 5-sided machining. NC vices for 3-axis milling machines. Multi-clamping systems for large quantities. Centric vices with zero-point and automaton interface. 8 8

Index A-Z 1-9 3-axis clamping system 5-axis clamping system 3-axis clamping system for grid plates 3-axis clamping system for T-slots page 419-421 422 423 Centring pins for aligning hole Centring pins for central hole Clamping arms for swing clamp Clamping balls with cup for workpiece stabiliser 5-axis clamping system compact 371, 383, 395, 407, 412, 417 Clamping bolts 5-axis clamping system compact smooth vice jaws 5-axis clamping system for grid plates 5-axis clamping system for T-slots 5-axis module clamping system 50 5-axis module clamping system 80 5D workpiece stops A Adjustable stops Adjustable supports Aluminium protection plugs Angle clamp adapters size 80 mm Atlas jack with locknut Attachment jaws stepped, with grip rail Attachment step jaw with gripper for NC vice B Ball-end thrust screws with head Ball-end thrust screws without head with ﬂ attened ball 400 424 425 373 345 225 Clamping claw sets Clamping collets machinable Clamping elements Clamping pins Clamping pins (high force) Clamping screws page Clamping screws (high force) 223 172 325 362 174 440 448 Clamping units Clamping units pin-end strap Clamp springs Clamp strap assemblies Clamp straps Clamp straps goose-neck Clamp straps pin-end page 188-189 192-193 Clamp straps tapped both ends Clamp straps tapped heel Clamp straps with adjustment unit Ball-end thrust screws without head with ﬂ attened ball Clamp strap unit and rotation lock 194 Claw clamp for workpiece stabiliser Ball-end thrust screws without head with full ball 190-191 Collets for external clamping Baseplate for centric vice Base plates Base rails Basic elements C Cam clamps with riser Cam screws with hexagon washer Cam screws with hexagon washer, for T-slots Cam screws with knife edge washer Centre jaws Centric clamp Centric vices jaw width 65 mm 443 405 460 273-277 page 137, 139 136 137 137 410 435 437 Collets for external or internal clamping Collets for internal clamping Connecting blocks Connecting bolts Connecting bushes Connecting screws long Connecting screws short Couplings for cross-clamping C-washers captive, with shoulder screw C-washers DIN 6372, enhanced Cylinder clamping sets D Centric vices jaw width 80–125 mm 438-439 Draw-down jaws Centring bushes Centring clamping bolts size 80 mm Centring clamps Centring clamps round Centring clamps with ball or hexagon segments 14 389 370 141 144-145 142-143 E Extension pieces Extensions for jack screws Extension shafts Extension shafts for workpiece stabiliser 323-324 323 88 252 96 416 240 49 101 103 101 103 60 52-53 76 54-55, 57 72 71 70 73 74-75 51 61 251 236-237 232 238-239 322 68 66, 69 63 63 414 269 261 413 page 429 page 182 185 404 248

Index A-Z Extension shafts with union nut Extractor F Fastener elements Fastening blocks Form M Fastening set for T-slots Fastening set for T-slot tables Fastening set with clamping ball for workpiece stabiliser Fastening set workpiece stabiliser Fine adjustment for workpiece stabiliser Fixture clamps machinable Fixture clamps unequal hexagon Flat clamps Floating clamp Floating clamp with separate workpiece clamp and interlock Form holding systems G Gripper pads square Grippers and inserts round Gripper screws hexagonal Gripper studs Grub screws with thrust pad H Handles screw-in Handles screw-in with torque limit Hexagon head bolts DIN EN ISO 4014 / DIN EN 24014 Hexagon head bolts full thread DIN 933 Hexagon nuts height 1.5xD, DIN 6330 enhanced Hexagon nuts with collar height 1.5xD, DIN 6331 enhanced Hinged stops Hook clamp holders Hook clamps Hook clamps ground Form A/B/C Hook clamps with collar I Inserts Inserts for stepped jaws 431 270 page Jaw plates machinable Jaw plates machinable Jaw plates smooth 255 315 432 250 251 250 249 138 138 123 98 99 227 Jaw plates smooth for centre jaws Jaw plates smooth for pendulum jaws Jaw plates standard Jaw plates with pins Jaw plates with pins for centre jaws Jaw plates with pins for pendulum jaws K Keyway nuts round L Locating and clamping systems Locating bushes for locating pins Locating bushes for pneumatic locating cylinder Locating bushings for grid systems page 221 Locating cylinders Ball Lock Locating cylinders pneumatic 218-219 Locating cylinder with quick clamping system 220 222 186 page 89 90-91 267 267 259 258 442 78-79 82 Locating elements Locating pins Locating pins expanding Locating pins with ball-end Form A Locating pins with ball-end Form B Locating pins with ﬂ attened ball-end Form C Locating pins with ﬂ attened ball-end Form D Locating pins with internal thread Locating sleeve Locating supports Low-proﬁ le clamps M Machinable collet system for grid plates 77-78, 81 Machinable collet system for self-installation 80, 83 page 173 442 Machinable jaws rectangular Magnet for workpiece stabiliser Mandrel collets Mineral cast Interchangeable subplates for UNI lock zero point clamping system 337 Mini tooling blocks J Jack screws Jack screws extended Jaw adapters for round workpieces Jaw pins page Mounting plates for clamping collets 183 184 429 412, 430 Multi-clamping system Multi-clamping system hard stops Multi-clamping system soft stops 402 428 401 411 409 428 401 411 409 page 461 page 385 155 393 325 387 392 388 147 322 156 150 152 151 153 154 324 165 125 page 231 230 242-243 249 140 303-304 313 241 451-453 454 455 15

447 445 269 page 408 229 58 316 318 317 340 340 100 102 page 341 page 122 390 390 149 149 159 Index A-Z N NC vice jaw width 125 mm NC Vices Nuts for T-slots DIN 508 enhanced P Pendulum jaws Positioning elements Positioning units Positioning units spring-loaded Positive Clamping System Power clamp Precision riser blocks Form D Precision riser blocks Form E Precision riser blocks Form M Protection bolts Protective plug Pull clamps Pull clamps (high force) Q Quick-ﬁ t couplings R Rack plates CL Receiver bushes Form A (pressed in from rear) Receiver bushes Form B (screwed down from front) Removable locating pins Forms A and C Removable locating pins Forms B and D Rest and stop elements Rest pads Riser bars Riser blocks Riser blocks Form H Riser blocks Form P Riser plates Risers for power clamp Robust side clamps Round positioning plates S Screw stop adjustable Seating blocks adjustable Seating ledges Seating ledges screw-on Self-aligning pads 208-209 216-217 210-213 198 200-201 202-203 204-205 148 148, 432 441 458 459 458 431 415 459 256-257 282-285 69, 166 179-180 169 164 84-85 86-87 93 92 94 page 233 326 95 59 page Self-aligning pads adjustable with o-ring Self-aligning pads adjustable with O-ring, exchangeable inserts and hexagon socket Self-aligning pads adjustable with O-ring and exchangeable inserts Self-aligning pads adjustable with O-ring and hexagon socket 214-215 91, 104-105 65-67, 157 Self-aligning pads swivel angle 12° Self-aligning pads swivel angle 14° and 20° 170-171 Self-aligning pads with o-ring Self-aligning pads with O-ring and exchangeable inserts Shoulder screws Form A Shoulder screws Form B Side clamps Side clamps with rest pad Side stops Slot keys Socket head screws DIN 912 / DIN EN ISO 4762 Spacing washers 107-108, 110-114 115 109 268 266 262 Spherical washers DIN 6319, 10/01 264-265 Step jaw attachment for 5-axis machining Stop carbide-coated and serrated Stop prism Stops Stop set Stop sets Stop with positive down force Studs DIN 6379 68, 181, 187 Subplates 81 62 314 53 426 59 106 319 page 224 167 Support blocks Support bolts Support elements Supports Swing clamps Swing clamps (high force) Swing clamps mini Swing clamps mini, with cam lever Swivel hold-down clamp mini, with cam lever T Tension cone for internal clamping collet 403, 427, 461 Threaded bushings for grid systems 403 Thrust clamps 196-197 Thrust pads for power clamp Self-aligning pads adjustable 206 Toe clamps 116-117, 120 16

Index A-Z Toe clamps compact Toe clamps stepped Toe stops Toe stops stepped Toe stops stepped Tombstones cube grey cast iron Tombstones cube with grid holes Tombstones cube without grid holes Tombstones double-sided grey cast iron Tombstones double-sided with grid holes Tombstones double-sided without grid holes Tombstones single-sided with grid holes Tombstones single-sided without grid holes Tombstones window frame Tooling angle plates Tooling blocks Tooling plates Traction cone for internal clamping collet T-slot clamps T-slot keys T-slot plate U 135 118 121 119 119 300 UNI lock clamping station UNI lock double clamping module UNI lock installation clamp UNI lock manual clamping module UNI lock T-slot centring clamp bolt size 80 mm V 296-297 298-299 V-blocks, vertical V-blocks split 294 Vice jaws complete 290-291 292-293 286-287 288-289 W Washers for clamps DIN 6340 Washers medium, DIN EN ISO 7089 A Wedge clamps 295 Wedge clamps double jaw faces serrated 310-311 Wedge clamps jaw face smooth or serrated 312 Wedge clamps jaw faces serrated 332-333 335 334 336 363 page 160-161 162 406 page 260 263 132, 134 130-131 126, 456 128, 131 278-281 Wedge clamps machinable 127, 129, 133, 457 238 124 268 433 Workholding pyramid mineral cast Workpiece stabiliser Workpiece support cylinders Workpiece supports page Workpiece supports adjustable Z Zero-point clamping system UNI lock 5-axis add-on clamping module size 80 mm UNI lock 5-axis add-on module adjustable system size 50 mm UNI lock 5-axis add-on module system size 50 mm 357 380 379 UNI lock 5-axis basic module adjustable system size 50 mm 377, 380 UNI lock 5-axis basic module double clamp size 80 mm UNI lock 5-axis basic module double clamp system size 50 mm UNI lock 5-axis basic module system size 50 mm UNI lock 5-axis basic module system size 80 mm UNI lock 5-axis collet adapter size 80 mm UNI lock 5-axis face-grip adapter size 80 mm UNI lock 5-axis mounting base for general clamping size 80 mm 355 378 376 354 358 359 356 UNI lock 5-axis reducer adapter size 80 mm 360-361 UNI lock 5-axis reducer adapter system size 50 mm UNI lock 5-axis shoulder screws for fastening to workpieces size 80 mm UNI lock 5-axis shoulder screws size 80 mm UNI lock clamping bolts for fastening to workpieces size 80 mm UNI lock clamping pin one-piece size 80 mm 381 369 368 368 366 UNI lock clamping pin size 80 mm 338-339, 364-365 UNI lock clamping pin system size 50 mm UNI lock clamping pin with threaded pin size 80 mm 382 367 306 245, 248 178 168, 177 175-176 page 329 17

Numerical index Art. group No. page Art. group No. page Art. group No. page Art. group No. page 71 57 51 82 83 77-78, 81 80 78 81 138 138 137 136 137 137, 139 111 135 132 133 126, 456 128, 131 129 130-131 196-197 200-201 202-203 204-205 206 208-209 210-213 214-215 216-217 187 179 198 181 183 150-151 152-153 156 140 142-143 269 188-189 190-194 K0385 K0386 K0387 K0388 K0500 K0501 K0502 K0587 K0591 K0607 K0649 K0697 K0701 K0702 K0729 K0730 K0800 K0801 K0802 K0803 K0804 K0805 K0806 K0807 K0808 K0809 K0810 K0811 K0812 K0813 K0814 K0815 K0816 K0817 K0818 K0819 K0820 K0821 K0822 K0823 K0824 K0825 K0826 K0827 K0828 218-219 220 221 222 230 231 232-233 440 442 442 127, 457 256-257 258 259 264-265 261 278-280 281 286-289 290-293 295 296-299 282-285 310 311 312-313 315 314, 316-318 319 223 324 148, 432 165 149 149 160-162 224 182 163 164 167 172 173 166 180 K0829 K0830 K0831 K0832 K0833 K0834 K0835 K0836 K0837 K0838 K0839 K0841 K0842 K0843 K0844 K0845 K0846 K0847 K0848 K0849 K0850 K0851 K0853 K0854 K0855 K0856 K0857 K0858 K0859 K0860 K0861 K0862 K0863 K0864 K0865 K0867 K0868 K0869 K0870 K0871 K0872 K0873 K0889 K0890 K0891 186 107 108 109 52-53 70 72 73 74 75 53 60 61 62 63 63 65-67 68 68 69 66, 69 79 118-122 322 322 323 323 324 76 262 325 325 326 268 258 260 263 266 267 267 269 270 168 110 106 K0893 K0902 K0903 K0904 K0905 K0906 K0907 K0908 K0909 K0910 K0911 K0912 K0913 K0914 K0915 K0916 K0917 K0918 K0919 K0920 K0921 K0922 K0923 K0924 K0925 K0926 K0927 K0928 K0929 K0930 K0931 K0932 K0933 K0934 K0935 K0936 K0937 K0938 K0939 K0940 K0941 K0942 K0943 K0944 K0945 141 454 455 460 458 459 459 461 461 100-101 102-103 84-85, 88 86-87 95 89 90-91 170-171 157 175 176 177 178 184 185 92 93 94 112 113 114 115 116 117 240-241 387-388 389 390 390 422, 424 423, 425 426 427 428 428 429 K0002 K0003 K0004 K0012 K0013 K0014 K0015 K0017 K0018 K0022 K0023 K0025 K0026 K0027 K0028 K0033 K0036 K0037 K0038 K0039 K0040 K0041 K0042 K0282 K0283 K0284 K0285 K0287 K0288 K0289 K0290 K0291 K0294 K0297 K0302 K0307 K0308 K0350 K0351 K0356 K0357 K0358 K0377 K0380 K0383 18

Numerical index Art. group No. page Art. group No. page K0946 K0947 K0948 K0951 K0952 K0953 K0954 K0960 K0961 K0962 K0963 K0964 K0965 K0966 K0967 K0968 K0969 K0970 K0971 K0973 K0974 K0975 K0976 K0987 K0988 K0989 K0990 K0991 K0992 K0993 K0994 K1001 K1002 K1003 K1008 K1009 K1010 K1011 K1012 K1013 K1094 K1095 K1115 K1117 K1118 412, 430 431 431 432 433 429 268 354 355 356 357 358 359 360-361 338-339, 364-367 368 363 368 369 400 403 401-402 406 410 408 413 404 404 414 415 405 409 411 334 416 332-333 340 341 370 362 154 155 441 376-377, 380 378 K1119 K1120 K1121 K1122 K1123 K1165 K1166 K1167 K1168 K1169 K1170 K1183 K1184 K1185 K1186 K1187 K1188 K1189 K1190 K1191 K1192 K1193 K1204 K1205 K1206 K1215 K1218 K1219 K1220 K1224 K1225 K1226 K1227 K1228 K1229 K1230 K1232 K1233 K1234 K1235 K1236 K1237 K1238 K1273 K1274 379-380 381 382 335 336 54-55 144-145 134 123 242-243 248 235 236-239 238 248 249 249 250 250 251 251 252 56 58 59 59 337 392 393 169 294 300 99 98 125 124 96 174 225 306 437 438-439 447 448 443 19

Product overview Clamping elements Clamp straps with adjustment unit K0004 Clamping units pin-end strap K0833 Riser blocks Form P K0839 Clamp strap assemblies K1165 Adjustable heel supports for clamp strap assembly K1204 Clamp strap assemblies K0003 Power clamp K1205 Risers for power clamp K1206 Thrust pads for power clamp K1215 Clamping units K0841 Clamp strap unit K0842 Riser blocks K0843 Connecting screws short K0844 Connecting screws long K0845 Positioning units K0846 Connecting bolts K0847 Page 51 Page 52 Page 53 Page 55 Page 56 Page 57 Page 58 20 new article expanded article Page 59 Page 59 Page 60 Page 61 Page 62 Page 63 Page 63 Page 65 Page 68

Product overview Clamping elements Rest pads K0848 Support blocks K0849 Connecting bushes K0850 Clamp straps pin-end K0834 Clamp straps goose-neck K0002 Clamp straps K0835 Clamp straps tapped both ends K0836 Clamp straps tapped heel K0837 Clamp straps tapped heel K0838 Clamp springs K0859 Hook clamps ground Form A/B/C K0014 Hook clamp holders K0017 Hook clamp holders K0851 Hook clamps with collar K0015 Riser bars K0018 Hook clamps K0012 Hook clamps with collar K0013 Swing clamps K0912 Page 68 Page 69 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 new article expanded article Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 21

Product overview Clamping elements Swing clamps (high force) K0913 Floating clamp K1228 Clamping arms for swing clamp K0912 Handles screw-in K0915 Handles screw-in with torque limit K0916 Swing clamps mini, with cam lever K0925 Swing clamps mini K0926 Swivel hold-down clamp mini, with cam lever K0927 Thrust clamps K0914 Clamping bolts K1232 Floating clamp with separate workpiece clamp and interlock K1227 Pull clamps K0910 Clamping pins K0910 Clamping screws K0910 Pull clamps (high force) K0911 Clamping pins (high force) K0911 Clamping screws (high force) K0911 Robust side clamps K0891 Page 86 Page 88 Page 89 Page 90 Page 92 Page 93 Page 94 Page 95 Page 96 Page 98 Page 99 Page 100 Page 101 Page 101 Page 102 Page 103 Page 103 Page 106 22 new article expanded article

Product overview Clamping elements Side clamps K0830 Side clamps K0831 Side stops K0832 Side clamps K0890 Side clamps K0033 Side clamps K0928 Side clamps K0929 Side clamps K0930 Side clamps with rest pad K0931 Toe clamps K0932 Toe clamps K0933 Toe clamps stepped K0853 Toe clamps stepped K0853 Toe stops stepped K0853 Toe stops stepped K0853 Toe clamps K0853 Toe clamps K0853 Toe stops K0853 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 new article expanded article Page 116 Page 117 Page 118 Page 118 Page 119 Page 119 Page 120 Page 120 Page 121 23

Product overview Clamping elements Toe stops K0853 Rack plates CL K0853 Flat clamps K1168 T-slot clamps K1230 Low-proﬁ le clamps K1229 Wedge clamps jaw face smooth or serrated K0039 Wedge clamps machinable K0649 Wedge clamps jaw faces serrated K0040 Wedge clamps machinable K0041 Wedge clamps double jaw faces serrated K0042 Wedge clamps K0037 Wedge clamps machinable K0038 Wedge clamps K1167 Toe clamps compact K0036 Cam screws with hexagon washer K0026 Cam screws with hexagon washer, for T-slots K0027 Cam screws with knife edge washer K0025 Fixture clamps machinable K0022 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126, 456 Page 127, 457 Page 128 Page 129 24 new article expanded article Page 130 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 137 Page 138

Product overview Clamping elements Fixture clamps unequal hexagon K0023 Cam clamps with riser K0028 Mandrel collets K0357 Centring clamps K0893 Centring clamps with ball or hexagon segments K0358 Centring clamps round K1166 Page 138 Page 139 Page 140 Page 141 Page 143 Page 144 new article expanded article 25

Locating pins with ﬂ attened ball-end Form D K0351 Locating pins with internal thread K1094 Locating bushes for locating pins K1095 Locating pins expanding K0356 Positioning units K0918 Page 153 Page 154 Page 155 Page 156 Page 157 Product overview Locating elements Shoulder screws Form A K0815 Shoulder screws Form B K0815 Removable locating pins Forms A and C K0817 Removable locating pins Forms B and D K0818 Locating pins with ball-end Form A K0350 Locating pins with ﬂ attened ball-end Form C K0350 Locating pins with ball-end Form B K0351 Page 148 Page 148, Page 149 Page 149 Page 150 Page 151 Page 152 26 new article expanded article

Product overview Rest and stop elements V-blocks, vertical K0819 V-blocks, vertical K0819 V-blocks, vertical K0819 V-blocks, vertical K0819 V-blocks split K0819 Eccentric supports K0822 Supports K0823 Locating supports K0816 Support blocks K0827 Seating blocks adjustable K0824 Workpiece supports K0889 Support elements K1224 Positioning units spring-loaded K0917 Adjustable supports K0825 Inserts K0826 Atlas jack with locknut K1233 Page 160 Page 160 Page 161 Page 161 Page 162 Page 163 Page 164 new article expanded article Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 172 Page 173 Page 174 27

Product overview Rest and stop elements Workpiece supports adjustable K0919 Workpiece supports adjustable K0920 Workpiece supports K0921 Workpiece support cylinders K0922 Support bolts K0297 Support bolts K0828 Rest pads K0307 Extension pieces K0821 Jack screws K0308 Jack screws extended K0923 Extensions for jack screws K0924 Grub screws with thrust pad K0829 Rest pads K0294 Ball-end thrust screws with head K0380 Ball-end thrust screws without head with full ball K0383 Ball-end thrust screws without head with ﬂ attened ball K0383 Ball-end thrust screws without head with ﬂ attened ball and rotation lock K0383 Self-aligning pads K0282 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 190 Page 193 Page 194 Page 197 28 new article expanded article

Product overview Rest and stop elements Self-aligning pads swivel angle 12° K0302 Self-aligning pads swivel angle 14° and 20° K0283 Self-aligning pads with o-ring K0284 Self-aligning pads with O-ring and exchangeable inserts K0285 Self-aligning pads adjustable K0287 Self-aligning pads adjustable with o-ring K0288 Self-aligning pads adjustable with O-ring and exchangeable inserts K0289 Self-aligning pads adjustable with O-ring and hexagon socket K0290 Self-aligning pads adjustable with O-ring, exchangeable inserts and hexagon socket K0291 Grippers and inserts round K0385 Gripper screws hexagonal K0386 Gripper pads square K0387 Gripper studs K0388 Adjustable stops K0813 Screw stop adjustable K0820 5D workpiece stops K1234 Page 198 Page 201 Page 203 Page 204 Page 206 Page 209 Page 211 Page 215 Page 216 Page 219 Page 220 Page 221 Page 222 Page 223 Page 224 Page 225 new article expanded article 29

Traction cone for internal clamping collet K1185 Clamping collets machinable K0934 Mounting plates for clamping collets K0934 Machinable jaws rectangular K1169 Page 238 Page 240 Page 241 Page 242 Product overview Form holding systems Machinable collet system for self-installation K0500 Machinable collet system for grid plates K0501 Collets for external or internal clamping K0502 Tension cone for internal clamping collet K0502 Adapter for collets K1183 Collets for external clamping K1184 Collets for internal clamping K1184 Page 230 Page 231 Page 232 Page 233 Page 235 Page 236 Page 238 30 new article expanded article

Claw clamp for workpiece stabiliser K1192 Clamping balls with cup for workpiece stabiliser K1193 Page 251 Page 252 Product overview Workpiece stabiliser Workpiece stabiliser K1170 Extension shafts for workpiece stabiliser K1186 Fine adjustment for workpiece stabiliser K1187 Magnet for workpiece stabiliser K1188 Fastening set for T-slot tables K1189 Fastening set workpiece stabiliser K1190 Fastening set with clamping ball for workpiece stabiliser K1191 Page 248 Page 248 Page 249 Page 249 Page 250 Page 250 Page 251 new article expanded article 31

Product overview Fastener elements Studs DIN 6379 K0697 Extension nuts height 3xD K0865 Hexagon nuts with collar height 1.5xD, DIN 6331 enhanced K0701 Hexagon nuts height 1.5xD, DIN 6330 enhanced K0702 Washers for clamps DIN 6340 K0867 C-washers DIN 6372, enhanced K0730 Spacing washers K0860 Washers medium, DIN EN ISO 7089 A K0868 Spherical washers DIN 6319, 10/01 K0729 Socket head screws DIN 912 / DIN EN ISO 4762 K0869 Hexagon head bolts DIN EN ISO 4014 / DIN EN 24014 K0870 Hexagon head bolts full thread DIN 933 K0871 Slot keys K0864 T-slot keys K0954 Nuts for T-slots DIN 508 enhanced K0377 C-washers captive, with shoulder screw K0872 Page 256 Page 258 Page 258 Page 259 Page 260 Page 261 Page 262 Page 263 Page 264 Page 266 Page 267 Page 267 Page 268 Page 268 Page 269 Page 269 32 new article expanded article

Product overview Fastener elements Extractor K0873 Page 270 new article expanded article 33

Product overview Basic elements Tooling plates K0800 Tooling plates K0800 Tooling plates K0801 Subplates K0806 Subplates K0806 Subplates K0806 Tombstones single-sided with grid holes K0802 Tombstones single-sided without grid holes K0802 Tombstones double-sided with grid holes K0803 Tombstones double-sided without grid holes K0803 Tombstones double-sided grey cast iron K1225 Tombstones window frame K0804 Tombstones cube with grid holes K0805 Tombstones cube without grid holes K0805 Tombstones cube grey cast iron K1226 Page 278 Page 280 Page 281 Page 282 Page 283 Page 284 Page 286 34 new article expanded article Page 288 Page 290 Page 292 Page 294 Page 295 Page 296 Page 298 Page 300

Product overview Mineral cast Workholding pyramid mineral cast K1235 Page 306 new article expanded article 35

Precision riser blocks Form M K0811 Precision riser blocks Form E K0811 Round positioning plates K0812 Page 317 Page 318 Page 319 Product overview Add-on elements Tooling angle plates K0807 Tooling angle plates K0808 Tooling blocks K0809 Mini tooling blocks K0809 Riser blocks Form H K0811 Fastening blocks Form M K0810 Precision riser blocks Form D K0811 Page 310 Page 311 Page 312 Page 313 Page 314 Page 315 Page 316 36 new article expanded article

Aluminium protection plugs K0862 Threaded bushings for grid systems K0863 Page 325 Page 326 Product overview Accessories Connecting blocks K0854 Locating pins K0855 Centring pins for central hole K0856 Centring pins for aligning hole K0857 Centring pins for aligning hole K0858 Locating sleeve K0814 Locating bushings for grid systems K0861 Page 322 Page 322 Page 323 Page 323 Page 324 Page 324 Page 325 new article expanded article 37

Page 340 Page 340 Page 341 Product overview Zero-point clamping system Protection bolts K1010 Protective plug K1010 UNI lock clamping station K1009 Quick-ﬁ t couplings K1011 UNI lock clamping station K1009 UNI lock installation clamp K1003 UNI lock double clamping module K1122 UNI lock manual clamping module K1123 Interchangeable subplates for UNI lock zero point clamping system K1218 UNI lock clamping pin size 80 mm K0967 Page 332 Page 333 Page 334 Page 335 Page 336 Page 337 Page 339, 365 38 new article expanded article

Product overview 5-axis module clamping system 80 UNI lock 5-axis reducer adapter size 80 mm K0966 Angle clamp adapters size 80 mm K1013 UNI lock 5-axis basic module system size 80 mm K0960 UNI lock T-slot centring clamp bolt size 80 mm K0969 UNI lock 5-axis basic module double clamp size 80 mm K0961 UNI lock 5-axis mounting base for general clamping size 80 mm K0962 UNI lock 5-axis add-on clamping module size 80 mm K0963 UNI lock 5-axis collet adapter size 80 mm K0964 UNI lock 5-axis face-grip adapter size 80 mm K0965 UNI lock 5-axis reducer adapter size 80 mm K0966 Page 354 Page 355 Page 356 Page 357 Page 358 Page 359 Page 360 UNI lock clamping pin size 80 mm K0967 UNI lock clamping pin one-piece size 80 mm K0967 UNI lock clamping pin with threaded pin size 80 mm K0967 UNI lock clamping bolts for fastening to workpieces size 80 mm K0968 UNI lock 5-axis shoulder screws size 80 mm K0970 UNI lock 5-axis shoulder screws for fastening to workpieces size 80 mm K0971 new article expanded article Page 361 Page 362 Page 363 Page 339, 365 Page 366 Page 367 Page 368 Page 368 Page 369 39

Product overview 5-axis module clamping system 80 5-axis module clamping system 50 Centring clamping bolts size 80 mm K1012 Page 370 UNI lock 5-axis basic module system size 50 mm K1117 UNI lock 5-axis basic module adjustable system size 50 mm K1117 UNI lock 5-axis basic module double clamp system size 50 mm K1118 UNI lock 5-axis add-on module system size 50 mm K1119 UNI lock 5-axis add-on module adjustable system size 50 mm K1119 UNI lock 5-axis reducer adapter system size 50 mm K1120 UNI lock clamping pin system size 50 mm K1121 Page 376 Page 377 Page 378 Page 379 Page 380 Page 381 Page 382 40 new article expanded article

Product overview Locating and clamping systems Locating cylinders Ball Lock K0935 Locating cylinder with quick clamping system K0935 Centring bushes K0936 Receiver bushes Form A (pressed in from rear) K0937 Receiver bushes Form B (screwed down from front) K0938 Locating cylinders pneumatic K1219 Locating bushes for pneumatic locating cylinder K1220 Page 387 Page 388 Page 389 Page 390 Page 390 Page 392 Page 393 new article expanded article 41

Product overview 5-axis clamping system compact Adapter shafts K0991 Base plates K0994 Vice jaws complete K0976 Pendulum jaws K0988 Jaw plates smooth for pendulum jaws K1001 Jaw plates with pins for pendulum jaws K1001 Centre jaws K0987 Jaw plates smooth for centre jawsK1002 Jaw plates with pins for centre jaws K1002 Page 400 Page 401 Page 401 Page 402 Page 403 Page 403 Page 404 5-axis clamping system compact smooth vice jaws K0973 Jaw plates smooth K0975 Jaw plates with pins K0975 Jaw plates machinable K0975 Seating ledges K0974 Seating ledges screw-on K0974 Extension shafts K0990 42 new article expanded article Page 404 Page 405 Page 406 Page 408 Page 409 Page 409 Page 410 Page 411 Page 411

Product overview 5-axis clamping system compact Jaw pins K0946 Cylinder clamping sets K0989 Couplings for cross-clamping K0992 Stop sets K0993 Clamping claw sets K1008 Page 412, 430 Page 413 Page 414 Page 415 Page 416 new article expanded article 43

Product overview 3-axis and 5-axis vices Jaw plates machinable K0944 Draw-down jaws K0953 Jaw adapters for round workpieces K0945 Jaw pins K0946 Extension shafts with union nut K0947 Stop set K0948 Shoulder screws Form B K0815 Fastening set for T-slots K0951 T-slot plate K0952 Page 422 Page 423 Page 424 Page 425 Page 426 Page 427 Page 428 Page 428 Page 429 Page 429 Page 412, 430 Page 431 Page 431 Page 432 Page 432 Page 433 3-axis clamping system for grid plates K0939 3-axis clamping system for T-slots K0940 5-axis clamping system for grid plates K0939 5-axis clamping system for T-slots K0940 Riser plates K0941 Seating ledges K0942 Jaw plates standard K0943 44 new article expanded article

Product overview Centric vices Centric vices jaw width 65 mm K1236 Centric vices jaw width 80–125 mm K1237 Attachment jaws stepped, with grip rail K0587 Step jaw attachment for 5-axis machining K1115 Inserts for stepped jaws K0591 Hinged stops K0607 Baseplate for centric vice K1274 Page 437 Page 438 Page 440 Page 441 Page 442 Page 442 Page 443 new article expanded article 45

Product overview NC vices NC vice jaw width 125 mm K1238 Attachment step jaw with gripper for NC vice K1273 Page 447 Page 448 46 new article expanded article

Stop with positive down force K0907 Base rails K0904 Seating ledges K0908 Keyway nuts round K0909 Page 459 Page 460 Page 461 Page 461 Product overview Multi-clamping system Multi-clamping system hard stops K0902 Multi-clamping system soft stops K0903 Wedge clamps jaw face smooth or serrated K0039 Wedge clamps machinable K0649 Stops K0905 Stop carbide-coated and serrated K0905 Stop prism K0906 Page 454 Page 455 Page 126, 456 Page 127, 457 Page 458 Page 458 Page 459 new article expanded article 47

K0004 Clamp straps with adjustment unit Size 1 e g n a r g n p m a c l i 18600 N Clamp strap width 36 mm 16700 N 30400 N 24500 N 24 35 slot width "B" 15 48 55 68 e g n a r g n p m a c l i e g n a r g n p m a c l i Size 2 18600 N 19500 N 30800 N Clamp strap width 36 mm 34200 N Size 3-5 20 31 slot width "B" 15 52 56 83 18300 N 29300 N 20500 N 34200 N Clamp strap width 36 mm 8 15 50 61 slot width "B" 16 103 Material: Base, ductile iron. Clamp strap and clamping screw carbon steel. Version: Black oxidised. Sample order: K0004.40X16 (include slot width B) Note: These clamp strap modules are universal, ﬂ exible clamps constructed from individual components building a compact unit. There are no loose parts which ﬁ rst have to be altered for a clamping operation. The compact design allows these clamps to be placed close to the workpiece enabling the full area of the machine table to be used. B 80-137 KIPP Clamp straps with adjustment unit Order No. K0004.10X K0004.20X K0004.30X K0004.40X K0004.50X Size 1 2 3 4 5 Clamp range 0-35 25-85 80-137 125-224 160-300 Slot width B to DIN 650 12/14/16/18 12/14/16/18 12/14/16/18 12/14/16/18 12/14/16/18 51

K0833 Clamping units pin-end strap max. min. 0 3 A Material, version: Body carbon steel, black oxidised. Strap carbon steel, tempered and black oxidised. Clamping screw carbon steel, tempered and black oxidised. Sample order: K0833.12105 Note: Both ends of the strap can be used for clamping workpieces. The clamps can be combined with other ﬁ xture elements, such as K0839, K0821, K0307. B E 0 2 K M G N J F D L H C K0833 K0839 KIPP Clamping units, pin-end strap Order No. K0833.12105 K0833.16110 52 A 105 110 B 168 188 C 150 190 D 40 50 E 70 75 F 70 90 G 30 40 H 18 24 J 40 50 K 5 5 L M12 M16 M 13 17 N 15 20 min. max. 35 45 75 95

K0839 Riser blocks Form P M L F N B H G K J A E D R C Material: Carbon steel. Version: Black oxidised. Sample order: K0839.12075 Note: These riser blocks Form P are used together with clamping straps to clamp high workpieces. K0833 K0839 R 30 30 40 40 53 KIPP Riser blocks Form P Order No. K0839.12075 K0839.12100 K0839.16075 K0839.16100 A 75 100 75 100 B 70 70 90 90 C 40 40 50 50 D 13 13 17 17 E 30 30 40 40 F M12 M12 M16 M16 G 24 24 30 30 H 15 15 20 20 J 4 3 4 3 K 5 5 5 5 L 20 20 20 20 M 20 20 20 20 N 35 35 45 45

E L L1 Material: Steel. 2 H 3 H H 1 B Version: Form A: Tempered and galvanized. Form B: Tempered and galvanized. Complete with DIN 787 screw for T-slots, DIN 6340 washer and DIN 6330B nut. Form C: Tempered and galvanized. Complete with DIN 6379 stud, DIN 6340 washer and DIN 6330B nut. Sample order: K1165.113115 Note: These clamp strap assemblies can be quickly and inﬁ nitely adapted to the clamping situation. The clamp straps have diff erent heel types both sides enabling the best end to be selected depending on the speciﬁ c application. These extremely versatile clamp straps are suitable for use by metal cutting or non-cutting machining and also for press and injection-moulding applications. Accessories: K1204 Adjustable heel supports K1165 Clamp strap assemblies E L1 B 1 H 4 H 2 H 3 H H L2 D D L2 D 1 B B L E L L2 D L1 2 H 3 H H 1 B A 1 H 4 H B C 1 H 4 H B 54

K1165 Clamp strap assemblies KIPP Clamp strap assemblies Order No. Form K1165.113115 K1165.117150 K1165.121187 K1165.125235 K1165.125285 A A A A A B 44 55 62 70 73 B1 30 41 30 30 30 D 13 17 21 25 25 E 11 12 14 17 17 H clamping range 0-55 0-70 0-80 0-100 0-100 H1 18 20 30 31 35 H2 H3 27 36 42 51 56 17 21 27 34 35 H4 12 17 20 24 24 L 115 115 115 150 150 150 150 187 187 187 187 235 235 235 235 L1 25 25 25 35 35 35 35 44 44 44 44 60 60 60 60 L 115 150 187 235 285 L2 30 30 30 36 36 36 36 44 44 44 44 47 47 47 47 L 115 115 150 150 150 150 187 187 235 235 235 235 L1 25 35 44 60 62 L2 30 36 44 47 51 Nominal slot size 10 12 14 12 14 16 18 16 18 20 22 20 22 24 28 L1 25 25 35 35 35 35 44 44 60 60 60 60 L2 30 30 36 36 36 36 44 44 47 47 47 47 Nominal slot size 10-12-14 12-14-16-18 16-18-20-22 20-22-24-28 20-22-24-28 Fastening screw(s) M10X100 M12X125 M12X125 M12X160 M12X160 M16X160 M16X160 M16X200 M16X200 M20X200 M20X200 M20X250 M20X250 M24X250 M24X250 Fastening screw(s) M12X100 M12X125 M12X125 M12X160 M16X125 M16X160 M20X160 M20X200 M20X200 M20X250 M24X200 M24X250 Clamping force kN 30 40 60 75 75 Clamping force kN 25 30 30 35 35 40 40 55 55 60 60 70 70 75 75 Clamping force kN 30 30 40 40 40 40 60 60 75 75 75 75 55 Order No. Form B B B B B B B B B B B B B B B with T-slot nut K1165.210115100 K1165.212115125 K1165.214115125 K1165.212150160 K1165.214150160 K1165.216150160 K1165.218150160 K1165.216187200 K1165.218187200 K1165.220187200 K1165.222187200 K1165.220235250 K1165.222235250 K1165.224235250 K1165.228235250 Order No. with stud K1165.312115100 K1165.312115125 K1165.312150125 K1165.312150160 K1165.316150125 K1165.316150160 K1165.320187160 K1165.320187200 K1165.320235200 K1165.320235250 K1165.324235200 K1165.324235250 B 44 44 44 55 55 55 55 62 62 62 62 70 70 70 70 Form C C C C C C C C C C C C B1 30 30 30 41 41 41 41 30 30 30 30 30 30 30 30 B 44 44 55 55 55 55 62 62 70 70 70 70 D 13 13 13 17 17 17 17 21 21 21 21 25 25 25 25 B1 30 30 41 41 41 41 30 30 30 30 30 30 E 11 11 11 12 12 12 12 14 14 14 14 17 17 17 17 H H1 H2 H3 H4 clamping range 0-40 0-55 0-55 0-70 0-70 0-70 0-70 0-80 0-80 0-80 0-80 0-100 0-100 0-100 0-100 18 18 18 20 20 20 20 30 30 30 30 31 31 31 31 27 27 27 36 36 36 36 42 42 42 42 51 51 51 51 17 17 17 21 21 21 21 27 27 27 27 34 34 34 34 12 12 12 17 17 17 17 20 20 20 20 24 24 24 24 D 13 13 17 17 17 17 21 21 25 25 25 25 E 11 11 12 12 12 12 14 14 17 17 17 17 H H1 H2 H3 H4 clamping range 0-30 0-55 0-50 0-70 0-40 0-70 0-40 0-80 0-70 0-100 0-50 0-100 18 18 20 20 20 20 30 30 31 31 31 31 27 27 36 36 36 36 42 42 51 51 51 51 17 17 21 21 21 21 27 27 34 34 34 34 12 12 17 17 17 17 20 20 24 24 24 24

K1204 Adjustable heel supports for clamp strap assembly D2 3 H H D1 D3 L1 L 1 H 2 H B D Material: Carbon steel. Version: Body tempered and galvanized. Support bolt tempered, grade 8.8. Sample order: K1204.1039 Note: These adjustable heel supports consist of support plate, support bolt and fastening screws for the strap heel support. Adjustable heel supports are used to increase the clamping height of the clamp strap assemblies. KIPP Adjustable heel supports for clamp strap assembly Order No. K1204.1039 K1204.1249 K1204.1294 K1204.1655 K1204.1690 K1204.2069 K1204.20109 56 B 30 42 42 50 50 50 50 D 13 17 17 21 21 25 25 D1 M10 M12 M12 M16 M16 M20 M20 D2 M5 M5 M5 M5 M5 M6 M6 D3 30 36 36 42 42 50 50 H clamping range 8-30 10-37 10-80 13-41 13-73 16-52 16-91 H1 39 49 94 55 90 69 109 H2 8 10 10 13 13 16 16 H3 10 16 16 20 20 25 25 L 44 54 54 60 60 70 70 L1 30 35 35 40 40 50 50

K0003 Clamp strap assemblies D D1 A 6 , 0 F G E1 E2 A F 1 B B L Material: Carbon steel. Screws tempered to 8.8. Version: Clamp painted. Screws black oxidised. Sample order: K0003.1616 Note: “F” is dependent on the depth of slot according to DIN 650. KIPP Clamp strap assemblies Order No. K0003.1010 K0003.1212 K0003.1214 K0003.1616 K0003.1618 K0003.2020 K0003.2022 L 80 100 100 125 125 160 160 A 15 20 20 25 25 30 30 B 30 40 40 50 50 60 60 B1 12 14 14 18 18 22 22 E1 15 21 21 26 26 30 30 E2 30 40 40 45 45 60 60 F 8-32 10-40 10-38 13-49 13-46 16-65 16-65 G for T-slot 10 12 14 16 18 20 22 D M10x80 M12x100 M12x100 M16x125 M16x125 M20x160 M20x160 D1 M10 M12 M12 M16 M16 M20 M20 F kN 13,9 20,2 20,2 37,8 37,8 58,8 58,8 57

K1205 Power clamp 2 H 1 B SW D2 1 H H Material: Carbon steel. Version: Forged, black galvanized. Sample order: K1205.012135 D D1 L1 L2 ≥ A / ≤ A L B Note: We recommend using a lubricating paste to reduce wear to the adjustment screw. Risers are available to increase the height of the power clamp. Supplied with clamping element, support element, DIN 508 slot key and grade 12.9 bolt. Application: The height of the clamping arm can be inﬁ nitely adjusted using the adjustment screw and the workpiece can then be clamped. Advantages: - Very high retaining forces of 30–49 kN. - Low height. - Simple element assembly. - Enables very fast, simple clamping. - Inﬁ nitely adjustable height and length. - Use in 14-28 mm T-slots or M12, M16, M20 grid systems. - Thrust pad available in smooth and serrated versions. Accessories: Raiser K1206 KIPP Power clamp Order No. Version K1205.112135 K1205.116135 K1205.116155 K1205.120175 K1205.212095 K1205.216110 long long long long short short 58 H2 6-68 6-68 5-80 7-88 6-50 6-50 A A min. max. 13 16 16 19 12 15 110 114 134 165 82 95 B 54 54 60 75 54 60 B1 18 18 20 25 18 20 Slot width 14 18 18 22 14 18 D M12 M16 M16 M20 M12 M16 D1 D2 13 17 17 21 13 17 M16 M16 M20 M24 M16 M20 H 36 36 42 52 36 42 H1 85 85 105 125 78 92 L 135 135 155 175 95 110 L1 13 16 16 19 12 15 L2 25 28 32 36 20 26 SW Clamping 8 8 10 12 8 10 force kN 30 30 43 49 32 40

K1206 Risers for power clamp D1 D L1 L2 L H B Material: Carbon steel. Version: Forged, black galvanized. Sample order: K1206.012060 KIPP Raiser for power clamp Order No. Version K1206.012060 K1206.016070 K1206.020080 K1206.112060 K1206.116070 long long long short short Slot width 14 18 22 14 18 B 45 48 58 D D1 M12 M8 M16 M12 M20 M12 44,5 M12 M8 47,5 M16 M12 H 60 70 80 60 70 L 135 155 175 L1 L2 12 127 16 145 19 165 95 12 88 110 16 100 Clamping force kN 30 43 49 32 40 K1215 Thrust pads for power clamp A B B B H H L L KIPP Thrust pads for power clamp Order No. Form A smooth K1215.025 K1215.030 K1215.036 Order No. Form B serrated K1215.125 K1215.130 K1215.136 B 18 20 25 Application: The raiser is positioned and fastened to the machine table, the power clamp is then screwed onto the raiser. By turning the adjustment screw on the power clamp, the height of the clamping arm can be inﬁ nitely adjusted and the workpiece clamped. Advantages: - Other clamping heights can be achieved by mounting multiple risers one on the other. - Inﬁ nite transition between clamping heights. - Simple element assembly. - For use in 14-28 mm T-slots or M12, M16, M20 grid systems. Material: Stainless steel Sample order: K1215.025 Note: Power clamps can be ﬁ tted with serrated or smooth thrust pads. H 19,5 24 28 L 25 30 36 59

K0841 Clamping units J D A H N S socket screw DIN 912 K L SW M Q R coupling P E F G C B Material: Riser and clamp strap high-strength aluminium. Accessories carbon steel. Version: Riser and clamp strap anodized. Accessories black oxidised. Sample order: K0841.12050055 Note: Clamping units can be combined with risers and positioning units to form a clamping module. By using risers the height of the clamping units can be increased almost indeﬁ nitely. KIPP Clamping units Order No. Version A B K0841.16055068 short 55-80 100 K0841.16055093 long 55-80 150 C 45 45 D 34 34 E 24 24 F 26 51 G 17 17 H 24 24 J 22 22 K 27 27 L 36,5 36,5 M 18 18 N 35 60 P 68 93 Q 22 22 SW R S 4 M16x75 4 M16x75 32 32 60

K0842 Clamp strap unit P socket srew DIN 912 N M J D A K positioning element H C E F G B clamp strap workpiece positioning module adjusting screw overhang base Material: Strap high-strength aluminium. Accessories carbon steel. Version: Clamp strap anodized. Accessories black oxidised. Sample order: K0842.30016025 Note: The clamp strap unit is mounted directly onto a positioning module. The height of the clamp strap can be individually adjusted with a socket head screw (height adjustment 23-55 mm). For clamping heights 0-23 mm a connecting bush (K0850.700) must be used. To secure the clamp tighten the adjusting screw located on the wide face of the upper slide. The upper part of the positioning module must not project over the edge of the base if this is used to support a workpiece. KIPP Clamp strap unit Order No. A B K0842.30016025 25-55 100 C 45 D 34 E 24 F 26 G 35 H 17 J 22 K 24 L 25 M 85 P N 27 M16 x 75 61

K0843 Riser blocks F coupling J H coupling G A C D E B Material: Riser blocks high-strength aluminium. Connecting bolts and clamp screws carbon steel. Version: Riser blocks anodized. Connecting bolts and clamp screws black oxidised. Sample order: K0843.16025068 Note: The height of clamping units can be increased as required using these riser blocks. short short short long long Use long connecting screws for mounting directly onto the tooling plate. Use short connecting screws for mounting onto a positioning unit. connecting screw long connecting screw short connecting bolt KIPP Riser blocks Order No. Version K0843.16025068 K0843.16050068 K0843.16100068 K0843.16025093 K0843.16050093 K0843.16100093 short short short long long long 62 A 25 50 100 25 50 100 B 68 68 68 93 93 93 C 45 45 45 45 45 45 D 18 18 18 18 18 18 E 35 35 35 60 60 60 F 25 25 25 25 25 25 G 9 9 9 9 9 9 H 22 22 22 22 22 22 J 4 4 4 4 4 4 Matching clamping units K0841.16055068 K0841.16055068 K0841.16055068 K0841.16055093 K0841.16055093 K0841.16055093

K0844 Connecting screws short B D C E A KIPP Connecting screws short Order No. K0844.16025 A 28 B 35 C 19 D 16 E M16 K0845 Connecting screws long Material: Carbon steel. Version: Black oxidised. Sample order: K0844.16025 Note: Short connecting screws are used for the quick positioning and locking of clamping units onto positioning units. See application example K0843. D C B E A KIPP Connecting screws long Order No. K0845.42216025 A 28 B 51 C 35 D 16 E M16 Material: Carbon steel. Version: Black oxidised. Sample order: K0845.42216025 Note: Long connecting screws are used for quick positioning and locking the clamping units directly onto a tooling plate. See application example K0843. 63

K0846 Positioning units 0,8 E S T F T 0,8 2 0 , 0 ± A 1 0 , 0 0 - C base E P H8 R F Q K F L M D base J N hole for DIN 913 cap screw G H Material: Carbon steel. Version: Ground, black oxidised. Sample order: K0846.20012050 0,8 1 0 , 0 ± B Note: Positioning units allow workpieces and clamping units to be positioned anywhere on the tooling plate (travel 40-50 mm). Graduation marks on the slides allow the position to be read, and the clamping ﬁ xture construction to be documented. Positioning units are modules that can be combined with wedge clamps, stops and clamping units to form a ﬂ exible clamping ﬁ xture. KIPP Positioning units Order No. K0846.20016063 A 63 B 43 C D E F 23 123 98 48 G 50 H 24 J K L 17 32 34 M 25 N P Q R S T M16 25 M16x19 M6x12 M10 25 65

K0846 Technical notes for positioning units Positioning units allow parts to be located at any desired position on the grid plate. grid hole e g n e l r a v tr a locking screw set screw Note: Use socket head screws to secure the base. Tighten locking screws to lock the lower slide after positioning. The set screw allows the slide pressure to be adjusted. The graduations on the base unit allow you to read off the position and to document the adjustment path. socket head screw DIN 912 grid hole increments rest pad socket head screw connecting bush support block set screw set screw To secure, tighten the set screw. Secure support block on top slide with socket head screws. To secure, tighten the set screw. 66

K0846 Example of positioning unit use The micrometer eases the precise positioning of the locating pin on the base unit to a desired distance from a grid hole on the grid plate. locating pin for workpiece micrometer grid hole positioning unit One application is positioning workpieces which have pre-drilled holes. workpiece locating pin positioning unit 67

K0847 Connecting bolts E D Material: Carbon steel. Version: Black oxidised. Sample order: K0847.42016025 Note: Connecting bolts are used for quickly positioning and locking clamping units (K0841.16055068) on positioning units. See application example K0843. A 28 B 35 C 25 D 9,5 E 16 B -0,03 -0,08C A KIPP Connecting bolts Order No. K0847.42016025 K0848 Rest pads 0,8 1 0 , 0 ± C E 0,8 D A F Bf7 8 , 0 8 , 0 Material: Carbon steel. Version: Case-hardened and ground. Sample order: K0848.55016040 Note: These rest pads are for supporting workpieces on positioning units. KIPP Rest pads Order No. K0848.55016040 68 A 40 B 25 C 17 D 19 E 36 F M16

K0849 Support blocks 0,8 1 0 , 0 ± E C 0,8 G A F D B Material: Carbon steel. Version: Case-hardened, ground, black oxidised. Sample order: K0849.60016017 Note: Support blocks are used to support workpieces on positioning units. KIPP Support blocks Order No. K0849.60016017 K0850 A 30 B 48 C 17 D 32 E 10 F M16 G for socket head screw M6 Connecting bushes B A C Material: Carbon steel. Version: Case-hardened and black oxidised. Sample order: K0850.70016025 KIPP Connecting bushes Order No. K0850.70016025 A 25 B 18 C M16 69

K0834 Clamp straps pin-end K0834.08063 K0834.08075 2 1 5 9 Material: Carbon steel. M8 9 Version: Tempered and black oxidised. 0 1 9 1 Sample order: K0834.08063 8 18 B A C Note: Pin-end straps can be used in conjunction with other ﬁ xture elements, such as K0839, K0821, K0307. K0834.12150 K0834.16190 K L G J M H B D E F C A KIPP Pin-end straps Order No. K0834.08063 K0834.08075 KIPP Pin-end straps Order No. K0834.12150 K0834.16190 70 A 63 75 B 15 20 C 14 20 A 150 190 B 40 50 C 15 20 D 20 25 E 65 80 F 30 36 G 30 40 H 18 24 J 13 18 K 20 28 L 4 5 M M12 M16

K0002 Clamp straps goose-neck C K 2 ° L H D G A J F BE Material: Carbon steel 1.7225 Version: Tempered to 1000 N/mm², black oxidised. Sample order: K0002.10 KIPP Clamp straps goose-neck Order No. K0002.10 K0002.16 A 110 165 B 36 50 C 27 50 D 102 145 E 29 40 F 16 25 G 54 70 H 31 60 J 4 5 K 15 24,5 L 13 18 71

K0835 Clamp straps KIPP Clamp straps Order No. K0835.08063 K0835.08080 K0835.08100 K0835.10063 K0835.10080 K0835.10100 K0835.10125 K0835.10160 K0835.12063 K0835.12080 K0835.12100 K0835.12125 K0835.12160 K0835.16080 K0835.16100 K0835.16125 K0835.16160 K0835.20100 K0835.20125 K0835.20160 K0835.20200 72 A 63 80 100 63 80 100 125 160 63 80 100 125 160 80 100 125 160 100 125 160 200 B C D G H FE Material: Carbon steel. Version: Tempered and black oxidised. Sample order: K0835.08063 K0834 K0002 K0835 K0837 A B 19 24 30 19 24 30 40 55 19 24 30 40 55 27,5 34 42,5 55 34 42,5 55 68,5 K0866 K0825 K0697 K0018 F 25 25 25 25 25 25 32 32 32 32 32 32 32 32 38 38 38 38 38 38 50 E 9 9 9 11 11 11 11 11 13 13 13 13 13 17 17 17 17 21 21 21 21 C 25 32 40 25 32 40 45 50 25 32 40 45 50 25 32 40 50 32 40 50 63 D 19 24 30 19 24 30 40 55 19 24 30 40 55 27,5 34 42,5 55 34 42,5 55 68,5 G 12 12 16 12 16 16 19 19 16 16 19 19 25 16 19 19 25 19 25 25 25 H 7 7 10 7 10 10 13 13 10 10 13 13 15 10 13 13 15 13 15 15 15

K0836 Clamp straps tapped both ends C B D E D F H H A KIPP Clamp straps, tapped both ends Order No. K0836.08063 K0836.08080 K0836.10080 K0836.10100 K0836.10125 K0836.12100 K0836.12125 K0836.12160 K0836.16125 K0836.16160 K0836.16200 K0836.20125 K0836.20160 K0836.20200 A 63 80 80 100 125 100 125 160 125 160 200 125 160 200 B 25 25 25 25 25 32 32 32 38 38 38 38 38 50 C 12 12 16 16 16 19 19 22 19 22 25 22 22 25 G D 12 17 14 20 30 20 30 45 30,5 43 58 27,5 40 55 Material: Carbon steel 1.0503. Version: Tempered and black oxidised. Sample order: K0836.08063 E 25 32 32 40 45 40 45 50 40 50 60 40 50 60 F 7 7 10 10 10 10 10 10 12 12 12 15 15 15 G 9 9 11 11 11 13 13 13 17 17 17 21 21 21 H M8 M8 M10 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 Clamping Tightening force N 6900 6900 11300 11300 11300 16700 16700 16700 18000 18000 20200 19700 19700 22900 torque max. Nm 22 22 45 45 45 80 80 80 115 115 129 157 157 183 73

K0837 Clamp straps tapped heel Material: Carbon steel. G 5 Version: Tempered and black oxidised. Sample order: K0837.08040 D C B H E F A B 10 12 12 12 15 15 15 15 14 20 20 20 20 18 25 25 25 32 32 KIPP Clamp straps, tapped heel Order No. K0837.08040 K0837.08050 K0837.08063 K0837.10050 K0837.10063 K0837.10080 K0837.10100 K0837.10125 K0837.12063 K0837.12080 K0837.12100 K0837.12125 K0837.12160 K0837.16080 K0837.16100 K0837.16125 K0837.16160 K0837.20160 K0837.20200 74 A 40 50 63 50 63 80 100 125 63 80 100 125 160 80 100 125 160 160 200 C 6 14 27 8 18 32 40 50 14 25 40 50 60 17 30 45 65 60 80 D 16 16 16 20 20 23 35 50 24 24 29 44 69 30 30 40 55 52 72 E 9 9 9 11 11 11 11 11 13 13 13 13 13 17 17 17 17 21 21 F 19 19 19 25 25 25 25 25 32 32 32 32 32 38 38 38 38 50 50 G 12 12 12 12 12 16 16 16 16 16 19 19 19 19 25 25 25 25 25 H M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M16 M16 M16 M16 M20 M20

K0838 Clamp straps tapped heel C B D F H E A KIPP Clamp straps, tapped heel Order No. K0838.08063 K0838.08080 K0838.10080 K0838.10100 K0838.10125 K0838.12100 K0838.12125 K0838.12160 K0838.16125 K0838.16160 K0838.16200 K0838.20160 K0838.20200 K0838.20250 A 63 80 80 100 125 100 125 160 125 160 200 160 200 250 B 19 19 25 25 25 32 32 32 38 38 38 50 50 50 C 12 12 16 16 16 19 19 19 25 25 25 25 32 32 G D 19 19 25 25 25 28 28 28 36 36 36 45 45 45 Material: Carbon steel 1.0503. Version: Tempered and black oxidised. Sample order: K0838.08063 E 36 53 45 65 90 60 85 120 73 108 148 90 130 180 F 7 7 10 10 10 10 10 10 12 12 12 15 15 15 G 9 9 11 11 11 13 13 13 17 17 17 21 21 21 H M8 M8 M10 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 Clamping Tightening force N torque max. Nm 3200-8000 3500-8600 6800-16900 7300-18300 7700-19300 10200-25600 11000-27500 11600-29000 12100-30300 13200-33000 13900-34700 15000-36000 16000-37000 17000-38000 17 17 45 45 45 80 80 80 129 129 129 183 183 183 75

K0859 Clamp springs DIN 316 Material: Thrust and retaining ring carbon steel, spring spring steel Version: Thrust and retaining ring black oxidised. Spring bright. Sample order: K0859.12046 D E B C A KIPP Clamp springs Order No. K0859.08029 K0859.12046 K0859.16050 76 A 29 46 50 B 2 3 4 C 6 8 8 D 8,5 13 16,5 E 16 25 28 Wing nuts to DIN 316 M4x6 M4x10 M5x10

K0014 Hook clamps ground Form A/B/C DIN 912 F 1 H A 3 H H 0,8 2 H 8 , 0 D h7 R 1 D B B 3 H DIN 912 C L H 0,8 2 H F 1 H DIN 912 4 H 5 H F 8 , 0 D h7 R K0017 1 D B 2 D KIPP Hook clamps, ground, Form A/B/C Order No. Form K0014.110030 K0014.110040 K0014.208020 K0014.208025 K0014.208030 K0014.212040 K0014.212050 K0014.212060 K0014.216040 K0014.216050 K0014.216060 K0014.312140 K0014.312150 K0014.312160 K0014.316150 K0014.316160 A A B B B B B B B B B C C C C C D 20 20 18 18 18 25 25 25 32 32 32 25 25 25 32 32 D1 D2 25 25 22 22 22 32 32 32 36 36 36 - - - - - - - - - - - H 75 75 58 58 58 92 92 92 101 101 101 32 M12 92 32 M12 92 32 M12 92 36 M12 101 36 M12 101 H1 H2 H3 H4 54 54 37 37 37 66 68 68 75 75 75 66 68 68 75 75 30 30 23 23 23 39 39 39 39 39 39 39 39 39 39 39 9 9 2 2 2 11 11 11 15 15 15 11 11 11 15 15 10 10 7 7 7 12 12 12 15 15 15 10 13 13 16 16 Material: Carbon steel, tempered. Version: Black oxidised. Shaft OD ground. Sample order: K0014.216040 Note: The stated clamping forces (F max.) and tightening torques are valid within the stated clamping ranges (H5). hook clamp K0014 hook clamp holder K0017 riser bar K0018 The clamping height can be adjusted by using hook clamp holders and riser bars to suit individual circumstances. H5 max. clamping range 12 12 10 10 10 15 15 15 15 15 15 15 15 15 15 15 B 12 12 10 10 10 18 18 18 22 22 22 18 18 18 22 22 L - - - - - - - - - - - 31 38 46 38 46 R 30 40 20 25 30 40 50 60 40 50 60 40 50 60 50 50 Socket head screw DIN 912 M10x65 M10x65 M8x50 M8x50 M8x50 M12x80 M12x80 M12x80 M16x85 M16x85 M16x85 M12x80 M12x80 M12x80 M16x85 M16x85 Tightening torque max. Nm F max. kN 37,2 31,4 37,2 32,3 29,4 58,8 49 45,1 166,6 147 127,4 58,8 49 45,1 147 127,4 13 9,8 13,6 10,9 9 17,5 14 11,6 37,9 30,4 25,2 22,6 18,5 15,2 38 33 77

K0017 Hook clamp holders 2 L 3 L L 1 L D3 D F7 D2 Material: Carbon steel. Version: Black oxidised. Sample order: K0017.12080 SW Note: Hook clamp holders are for holding and raising hook clamps. D1 D3 24 32 32 40 40 50 50 hook clamp K0014 hook clamp holder K0017 riser bar K0018 The clamping height can be adjusted by using hook clamp holders and riser bars to suit individual circumstances. L 55 63 80 80 100 80 100 L1 74 93 110 110 130 110 130 L2 25 30 30 40 40 40 40 L3 20 21 23 25 28 25 28 SW 22 30 30 36 36 46 46 Tightening torque max. Nm 29,4 39,2 39,2 49 49 78,4 78,4 KIPP Hook clamp holders Order No. K0017.08055 K0017.10063 K0017.10080 K0017.12080 K0017.12100 K0017.16080 K0017.16100 78 D 18 20 20 25 25 32 32 D1 M8 M10 M10 M12 M12 M16 M16 D2 M8 M12 M12 M12 M12 M16 M16

K0851 Hook clamp holders G K A B JE F D 1 , 0 + C H Material: Carbon steel 1.0503. Version: Black oxidised. Sample order: K0851.08025 K0014 KIPP Hook clamp holders Order No. K0851.08025 K0851.10030 K0851.12040 K0851.16040 A 25 30 40 40 B 10 12 14 16 C 18 20 25 32 D 24 28 35 42 E 50 60 75 85 F 38 45 55 65 G 24 28 35 42 H 6,6 9 11 13,5 J 15 20 20 25 K 11,3 13,4 15 20,2 79

K0015 Hook clamps with collar D Material: Hook clamps and hook clamp holders carbon steel, tempered. Version: Black oxidised. Sample order: K0015.12060 Note: Hook clamps with collar can be screwed directly into grid holes etc. without counterbore. For suitable riser elements, see riser bars K0018. 3 H 4 H 2 H F 1 H H 5 H D1 R C B SW H H1 clamping range 35 - 45 35 - 45 35 - 45 45 - 55 45 - 55 45 - 55 50 - 65 50 - 65 50 - 65 65 - 80 65 - 80 65 - 80 50 - 65 50 - 65 50 - 65 65 - 80 65 - 80 65 - 80 6 6 6 16 16 16 10 10 10 25 25 25 10 10 10 25 25 25 KIPP Hook clamps with collar Order No. K0015.08020 K0015.08025 K0015.08030 K0015.08120 K0015.08125 K0015.08130 K0015.12040 K0015.12050 K0015.12060 K0015.12140 K0015.12150 K0015.12160 K0015.16040 K0015.16050 K0015.16060 K0015.16140 K0015.16150 K0015.16160 80 D 22 22 22 22 22 22 32 32 32 32 32 32 36 36 36 36 36 36 D1 M8 M8 M8 M8 M8 M8 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 H2 14 14 14 14 14 14 27 29 29 27 29 29 36 36 36 36 36 36 H3 H4 2 2 2 2 2 2 11 11 11 11 11 11 15 15 15 15 15 15 7 7 7 7 7 7 10 12 12 10 12 12 15 15 15 15 15 15 H5 19 19 19 19 19 19 30 30 30 30 30 30 30 30 30 30 30 30 B 10 10 10 10 10 10 18 18 18 18 18 18 22 22 22 22 22 22 C 25 25 25 25 25 25 40 40 40 40 40 40 40 40 40 40 40 40 R 20 25 30 20 25 30 40 50 60 40 50 60 40 50 60 40 50 60 SW Tightening F 22 22 22 22 22 22 36 36 36 36 36 36 36 36 36 36 36 36 torque max. kN max. Nm 20 20 20 20 20 20 45 45 45 45 45 45 60 60 60 60 60 60 7,9 7,3 6,7 7,9 7,3 6,7 13,5 12,6 11,7 13,5 12,6 11,7 13,4 12,4 12 13,4 12,4 12

K0018 Riser bars 2 L L 1 L D3 D2 hook clamp K0014 hook clamp holder K0017 riser bar K0018 The clamping height can be adjusted by using hook clamp holders and riser bars to suit individual circumstances. KIPP Riser bars Order No. K0018.08032 K0018.08040 K0018.08050 K0018.08065 K0018.12050 K0018.12065 K0018.12080 K0018.12100 K0018.12125 K0018.12160 K0018.12200 K0018.16050 K0018.16065 K0018.16080 K0018.16100 K0018.16125 K0018.16160 K0018.16200 D1 M8 M8 M8 M8 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 SW Material: Carbon steel. Version: Black oxidised. Sample order: K0018.16050 Note: The height of the hook clamps and hook clamp holders can be raised using these riser bars. D1 D2 M8 M8 M8 M8 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 D3 24 24 24 24 40 40 40 40 40 40 40 50 50 50 50 50 60 60 L 32 40 50 65 50 65 80 100 125 160 200 50 65 80 100 125 160 200 L1 51 59 69 84 80 95 110 130 155 190 230 80 95 110 130 155 190 230 L2 20 20 20 20 35 35 35 35 35 35 35 35 35 35 35 35 35 35 SW 22 22 22 22 36 36 36 36 36 36 36 46 46 46 46 46 55 55 Tightening torque max. Nm 29,4 29,4 29,4 29,4 49 49 49 49 49 49 49 78,4 78,4 78,4 78,4 78,4 78,4 78,4 81

K0012 Hook clamps D2 D1 2 R F ° 5 2 3 H B H 1 H Material: Carbon steel, tempered. Version: Black oxidised. Sample order: K0012.10 D1 2 R ° 5 2 3 H F D3 -0,02 D -0,10 2 , 3 D3 -0,02 D -0,10 2 , 3 R 1 B R 1 B A H 2 H 1 H R R D3 10 12 14 17 H 42 52 66 83 H 41,5 51,5 65,5 82,5 H1 20 25 32 40 H1 20 25 32 40 H2 6 8 10 12 H3 9,5 11,5 15,5 19,5 H3 10 12 16 20 B 11 15 17 20 B 11 15 17 20 R 9 12 14 18 R1 20 25 32 40 R 9 12 14 18 R1 20 25 32 40 R2 30 50 60 80 R2 30 50 60 80 F max. kN 4,8 8,8 13,9 20,2 F max. kN 4,8 8,8 13,9 20,2 KIPP Hook clamps Order No. Form K0012.06 K0012.08 K0012.10 K0012.12 A A A A D 16 20 25 32 D1 6,5 8,5 10,5 12,5 D2 11 15 18 20 Order No. Form K0012.106 K0012.108 K0012.110 K0012.112 B B B B D 16 20 25 32 D1 6,5 8,5 10,5 12,5 D3 10 12 14 17 82

K0013 Hook clamps with collar 3 H 2 L 2 H 1 L D1 D2 Material: Carbon steel. Version: Tempered and black oxidised. Sample order: K0013.06 1 H H T H11 R 1 L P D R KIPP Hook clamps with collar Order No. K0013.06 K0013.08 K0013.10 K0013.12 K0013.16 D M6 M8 M10 M12 M16 D1 D2 20 20 25 32 40 6 6 8 10 12 H 56 56 72 88 H1 60 60 79 96 H2 53 53 67 82 109 118 102 H3 10 10 12 16 20 L 11 11 15 17 20 L1 9 9 13 18 22 L2 8 8 10 12 12 P 8 8 10 12 16 R 9 9 12 14 18 R1 20 20 25 32 40 T 17 17 19 27 32 Clamping force kN 4,82 8,77 13,9 20,2 37,8 83

K0912 Swing clamps G K M L S D T 3 holes for screwing in the handle (angle between each hole is 35°) 3 possible handle positions F R C A J t h g e h i U P Ø E Ø B i g n p m a c . n m i l Material: Carbon steel. Ball knob plastic. Version: Tempered and black oxidised. Ball knob Duroplast PF 31, black. Sample order: K0912.013232 Note: * Admissible hand force to operate the handle. Accessories: Standard handles K0915. Screw-in handles with adjustable torque K0916. Clamping arm for swing clamp K0912.03006010 and K0912.04007516. Right hand unclamped position V 6 5 ° N Left hand travel end point recommended clamping position start point 6 5° 65° 1 6 5 ° 5 0 ° travel recommended clamping position 5 ° 6 end point unclamped position travel ° 0 5 ° 5 6 1 start point travel KIPP Swing clamps Order No. Order No. left right Grip A A min. max. B C D E F G J K L M N P R S T K0912.003232 K0912.103232 without grip 31,4 32,6 30 46 18 30 10 32 14 25 M6 15 17 51 57,5 M4x8 M5 K0912.004540 K0912.104540 without grip 44,1 45,9 40 63 25 38 13 40 16 32 M8 20 22,5 69,5 78,1 M6x12 M6 U - - V Clamping Hand force FH N force N - - 800 1200 K0912.013232 K0912.113232 with grip 31,4 32,6 30 46 18 30 10 32 14 25 M6 15 17 51 57,5 M4x8 M5 20 73 800 K0912.014540 K0912.114540 with grip 44,1 45,9 40 63 25 38 13 40 16 32 M8 20 22,5 69,5 78,1 M6x12 M6 25 107 1200 84 150* 200* 150* 200*

K0912 Technical Information for swing clamps left hand (handle at end point) rest pad K0307 left hand (handle at end point) customised riser Mounting an attachment clamping arm spanner attachment When mounting an attachment on the clamping arm, use a spanner to lock the arm and prevent it from turning. Notes 85

K0913 Swing clamps (high force) D C A H j e g n a r t n e m t s u d a t h g e h g n p m a c l i i 0 1 e g n a r g n p m a c U i l i t h g e h g n p m a c l i adjustment knob F G Left hand end point Right hand clamp start point Ø R L N M Q 90° 4 5 ° T S Ø E Ø B Material: Carbon steel. Grip plastic. Version: Tempered and black oxidised. Grip black Duroplast PF 31. Sample order: K0913.017030 Note: * Admissible hand force for the handle. P J K 9 0 ° KIPP Swing clamps (high force) Order No. Order No. left right K0913.017030 K0913.117030 K0913.018038 K0913.118038 A A min. max. 70 80 80 90 86 1 6 0 ° travel ° 0 6 1 travel end point clamp start point B C D E F G H J K L M N P Q R S T U Clamping Hand force Holding force FH N force N N 40 22 16 38 16 30 120 40 13 50 20 42 M8 125 23 28 M6x12 1,2 3500 50 25 20 48 24 38 137 50 18 60 25 48 M12 160 28 35 M8x16 1,6 6000 600* 600* 8000 14000

K0913 Technical information for swing clamps (high force) thrust bolts K0307 right-hand type (handle at ﬁnal point) right-hand type (handle at ﬁnal point) custom riser Holding forces for workpiece processing Top Installation workpiece max. holding force ﬁxture plate top screw-wrench clamping arm When mounting an attachment on the clamping arm, use a spanner to lock the arm and prevent it from turning. K0913. performance curve ) N ( e c r o f g n p m a c l i 8000 7000 6000 5000 4000 3000 2000 1000 K0913. ..18038 K0913. ..17030 0 100 200 300 400 500 600 hand force (N) 87

K0912 Clamping arms for swing clamp B C F ball plungers Material: Carbon steel. Version: Black oxidised. Sample order: K0912.03006010 A D Ø E F8 clamping arm length C vs. clamping force 1200 1100 1000 900 800 700 600 500 K0912....4540 K0912....3232 35 0 32 clamping arm length (mm) 50 45 40 55 ) N ( e c r o f g n p m a c l i clamping arm length C vs. deﬂexion during clamping K0912....4540 K0912...3232 0.6 0.5 0.4 0.3 ) m m ( n o i x e ﬂ e d 32 35 0 clamping arm length (mm) 50 40 45 55 KIPP Clamping arms for swing clamp Order No. K0912.03006010 K0912.04007516 88 A 30 40 B 60 75 C 45 55 D 12 16 E 10 16 F M4 M5

K0915 Handles screw-in D A W S C EØ B Material: Grip carbon steel. Ball knob Duroplast PF 31. Version: Grip, black oxidised. Ball knob, black. Sample order: K0915.5059 KIPP Handles screw-in Order No. K0915.05059 K0915.06089 A 59 89 B 20 25 C 8 10 D 5 6 E M5 M6 SW 7 8 89

K0916 Handles screw-in with torque limit locknut F Ø J E D H B A adjustment travel to limit torque set screw grip l e b a t s u d a j e c r o f d n a h G Material: Carbon steel. Version: Hardened, black oxidised. Sample order: K0916.05090 Note: The desired clamping force can be set by using the set screw to alter the torque. The handle snaps 15° when the set torque is achieved. C Ø ° 5 1 K set screw adjustable hand force snaps horizontally locknut Note: Ensure that the handle is set to snap horizontally. KIPP Handles, screw-in, with torque limit Order No. K0916.05090 K0916.06119 90 A 89,5 119 B 60 84 C 13 15 D 18,5 23 E 6,5 8 F 8 10 G 12 14 H 5,5 6,5 J M5 M6 K M5x16 M6x20 Hand force FH N 0-150 0-200

K0916 Performance curves set screw with hex socket torque limit setting adjustable torque wrench grip Pull Clamps K0910.3240... Pull Clamps K0910.4050... ) N ( e c r o f g n p m a c l i 1000 900 800 700 600 500 400 300 200 100 0 30 35 50 Torque limit setting (mm) clamping force ) N ( e c r o f g n p m a c l i hand force 95 120 70 3 4 5 0.5 1 2 If clamping force is 900 N, Load-Setting Distance will be 5 mm. Hand force will be 120 N. ) N ( e c r o f g n p m a c l i 1000 900 800 700 600 500 400 300 200 100 0 Swing Clamps K0912....3232 clamping force ) N ( e c r o f g n p m a c l i hand force 95 120 35 30 0.5 1 50 2 70 3 4 5 3000 2500 2000 1500 1000 500 clamping force hand force 0 50 0.5 70 2 100 4 130 160 6 8 Torque limit setting (mm) Swing Clamps K0912....4540 clamping force hand force 100 130 160 50 70 0.5 2 4 6 8 1400 1200 1000 800 600 400 200 0 Torque limit setting (mm) Torque limit setting (mm) Side Clamps K0928.0500 Side Clamps K0928.0501 clamping force ) N ( e c r o f g n p m a c l i hand force 30 35 0.5 1 50 2 70 3 95 4 120 5 ) N ( e c r o f g n p m a c l i 3500 3000 2500 2000 1500 1000 500 0 Side Clamps K0928.0800 Side Clamps K0928.0801 clamping force hand force 70 2 100 4 130 6 160 8 4500 4000 3500 3000 2500 2000 1500 1000 500 0 50 0.5 Torque limit setting (mm) Torque limit setting (mm) Note: The above performance curves apply to degreased clamps 91

K0925 Swing clamps mini, with cam lever 45° start point 4 9 5 0 ° ° recommended clamping position S D end point E B A I l e v a r t p m a c l Material: Carbon steel. Version: Tempered and black oxidised. Sample order: K0925.0100 T R Note: Swing clamps are used where the clamping points must be free when the workpiece is loaded or removed. * Admissible hand force for the handle. Q Left hand 70° P C Right hand G H N J M L 7 0 ° K V U 20° unclamped unclamped position 1 3 5 ° Y X clamping rough surfaces clamping machined surfaces KIPP Swing clamps, mini, with cam lever O l a v a r t l a t o t swivel clamp Order No. Order No. left right A B C D E G H I J K L M N O P Q R S T U X X Y V min. max. min. max. Y K0925.0100 K0925.1100 30 10 18 18 52 26 22 0,8 6 11,5 8 4,3 50 1,2 16 36 6 22,8 M4 4,3 27 22,4 25,2 22 24,8 K0925.0150 K0925.1150 40 14 23 23 68 35 30 1 8 15,3 10 5,3 63 1,5 19 45 8 28,5 M5 5,3 34 30,8 33,8 31,7 34,7 1500 K0925.0200 K0925.1200 50 18 30 30 87 45 37 1,2 8 20,7 16 8,4 80 1,8 24 65 12 45,5 M8 8,4 48 31,9 39,6 32,9 40,6 2100 K0925.0300 K0925.1300 60 22 40 40 107 55 45 1,5 8 25,4 20 10,4 100 2,3 30 85 15 57 M10 10,5 64 35,7 46,7 38,2 49,2 2800 Clamping Hand force force N 800 FH N 100* 150* 200* 300* 92

K0926 Swing clamps mini B F X A D E S view X T R I l e v a r t p m a c l C Right hand swivel range Q Left hand recommended clamping position 5° clamp travel unclamped position 5° L G H J 7 0 ° K end point 5° recommended clamping position 7 0 ° end point travel path 2 0 ° N 70° U V ° 0 5 start point M 2 0 ° P 100° unclamped position 5 ° 0 ° 7 clamp travel swivel range 1 0 0 ° 5 0 ° ° 0 2 travel path start point Material: Carbon steel. Grip plastic. Version: Tempered, black oxidised. Grip black. Sample order: K0926.0100 Note: Swing clamps are used where the clamping points must be free when the workpiece is loaded or removed. * Admissible hand force for the handle. unclamped swivel Y X clamping rough faces clamping machined faces O h t a p l e v a r t 3 0 ° travel path The position of the grip can be adjusted in 30° increments clamp KIPP Swing clamps mini Order No. Order No. left right A B C D E F G H I J K L M N O P Q R S T U X X V min. max. min. max. Y Y Clamping Hand force force N K0926.0100 K0926.1100 30 10 18 18 45,8 49 26 22 1 6 11,5 8 4,3 50 0,8 15 36 6 22,8 M4 4,3 27 22,3 25,3 21,9 24,9 1100 K0926.0150 K0926.1150 40 14 23 23 61,3 66 35 30 1,4 8 15,3 10 5,3 63 1,1 20 45 8 28,5 M5 5,3 34 30,6 34 31,5 34,9 1800 K0926.0200 K0926.1200 50 18 30 30 76,5 82 45 37 1,5 8 20,7 16 8,4 80 1,4 26 65 12 45,5 M8 8,4 48 31,7 39,7 32,7 40,7 2200 K0926.0300 K0926.1300 60 22 40 40 93 100 55 45 1,9 8 25,4 20 10,4 100 1,7 33 85 15 57 M10 10,5 64 35,5 46,9 38 49,4 3500 FH N 100* 150* 200* 300* 93

K0927 Swivel hold-down clamp mini, with cam lever C D unclamped position 1 3 5 ° F G S B T A O l e v a r t l a t o t E M Q H J L K P N I start point 45° recommended clamping position 4 5 ° 9 0 ° end point “X” Material: Carbon steel. Sample order: K0927.100 R Note: Swing clamps are used where the clamping points must be free when the workpiece is loaded or removed. * Admissible hand force for the handle. view X l e v a r t unclamped unclamped i g n p m a c l Y X clamping rough faces clamping machined faces KIPP Swivel hold-down clamp, mini, with cam lever Order No. A B C D E F G H I J K L M N O P Q R S T X min. K0927.100 45 10 25,5 25 16 50 89 42 1 32 26 22 18 20 1,5 11 5,5 8 24 M6 31,5 K0927.150 55 12 32 31 20 63 109 52 1,2 40 32 28 22 25 1,8 14 6,6 10 30,5 M8 36,4 94 swivel clamped X max. 40,5 48,6 Y min. 34,5 41,4 Y max. 43,5 53,6 Clamping Hand force force N 700 1100 FH N 100* 150*

K0914 Thrust clamps 4 5 ° Ø D G clamping cylinder Ø C Ø B unclamping position Material, version: Cam tool steel, hardened and black oxidised. Shaft carbon steel, hardened and black oxidised. Grip carbon steel, black oxidised. Ball knob black Duroplast PF 31. Sample order: K0914.252501 Note: * Admissible hand force for the handle. Accessories: Standard handles K0915. Screw-in handles with torque limit K0916. downthrust clamping K J thrust clamp vertical clamping e g n a r g n p m a F c l i A H N E Ø M thrust clamp ﬁnal point L (stro k e) horizontal clamping thrust clamp attachment When mounting an attachment on the clamping cylinder, hold the shaft using a spanner to prevent turning. KIPP Thrust clamps Order No. Version K0914.252500 without grip K0914.252501 with grip K0914.323200 without grip K0914.323201 with grip A A min. max. 25 25 32 32 26,7 26,7 34,5 34,5 B 25 25 32 32 C 23 23 30 30 D 16 16 20 20 E 10 10 13 13 F G H 1,7 M4x6 M4x6 J - 1,7 M4x6 M4x6 20 K 15 15 L 123° 123° 2,5 M6x9 M6x9 - 19,5 135° 2,5 M6x9 M6x9 25 19,5 135° M 12 12 15 15 N - 69,5 - 103 Clamping Hand force force N 3000 3000 4000 4000 FH N 150* 150* 200* 200* 95

K1232 Clamping bolts SW 18 0 3 e g n a r g n p m a c l i M16 Ø 22 SW 36 6 s j H M10 Ø 39 KIPP Clamping bolts Order No. K1232.100 K1232.050 KIPP Clamping screws Order No. K1232.6587 K1232.4067 96 Material: Clamping bolt, steel. Clamping screw, carbon steel. Clamping ring brass. Version: Clamping bolt hardened and black oxidised. Clamping screw black oxidised. Clamping ring bright. Sample order: K1232.100 Note: The clamping bolts can be ﬁ xed to the machine table directly with T-slot nuts. Clamping parallel to the table is guaranteed by low tolerance classes (js6) for the height. The clamping range is 8 – 40 mm. Clamping screws for the ranges 40 – 67 and 65 – 87 mm are also available. The intermediate plate prevents damage to the machine table, as well as shifting during tightening. The brass clamping ring prevents impressions on the workpiece. H 100 50 Clamp range 8 - 40 8 - 40 Clamp range 65 - 87 40 - 67

K1228 Floating clamp 18 AF M12 tightening torque min. 15 Nm = load 2 kN max. 30 Nm = load 8 kN 3x2.5 mm for adjusting height and swivel range cap screw M8, ISO 4762 l e v a r t g n p m a c l i 2 1 - 0 2 3 . x a m 1 2 8 , 6 2 2 1 1 - 2 0 1 h t a p l e v a r t SW 46 screw M12x30 DIN 913 (exchangeable) T-slot nut M12x14 DIN 508 46 exchangeable clamping jaw 7 5 5 1 8 2 1 1 0° Material: Base body and jaws steel. Housing aluminium. Version: Body nitrided, black oxidised and ground. Jaws nitrided and black oxidised. Housing red anodized. Sample order: K1228.100812 Note: The ﬂ oating clamp is used to clamp and support overhanging clamping points on components. It prevents vibrations and deﬂ ection during machining. Method of operation: 1. Push the ﬂ oating clamp down. 2. Pivot the jaws to the stop. The ﬂ oating clamp contacts the bottom of the workpiece with a light spring force. 3. Tighten the ﬂ oating clamp with the SW 18 hexagon nut (note the min. and max. torque). During clamping the workpiece is clamped and simultaneously supported. 4. Reverse the process to release. Assembly: Fasten the ﬂ oating clamp to the ﬁ xture with the M12 screw. Adjust the height stop and swivel range using the red sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For speciﬁ c clamping applications the standard jaws can be altered or replaced. KIPP Floating clamp Order No. Travel path max. clamping stroke K1228.100812 10 12 Load capacity N 8000 Clamping force N 8000 98

K1227 Floating clamp with separate workpiece clamp and interlock SW 10 - locking tightening torque max. 10 Nm SW 18 - workholding tightening torque max. 15 Nm 3x2.5 mm for adjusting height and swivel range cap screw M8, ISO 4762 l e v a r t g n p m a c l i 2 1 - 0 5 . 5 4 . x a m 1 2 8 , 6 2 2 1 1 - 2 0 1 h t a p l e v a r t grub screw M12x30 DIN 913 (exchangeable) SW 46 T-slot nut M12x14 DIN 508 46 exchangeable clamping jaw 7 5 5 1 8 2 1 1 0° Material: Base body and jaws steel. Housing aluminium. Version: Body nitrided, black oxidised and ground. Jaws nitrided and black oxidised. Housing blue anodized. Sample order: K1227.100812 Note: This ﬂ oating clamp is used to clamp and support overhanging clamping points on thin components. It prevents vibrations and deﬂ ection during machining. Method of operation: 1. Push the ﬂ oating clamp down. 2. Pivot the jaws. The lower jaw contacts the workpiece with a light spring force. 3. Tighten the SW 18 hexagon nut. The jaws clamp the workpiece, the clamp is still ﬂ oating. 4. Tighten the SW 10 hexagon nut. The clamping process is completed. 5. Reverse the process to release. Assembly: Fasten the ﬂ oating clamp to the ﬁ xture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For speciﬁ c clamping applications the standard jaws can be altered or replaced. KIPP Floating clamp with separate workpiece clamp and interlock Order No. Travel path max. clamping stroke K1227.100812 10 12 Load capacity N 8000 Clamping force N 8000 99

100

K0910 Pull clamps 5° 4 Ø M F7 (hole to receive the clamping pin or clamping screw) 0,8 Ø0,02 A i * s s e n k c h t e c e p k r o w i e g n a r g n p m a c K i l , 1 0 0 ± A P 0,8 A G 3 holes for screwing in the handle (the angle between each hole is 30°) 3 possible handle positions D Ø B Ø C F Ø N G6 locating pin hole start point end point Material: Housing and cam tool steel. Grip carbon steel. Ball knob Duroplast PF 31. Version: Housing and cam hardened and black oxidised. Grip black oxidised. Ball knob black. Sample order: K0910.324001 Note: * Max. workpiece thickness see clamping pin K0910 (dimension C). ** Admissible hand force for the handle. Accessories: Standard handles K0915. Screw-in handles with adjustable torque K0916. Ø L E H / 2 J H recommended clamping position KIPP Pull clamps Order No. Version A B C D E F G H K0910.324000 without grip 32 40 13,5 18 24,5 M4x8 M5 90° J - K 1,5 L - K0910.324001 with grip 32 40 13,5 18 24,5 M4x8 M5 90° 76,5 1,5 20 K0910.405000 without grip 40 K0910.405001 with grip 40 50 50 18 18 25 30,7 M6x9 M6 110° - 2 - 25 30,7 M6x9 M6 110° 111,5 2 25 M 5 5 8 8 N 8 8 12 12 P 10 10 13 13 Clamping Recommended Hand force force workpiece thickness N 900 900 2500 2500 tolerance ±0,3* ±0,3* ±0,5* ±0,5* FH N 150** 150** 200** 200** Holding force N 2000 2000 5500 5500 100

101

K0910 Clamping pins i ) s s e n k c h t e c e p k r o w i ( * C A 5 5 8 8 l ) e g n a r e b a t s u d a ( j 1 ± KIPP Clamping pins Order No. K0910.005050 K0910.006050 K0910.008080 K0910.010080 K0910 ØD J H 1 E T * C 8 F ØG ØA f7 ØB f7 B 5 6 8 10 C 50 50 80 80 D 10 10 16 16 E 10 10 15 15 Material: Carbon steel. Version: Pins tempered and ground. Knurled knob tempered, black oxidised. Sample order: K0910.005050 Note: * The clamping pin can be altered to suit the workpiece thickness. Accessories: to: K0910.3240... (K0910.005050 and K0910.006050), K0910.4050... (K0910.008080 and K0910.010080) G 3 3 4,3 4,3 F 17 17 22 22 H M3 M3 M5 M5 J M3x4 M3x4 M5x5 M5x5 T 3 3 4,5 4,5 Clamping screws C E 8 F D Ø B G Ø A Ø J H C 6 7 9 11 KIPP Clamping screws Order No. K0910.105060 K0910.106070 K0910.108090 K0910.110110 A 5 5 8 8 B M5 M6 M8 M10 Material: Carbon steel. Version: Tempered and black oxidised. Sample order: K0910.105060 Accessories: To: K0910.3240 for K0910.105060 and K0910.106070, K0910.4050 for K0910.108090 and K0910.110110 D 8 8 12 12 E 17 17 22 22 F 1,2 1,2 1,5 1,5 G 3 3 4,3 4,3 H 4 4 6 6 J 2,5 2,5 4 4 101

102

K0911 Pull clamps (high force) i * s s e n k c h t e c e p k r o w i e g n a r g n p m a c H i l K Ø C F 0,8 1 0 , 0 ± A 0,8 f o e t o n e k a t h t g n e l n p i Ø D F7 Ø B start point J 3 holes for screwing in the handle (angle between each hole is 35°) 3 possible handle positions clamping start position Material: Housing, clamping ring and handles, carbon steel. Grip Duroplast PF 31. Version: Housing and clamping ring hardened and black oxidised. Handles black oxidised. Grip black. Sample order: K0911.506501 E Note: When clamping with a high force clamping pin the recommended workpiece tolerances must be maintained. The grip lever must lay between the recommended clamping position and end point for safe clamping. * Max. workpiece thickness, see clamping pin K0911 (dimension C). ** Admissible hand force for the handle. 1 0 ° 30° travel 8 0 ° 1 6 0 ° G Ø recommended clamping position L end point KIPP Pull clamps (high force) Order No. K0911.506501 K0911.638001 102 A 50 63 B 65 80 C 28 34 D 12 16 E F G 36 M8x14 26 H 2 45 M10x18 28 2,5 J 10 12 K 40 50 Recommended Hand force force workpiece thickness L Clamping N 160 6000 180 8000 tolerance ±0,5* ±0,8* FH N 600** 600** Holding force N 8000 14000

103

K0911 Clamping pins (high force) ØD J H l ) e g n a r e b a t s u d a ( j 1 ± i ) s s e n k c h t e c e p k r o w i ( * C KIPP Clamping pins (high force) ØG ØA f7 ØB f7 0 , 8 0 , 8 1 E T Material: Carbon steel. * C Version: Pins tempered and ground. Knurled knob tempered, black oxidised. K F Sample order: K0911.412100 Note: * The clamping pin can be altered to suit the workpiece thickness. A 12 12 16 16 B 12 16 16 20 C 100 100 120 120 D 18 24 24 30 E 23 23 29 29 F 38 38 48 48 G 6,5 6,5 9,5 9,5 H M8 M8 M10 M10 J M8x8 M8x8 M10x10 M10x10 K 21,5 21,5 28 28 T 7 7 9 9 Suitable for K0911.506501 K0911.506501 K0911.638001 K0911.638001 Order No. K0911.412100 K0911.416100 K0911.516120 K0911.520120 K0911 Clamping screws (high force) C E G F D Ø B H Ø A Ø K J D 20 20 25 25 KIPP Clamping screws (high force) Order No. K0911.1412013 K0911.1416017 K0911.1516017 K0911.1520021 A 12 12 16 16 B M12 M16 M16 M20 C 13 17 17 21 Material: Carbon steel. Version: Tempered and black oxidised. Sample order: K0911.1412013 E 38 38 48 48 F 2 2 2,5 2,5 G 21,5 21,5 28 28 H 6,5 6,5 9,5 9,5 J 10 10 13 13 K 4 4 5 5 Suitable for K0911.506501 K0911.506501 K0911.638001 K0911.638001 103

104

How to locate workpiece Workpiece positioning Clamping by means of pull clamp and clamping pin Simultaneous clamping and positioning of a workpiece ±0,02 centre distance of the reamed holes (workpiece) reamed hole for clamping pin (F7) locating pin ±0,02 locating pin centre distance of the reamed holes (ﬁxture plate) Holding forces for workpiece processing workpiece clamping pin max. holding force ﬁxture plate Make sure that no force exceeding the values in the table is affecting the bottom of the workpiece. pull clamp performance curve ) N ( e c r o f g n p m a c l i 8000 7000 6000 5000 4000 3000 2000 1000 0 K0911.638001 K0911.506501 200 300 100 hand force (N) 400 500 600 104

105

Pull clamps Pull clamps + Swing clamps (high force) 105

106

K0891 Robust side clamps S1 1 F F1 2 H H 1 H 1 B S B L1 L Material: Body malleable iron. Jaws mild steel. Version: Black oxidised. Jaws case-hardened. Sample order: K0891.26 Note: The jaws are reversible, smooth side for machined parts, serrated side for rough surfaces. We recommend using two bolts to mount the clamp to the machine table! Drawing reference: 1) tightening torque max. 50 Nm KIPP Robust side clamps Order No. K0891.19 K0891.26 K0891.38 106 suitable for slot width L L1 12, 14, 16, 18 177,5 112,5 20, 22, 24, 28, 30 226,5 136,5 32, 36, 42 262,5 157,5 B 65 75 90 B1 19 26 38 H 85 100 120 H1 37 45 55 H2 99 118 145 H3 40 40 40 S 12 12 12 S1 8 11 15 F kN 18,8 23,05 29,4 F1 kN 2,26 2,77 3,33

107

K0830 Side clamps K0830.212 K0830.112 A-A M10x15 M10x20 F F1 13 6 9 6 8 6 8 0 1 0 3 Ø13 6 Ø12,1 Ø18 n7 50 13,5 30 Material: Body steel 1.1191. Version: Black oxidised. Centring bush hardened. Sample order: K0830.112 (self-aligning pad not supplied) 7 9 Note: The unit comprises of an adjustable side clamp and a side stop and are used to clamp workpieces with a simultaneous positive down force. The side clamp has two DIN 913 grub screws which can be set to prevent backward slippage during clamping. , 2 0 0 ± 0 5 Ø 1 9 79 8 1 0 1 M 0 2 0 5 A SW 10 20 95 130 0 8 8 2 A F kN 25 22,5 F1 kN 5 4,5 107 5 , 3 0 1 5 2 9 7 5 3 KIPP Side clamps Order No. K0830.112 K0830.212

108

K0831 Side clamps A B 155 90 20 50 Material: Body ductile iron (SG iron). Jaw hardened carbon steel. F 4 F1 5 2 0 5 9 0 7 6 Version: Painted black. Jaw bright. Sample order: K0831.03 Note: The workpiece is clamped between side clamps and the side stops, simultaneously producing a positive down force. Side clamps and stops are secured with DIN 912 cylinder screws. A secure clamping is ensured when side clamps and side stops are used together. Drawing reference: 1) spherical washer set for M12 and M16 2) workpiece 4 1 0 5 0 9 55 80 F F1 135 10 50 5 0 7 6 2 3 1 8 1 0 5 5 9 81 30 KIPP Side clamps Order No. K0831.01 K0831.03 108 Form A B F kN 29 58 F1 kN 1,3 2,4 2 Tightening torque Nm 38 150

109

K0832 Side stops A B 180 60 5 2 5 7 3 1 0 5 0 9 80 80 141 60 Material: Body ductile iron (SG iron). Jaw hardened carbon steel. Version: Painted black. Jaw bright. Sample order: K0832.01 Note: The workpiece is clamped between side clamps and the side stops, simultaneously producing a positive down force. Side clamps and stops are secured with DIN 912 cylinder screws. A secure clamping is ensured when side clamps and side stops are used together. Drawing reference: 1) spherical washer set for M12 and M16 2) workpiece 5 7 2 3 1 0 5 5 9 8 1 86 30 2 KIPP Side stops Order No. K0832.01 K0832.02 Form A B 109

110

K0890 Side clamps W D2 K1 Y X Z Z1 H 2 H 1 D D L1 E 1 H E1 2 BL K L A Material: Body steel. Jaw mild steel. Centring bush with collar carbon steel. Version: Black oxidised. Jaws case-hardened. Sample order: K0890.006 Note: These ﬂ at design side clamps are ideal for machining low proﬁ le workpieces. The hardened jaws also provide positive down force. KIPP Side clamps Order No. K0890.006 K0890.010 K0890.016 110 A 80 120 186 B 24 39 60 D 12,2 18,2 26,2 D1 D2 16 24 35 E E1 6,5 2,5 0,6 10,5 17 4 7 1 1,5 H 21 34 51 H1 H2 K 25,5 9 25,5 K1 2 L L1 L2 44,5 2,5 13,5 40 59 20 22 40,5 2,5 65,5 4 21,5 60,5 4 105 6,5 35,5 W 7 10 16 X 4,5 6 9 Y 11 15 24 Z 5 8 Z1 3 4,5 14 9 Clamping force kN 3 16 31

111

K0033 Side clamps X Z 1 Y 2 H 1 E 1 H K1 H D3 K L E 4 D 1 D D B 2 D D5 A Material: Body steel. Jaw mild steel. Centring bush carbon steel Version: Black oxidised. Jaws case-hardened. Sample order: K0033.006 Note: The jaws are reversible - smooth side for machined surfaces, serrated side for rough surfaces. A positive down force is also exerted during clamping. Drawing reference: 1) reversible jaw K0869 K0899 K K1 E 6,5 2,5 10,5 17 4 7 16 24 35 E1 11 18 27 H 35 56 85 H1 H2 24 38 60 12,4 25,5 2,5 20 30 40,5 60,5 4 7 L 27 39 61 X Y Z 12 4,5 M3 20,5 8 32 13 M5 M8 Clamping force kN 10 40 100 111 KIPP Side clamps Order No. K0033.006 K0033.010 K0033.016 A 73 110 170 B 25 39 58 D1 D2 D3 D4 D5 D 12,2 M6 7 M6 18,2 M10 11 M10 26,2 M16 17 M10

112

K0928 Side clamps view X 2 (clamping range) 1 1 H X U R A C T P D B unclamped position L holes for cap screws E F G K J H S grub screw with hexagon socket recommended clamping position 1 8 0 ° travel 9 0 ° N M end point Material: Body and grip carbon steel. Jaw and cam tool steel. Ball knob Duroplast PF 31. Version: Body, jaw and cam hardened and black oxidised. Grip black oxidised. Ball knob black. Sample order: K0928.0501 Note: * Permitted hand force for grip. Accessories: Standard handles K0915. Screw-in handles with adjustable torque K0916. cap screw grub screw The slots enable ﬁnal adjustment of the clamping range. Tightening the grub screws in the base front prevents the clamp sliding back during clamping. KIPP Side clamps Order No. Version K0928.0500 without grip K0928.0501 with handle K0928.0800 without grip K0928.0801 with handle A 30 30 40 40 B 42 42 62 62 C 7 7 10 10 D 12 12 16 16 E 45 45 65 65 F 35 35 50 50 G 12 12 16 16 H J K L 19 12,5 4 M5 19 12,5 4 M5 M 69 69 28 18,5 5 M8 104 28 18,5 5 M8 104 N 20 20 25 25 P 31 31 41 41 R S T 26 M4x10 M5 26 M4x10 M5 U 7 7 38 M4x15 M6 9,5 38 M4x15 M6 9,5 Clamping Hand force force N 3000 3000 4000 4000 FH N 150* 150* 200* 200* 112

113

K0929 Side clamps K J Material: Housing and arm carbon steel. Jaw tool steel. Version: Housing, black oxidised. Arm and jaw tempered and black oxidised. Sample order: K0929.080400 H C washer 2x A E B F D N M G R grub screw P ball-end thrust screw L cap screw grub screw KIPP Side clamps Order No. K0929.080400 K0929.100500 K0929.120600 K0929.160800 A 40 50 60 80 B 50 65 70 90 C 40 50 60 80 D 20 25 30 40 E 6 8 10 15 F 35 45 50 65 G 10 12 15 20 H 5,3 7,1 8 10,2 J 12 16 20 25 K 21 27 31 39 L 8,5 11 13 17 M 32 40 48 64 N P R 62,5 M8x35 M4x10 74 M10x40 M4x12 91 M12x50 M5x15 115 M16x60 M6x20 Clamping Tightening force N 15000 27000 38000 46000 torque Nm 25 50 90 130 113

114

K0930 Side clamps J holes for DIN 912 cap screws F G G Material: Body and arm carbon steel. Jaw tool steel. Version: Body black oxidised. Arm and jaw tempered and black oxidised. Sample order: K0930.080400 K C A 1,5 1,5 (swivel) H N grub screw E B D L M ball-end thrust screw KIPP Side clamps Order No. K0930.080400 K0930.100500 K0930.120600 114 A 45 55 65 B 45 55 65 C 40 50 60 D 30 40 45 E 25 30 35 F 5,3 7,1 8 G 12 16 20 H 31 39 47 J M8 M10 M12 K 32 40 48 L M 62,5 M8x35 74 M10x40 91 M12x50 N M4x4 M4x4 M5x5 Clamping Tightening force N 15000 27000 38000 torque Nm 25 50 90

115

K0931 Side clamps with rest pad H K C J G N T L M R A D E P B Material: Housing and arm carbon steel. Jaw tool steel. Version: Housing tempered and black oxidised. Arm black oxidised. Jaw tempered and black oxidised. Sample order: K0931.02508 Drawing reference: T) grub screw S) ball pressure screw F S clamping arm KIPP Side clamps with rest pad Order No. K0931.02508 K0931.03210 K0931.04012 A 62 78 93 K0931.04816 124 B 22 25 32 38 C 40 50 60 80 D 14 18 21 28 E 20 25 30 40 F 3 4 5 6 G 14 18 21 27 H 3 J 25-32 3,7 32-40 4,5 40-48 6 48-63 K 12 16 20 25 L M 14 8,5 17,5 20 26 11 13 17 N 5 7 8 10 21 28 Clamping Tightening force N 6000 torque Nm 15 30 65 ﬁxture base cap screw grub screw P R S T 14 75,5 M8x20 M4x8 17,5 95 M10x25 M5x10 10000 113 M12x30 M6x12 17000 151 M16x40 M8x16 25000 130 115

116

K0932 Toe clamps A A-A F C F J L E ØH h7 K G A D M A A B B A-A F F C J Ø H h7 G A D L E K M A A B Material: Carbon steel. Version: Tempered and black oxidised. Sample order: K0932.0806 mounting instructions: locating pin locating pin ØH +0,1 +0,05 1 + J K G KIPP Toe clamps Order No. Form K0932.0806 K0932.1008 K0932.1209 K0932.1610 K0932.0825 K0932.1032 K0932.1238 K0932.1645 A A A A B B B B A 35 43 54 65 32 40 50 60 B 25 30 35 40 25 30 35 40 C 6 8 9 10 25 32 38 45 D 24,5 29 37 45 21,5 26 33 40 E 15 19 23 25 15 19 23 25 F 3 4 5 6 3 4 5 6 G 10 12 16 20 10 12 16 20 H 6 6 8 10 6 6 8 10 J 7 7 10 10 7 7 10 10 K M8 M10 M12 M16 M8 M10 M12 M16 L 1,6 2 2,3 3,2 1,6 2 2,3 3,2 M 10 11 12 14 10 11 12 14 Clamping force N 7000 8500 20000 40000 7000 8500 20000 40000 Tightening torque Nm 25 50 90 200 25 50 90 200 116

117

K0933 Toe clamps G A G C H K F L hole for DIN 912 cap screw M BE D A G B G C H K F L hole for DIN 912 cap screw M E B D A KIPP Toe clamps Material, version: Body carbon steel, tempered and black oxidised. Jaw carbon steel, black oxidised, corners tempered. Sample order: K0933.0808 J J Order No. Form K0933.0808 K0933.1210 K0933.1614 K0933.0820 K0933.1229 K0933.1638 A A A B B B A 39,5 60 77 39,5 60 77 B 65 85 100 65 85 100 C 7,5 10 14 19,5 29 38 D 25 40 50 25 40 50 E 45 60 70 45 60 70 F 16 22 30 16 22 30 G 7 12 14 7 12 14 H 1,5 2 2 1,5 2 2 J 7 9 13 7 9 13 K 4 6 8 4 6 8 L M8 M12 M16 M8 M12 M16 M 25 35 40 25 35 40 Clamping force N 4000 9000 17000 4000 9000 17000 Tightening torque Nm 8 26 60 8 26 60 117

118

K0853 Toe clamps stepped J J H K C G F B E D Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered, black oxidised. Sample order: K0853.92008016 Note: The adjustable toe clamp is used together with the rack plate CL. C 16 22 30 D 14 20 26 E 8,5 13 17 F 10 13,5 17,5 G 16,5 26,5 30 H 7,5 10 14 J 7 12 14 K 7 9 F1 kN 3,6 7,4 13 11,7 M1 Nm 6,5 19 32 A B 25 35 40 KIPP Toe clamps, stepped Order No. K0853.92008016 K0853.92012022 K0853.92016030 A 72 105 137 K0853 Toe clamps stepped J J H A B 25 35 40 KIPP Toe clamps, stepped Order No. K0853.92108016 K0853.92112022 K0853.92116030 A 72 105 137 118 K C G F B DE Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered. The jaw surface is ground. Sample order: K0853.92108016 Note: These toe clamps are used together with the rack plate CL. C 16 22 30 D 14 20 26 E 8,5 13 17 F 10 13,5 17,5 G 16,5 26,5 30 H 7,5 10 14 J 7 12 14 K 7 9 F1 kN 3,6 7,4 13 11,7 M1 Nm 6,5 19 32

119

K0853 Toe stops stepped H B A KIPP Toe stops, stepped Order No. K0853.96008016 K0853.96012022 A 60 90 K0853.96016030 115 K0853 Toe stops stepped K C G F Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered and black oxidised. E D Sample order: K0853.96008016 Note: The adjustable stop is used together with the rack plate CL. B 25 35 40 C 16 22 30 D 14 20 26 E 8,5 13 17 F 10 13,5 17,5 G 16,5 26,5 30 H 7,5 10 14 K 7 10 13 H B K C G F E D Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered and black oxidised. The jaw surface is ground. Sample order: K0853.96108016 Note: The adjustable stop is used together with the rack plate CL. A KIPP Toe stops, stepped Order No. K0853.96108016 K0853.96112022 A 60 90 K0853.96116030 115 B 25 35 40 C 16 22 30 D 14 20 26 E 8,5 13 17 F 10 13,5 17,5 G 16,5 26,5 30 H 7,5 10 14 K 7 10 13 119

120

K0853 Toe clamps J J H B A B 25 35 40 KIPP Toe clamps Order No. K0853.93008016 K0853.93012022 K0853.93016030 K0853 A 72 105 137 Toe clamps J J H C K G F B DE G F C K DE Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered and black oxidised. Sample order: K0853.93008016 Note: The adjustable toe clamp is used together with the rack plate CL. C 16 22 30 D 14 20 26 E 8,5 13 17 F 10 13,5 17,5 G 16,5 26,5 30 H 19,5 29 39 J 7 12 14 K 7 9 F1 kN 3,6 7,4 13 11,7 M1 Nm 6,5 19 32 Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered and black oxidised. The jaw surface is ground. Sample order: K0853.93108016 Note: The adjustable toe clamp is used together with the rack plate CL. A B 25 35 40 KIPP Toe clamps Order No. K0853.93108016 K0853.93112022 K0853.93116030 120 A 72 105 137 C 16 22 30 D 14 20 26 E 8,5 13 17 F 10 13,5 17,5 G 16,5 26,5 30 H 19,5 29 39 J 7 12 14 K 7 9 F1 kN 3,6 7,4 13 11,7 M1 Nm 6,5 19 32

121

K0853 Toe stops H B G F C K E D A A 50 75 95 KIPP Toe stops Order No. K0853.97008016 K0853.97012022 K0853.97016030 K0853 Toe stops Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered and black oxidised. Sample order: K0853.97008016 Note: The adjustable stop is used together with the rack plate CL. B 25 35 40 C 16 22 30 D 14 20 26 E 8,5 13 17 F 16,5 20 30 G 10 13,5 17,5 H 19,5 29 39 K 7 10 13 H C K G F B DE Material, version: Body carbon steel, black oxidised. Jaw carbon steel, tempered and black oxidised. The jaw surface is ground. Sample order: K0853.97108016 Note: The adjustable stop is used together with the rack plate CL. KIPP Toe stops Order No. K0853.97108016 K0853.97112022 K0853.97116030 A A 50 75 95 B 25 35 40 C 16 22 30 D 14 20 26 E 8,5 13 17 F 10 13,5 17,5 G 16,5 26,5 30 H 19,5 29 39 K 7 10 13 121

122

K0853 Rack plates CL C B KIPP Rack plates CL Order No. K0853.94008116 K0853.94008120 K0853.94008125 K0853.94008132 K0853.94008140 K0853.94012020 K0853.94012025 K0853.94012032 K0853.94012040 K0853.94012050 K0853.94016025 K0853.94016032 K0853.94016040 K0853.94016050 K0853.94016063 122 F D A E A 50 50 50 50 50 85 85 85 85 85 90 90 90 90 90 B 25 25 25 25 25 35 35 35 35 35 40 40 40 40 40 J G C 16 20 25 32 40 20 25 32 40 50 25 32 40 50 63 Material: Carbon steel. Version: Black oxidised. Sample order: K0853.94008116 Note: Rack plates CL are used to position stepped and standard toe clamps. The holes (G) for DIN 912 socket head screws is used to fasten the rack plate CL to suitable base elements. The tapped hole (F) is used to secure the toe clamps. D 25 25 25 25 25 50 50 50 50 50 50 50 50 50 50 E 12,5 12,5 12,5 12,5 12,5 20 20 20 20 20 25 25 25 25 25 F M8 M8 M8 M8 M8 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 G hole for DIN 912 cap screw M8 M8 M8 M8 M8 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 J 7 9 13 20 28 5 12 12 12 12 6 13 15 15 15

123

K1168 Flat clamps Material: Carbon steel. Version: Hardened (33–39 HRC) and black oxidised. Sample order: K1168.204 Note: Particularly low workpieces can be clamped using these ﬂ at clamps. Clamping element with pull-down eff ect. Clamping element and ﬁ xed block in one compact unit. Drawing reference: Dimension L1 refers to clamped state. L A C 1 H C 1 H 2 H D1 L2 L1 B C L C 1 H 2 H D1 L2 L1 B 1 B B 1 B D for socket head screw D for socket head screw installation instructions D2 +0,3 0 T D L2 1 2 (Jaws exert positive down force) 1. Horizontal thrust against workpiece 2. Vertical thrust prevents the workpiece lifting KIPP Flat clamps Order No. Form K1168.104 K1168.105 K1168.204 K1168.205 A A B B B 15 19 15 19 B1 5 7 5 7 C 2 2,5 2 2,5 D M4 M5 M4 M5 D1 D2 4 5 4 5 4 5 4 5 H 7 9 7 9 H1 H2 3 4 - - 5 6 5 6 L 23 28 20 25 L1 12 14 9 11 L2 8 10 8 10 T 6 7 6 7 Clamping Tightening force kN 2 3 2,5 3,5 torque Nm 2,7 5,4 2,7 5,4 123

124

K1230 T-slot clamps L F C B A 1 H 1 H X H F1 2 H Material: Steel. Version: Hardened, black oxidised. Note: These T-slot clamps are especially useful for clamping low proﬁ le workpieces. The wedge operated jaws also provide positive down force. Dimensions “H1” and “X” depend on the max. T-slot depth acc. to DIN 650. To achieve the minimal clamping height by the minimal slot depth, the jaw can be ground down by the dimension “X”. KIPP T-slot clamps Order No. K1230.12 K1230.14 K1230.16 K1230.18 K1230.22 124 A 12 14 16 18 22 C 1,8 1,8 2,5 2,5 3 L max. 52 55 68 71 89 B 18 22 25 28 35 H 31 34 41 43 53 H1 min. 3,5 2,5 4 2 5 H1 max. 8,5 7,5 11 9 14 X 5 5 6 6 9 H2 7 8 9 10 14 F (N) 5000 5500 8000 9000 16000 F1 (N) 600 700 900 1000 1900

125

K1229 Low-proﬁ le clamps 1 C F1 ”A” C ”A” H Material: Steel. Version: Hardened, black oxidised. F D L1 L2 L 1B B Note: These handy low-proﬁ le clamp jaws are ideal for machining most workpiece sizes. The hardened wedge operated jaws also provide positive down force. KIPP Low-proﬁ le clamps Order No. K1229.12 K1229.14 K1229.16 K1229.161 K1229.18 K1229.20 K1229.22 Slot width 12 14 16 16 18 20 22 L 80 80 80 100 100 100 140 L1 39 39 39 46 46 46 65 L2 26 26 26 34 34 34 50 B 40 40 40 50 50 50 78 B1 47 47 47 59 60 60 95 H 20 20 20 25 25 25 30 C 3 3 3 4 4 4 5 C1 2,5 2,5 3 2,5 3 3 4 D M10 M12 M12 M14 M16 M16 M20 F kN 16 22 22 32 36 36 36 F1 kN 0,6 0,9 0,9 1,2 1,4 1,4 1,4 Tightening torque max. Nm 15 18 18 25 35 35 45 125

126

K0039 Wedge clamps jaw face smooth or serrated A A 1 2 E C B F Material: Wedge and jaw segments carbon steel. Version: Wedge and jaw segments hardened, black. Sample order: K0039.2208 Note: The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the ﬁ xtures ﬁ xed stops. The wedge has a slightly elongated hole allowing for movement to compensate for tolerances. Spread width: M8 = ±0.5 mm M10 = ±1.0 mm M12 = ±1.0 mm M16 = ±1.5 mm Drawing reference: 1) Jaw face smooth 2) Jaw face serrated wedge clamp workpiece workpiece ﬁxed stop ﬁxed stop KIPP Wedge clamps, narrow version Order No. smooth version K0039.1108 K0039.1110 K0039.1112 K0039.1116 Order No. serrated K0039.2108 K0039.2110 K0039.2112 K0039.2116 KIPP Wedge clamps, wide version Order No. smooth version K0039.1208 K0039.1210 K0039.1212 K0039.1216 126 Order No. serrated K0039.2208 K0039.2210 K0039.2212 K0039.2216 A min. 30,5 32 44 55 A min. 30,5 32 44 55 A max. 33,5 37 49,5 62 A max. 33,5 37 49,5 62 B 24 28 30 40 B 30 38 48 48 C 15 19 22 29 C 15 19 22 29 E 2 3,5 3,5 4 E 2 3,5 3,5 4 F Socket head screw DIN 6912 M8x25 M10x25 M12x40 M16x60 F Socket head screw DIN 6912 M8x25 M10x25 M12x40 M16x60 Clamping force kN Tightening torque Nm 15 20 30 50 25 49 85 210 Clamping force kN Tightening torque Nm 15 20 30 50 25 49 85 210

127

K0649 Wedge clamps machinable A A F E C B 1 2 3 4 5 A max. 39,5 47 59,5 72 39,5 47 59,5 72 KIPP Wedge clamps machinable Order No. Version K0649.3108 K0649.3110 K0649.3112 K0649.3116 K0649.3208 K0649.3210 K0649.3212 K0649.3216 narrow narrow narrow narrow wide wide wide wide A min. 36,5 42 54 65 36,5 42 54 65 Material: Wedge and jaw segments carbon steel. Version: Wedge and jaw segments hardened, black. Sample order: K0649.3110 Note: These wedge clamps have extra long jaws. This extra material allows the jaws to machined to suit the form of the workpiece. The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the ﬁ xtures ﬁ xed stops. The wedge has a slightly elongated hole allowing for movement to compensate for tolerances. Spread width: M8 = ±0.5 mm M10 = ±1.0 mm M12 = ±1.0 mm M16 = ±1.5 mm Drawing reference: 1) wedge clamps 2) workpiece 3) ﬁ xed stop 4) base plate 5) hydraulic/pneumatic cylinder B 24 28 30 40 30 38 48 48 C 15 19 22 29 15 19 22 29 E 2 3,5 3,5 4 2 3,5 3,5 4 F Socket head screw DIN 6912 M8x25 M10x25 M12x40 M16x60 M8x25 M10x25 M12x40 M16x60 Clamping force kN Tightening torque Nm 11 15 23 38 11 15 23 38 19 37 65 160 19 37 65 160 127

128

K0040 Wedge clamps jaw faces serrated A A E C F G D B Material: Body and clamping segments tool steel. Version: Body hardened. Jaw segments hardened (49-51 HRC) black oxidised. Wedge faces ground. Sample order: K0040.1618 Note: The compact design makes these wedge clamps ideal for horizontal and vertical series clamping. The hardened and ground wedge faces can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the DIN 912 socket screw moves the wedge down and the jaws out pressing the workpieces against the ﬁ xtures ﬁ xed stops.The jaws of version K0040.08 and K0040.0810 are not serrated. The wedge has a slightly elongated hole allowing for movement.Spread width: K0040.08 = ±0.5 mm K0040.12 = ±1.0 mm K0040.16 = ±1.5 mm. wedge clamp workpiece workpiece ﬁxed stop ﬁxed stop KIPP Wedge clamps, jaw faces serrated Order No. K0040.08 K0040.0810 K0040.12 K0040.1214 K0040.16 K0040.1618 128 A min. A max. 27 27 42 42 57 57 31 31 49 49 66 66 B 29 29 41 41 56 56 C 15 15 22 22 29 29 D 21 21 30 30 42 42 E 2,5 2,5 4 4 5 5 F Socket head screw DIN 912 M8x25 M8x25 M12x40 M12x30 M16x60 M16x50 G for tapped hole for T-slot 10 for tapped hole for T-slot 14 for tapped hole for T-slot 18 Clamping Tightening force kN 15 15 30 30 50 50 torque Nm 25 25 85 85 210 210

129

K0041 Wedge clamps machinable A A E C F G D B 1 2 3 4 5 Material: Body tool steel. Jaw segments tool steel (30 HRC). Version: Body hardened. Jaw segments black oxidised. Wedge faces ground. Sample order: K0041.12 Note: These wedge clamps have a machining allowance per jaw of 3 mm for version K0041.08 and 5 mm for versions K0041.12 and K0041.16. This extra material allows the jaws to machined to suit the form of the workpiece. The jaws version K0041.08 and K0041.0810 are not serrated. Spread width: K0041.08 = ±0.5 mm K0041.12 = ±1.0 mm K0041.16 = ±1.5 mm On request: Pre-formed jaw segments or other hardness grades. Drawing reference: 1) wedge clamps 2) workpiece 3) ﬁ xed stop 4) base plate 5) hydraulic/pneumatic cylinder KIPP Wedge clamps machinable Order No. K0041.08 K0041.0810 K0041.12 K0041.1214 K0041.16 K0041.1618 A min. A max. 33 33 52 52 67 67 37 37 59 59 76 76 B 29 29 41 41 56 56 C 15 15 22 22 29 29 D 21 21 30 30 42 42 E 2,5 2,5 4 4 5 5 F Socket head screw DIN 912 M8x25 M8x25 M12x40 M12x30 M16x60 M16x50 G Clamping force kN Tightening torque Nm for tapped hole for T-slot 10 for tapped hole for T-slot 14 for tapped hole for T-slot 18 15 15 30 30 50 50 25 25 85 85 210 210 129

130

K0042 Wedge clamps double jaw faces serrated A A E C F G D B Material: Body and jaw segments tool steel. Version: Body hardened. Jaw segments hardened (49-51 HRC) and black oxidised. Wedge faces ground. Sample order: K0042.1214 Note: The compact design makes these double wedge clamps ideal for horizontal and vertical series clamping. The hardened and ground wedge faces can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the DIN 912 socket screw pulls the wedges together and the jaws out pressing the workpieces against the ﬁ xtures ﬁ xed stops. The double wedges create a positive down force. Spread width: K0042.12 = ±1.0 mm K0042.16 = ±1.5 mm wedge clamp workpiece workpiece ﬁxed stop ﬁxed stop KIPP Wedge clamps double wedge, jaw faces serrated Order No. K0042.12 K0042.1214 K0042.16 K0042.1618 130 A min. A max. 42 42 57 57 49 49 67 67 B 41 41 56 56 C 36 36 50 50 D 30 30 42 42 E 5 5 5 5 F Socket head screw DIN 912 M12x60 M12x50 M16x80 M16x70 G for tapped hole for T-slot 14 for tapped hole for T-slot 18 Clamping force kN 40 40 60 60 Tightening torque Nm 85 85 210 210

131

Example of wedge clamps in use Wedge clamp Double wedge clamps 131

132

K0037 Wedge clamps ≥ B1 F 1 H F B2 L D ≤ B1 Material: Channel aluminium proﬁ le. Wedge hardened steel. Version: Channel anodized. Wedge black oxidised. Sample order: K0037.08 H Note: Two workpieces can be held simultaneously with the wedge clamp. They are ideal for clamping round or rectangular pieces. The compact design allows space- saving series clamping. Drawing reference: In clamped position dimension B1 max. given in the table should be achieved. KIPP Wedge clamps Order No. K0037.04 K0037.06 K0037.08 K0037.12 K0037.16 132 D M4 M6 M8 M12 M16 L 15,9 23,8 31,7 47,6 63,5 B1 min. - max. 12,3 - 13,1 18,6 - 19,9 24,8 - 26,6 37,3 - 39,7 49,7 - 52,8 B2 10,4 16,1 20,8 30,8 41,2 H 12,7 19 25,4 38,1 50,8 H1 5,6 9,5 12,7 19 25,4 F kN 2,2 6,7 8,9 15,6 26,7 Tightening torque max. Nm 3,4 14,3 14,5 38,4 74,6

133

K0038 Wedge clamps machinable 1 B1 B3 F 1 H F B2 L D L1 Material: Channel aluminium proﬁ le. Wedge hardened steel. Version: Channel anodized. Wedge black oxidised. Sample order: K0038.08 H D1 Note: Two workpieces can be held simultaneously with the wedge clamp. The jaws have extra material allowing them to be machined to conform to the shape of the workpiece. The compact design allows space-saving series clamping. Drawing reference: 1) The locking plate is only used for machining the form, not for clamping the workpiece. KIPP Wedge clamps machinable Order No. K0038.04 K0038.06 K0038.08 K0038.12 K0038.16 D M4 M6 M8 M12 M16 D1 M2 M4 M4 M5 M6 L 15,7 23,9 31,8 47,5 63,5 L1 10,16 15,9 20,6 30,5 B1 min. - max. 28,6 - 29,1 38,1 - 39 50,8 - 52 76,2 - 78 41,28 101,6 - 103,9 B2 10,6 16,1 20,8 30,9 41,3 B3 4,6 6,6 9,9 15,7 20,3 H 12,7 19,1 25,4 38,1 50,8 H1 6,3 9,4 12,7 19 25,4 F kN 2,2 6,7 8,9 15,6 26,7 Tightening torque max. Nm 3,4 14,3 14,5 38,4 74,6 133

134

K1167 Wedge clamps A H L ≤ A ≥ A D B H L ≤ A ≥ A D 1 W S B 1 W S B 1 1 2 2 (Jaws exert positive down force) 1. Horizontal thrust against workpiece 2. Vertical thrust prevents the workpiece lifting Material: Carbon steel. Version: Jaw plate hardened (33–39 HRC) and black oxidised. Sample order: K1167.11205 Note: Due to the functioning principle, wedge clamps are suitable for clamping in series. The wedges generate higher clamping forces. The wedge clamps are available with cap screws or countersunk screws. Wedge clamps with pull-down eff ect. Drawing reference: Dimension L refers to ≤ A. Dimension H refers to ≥ A. 1) O-ring KIPP Wedge clamps Order No. Version Form K1167.11205 with countersunk screw A K1167.11506 with countersunk screw A A min. 12 15 A max. 14 17 K1167.11808 with countersunk screw A 18,5 21,5 K1167.21205 with socket head screw B K1167.21506 with socket head screw B 12 15 14 17 K1167.21808 with socket head screw B 18,5 21,5 B 12 14,8 18,4 12 14,8 18,4 D M5 M6 M8 M5 M6 M8 H 7,5 8,7 11,8 13,4 15,8 21,2 L 9,5 9,3 11,3 9,6 10,2 14,9 SW Clamping 3 4 5 4 5 6 force kN 2 3,5 5 3 4,5 9 Tightening torque Nm 4,3 7,3 18 5,4 9,1 22 134

135

K0036 Toe clamps compact L2 L1 L S1 Material: Steel. 2 H 3 H 1 H Version: Body tempered and black oxidised. Square washer case-hardened and brass-plated. H Sample order: K0036.10 D B -0,1 Note: This cam action compact toe clamp requires very little space to produce multi-ﬁ xture clamping. Workpieces can be clamped in series by using the back side of a clamp as a stop for the next row. Mount preferably in slots with B +0.05 mm. The height of the clamp can be adjusted by altering the slot depth. SW S SW1 Example of series clamping using compact toe clamps KIPP Toe clamps compact Order No. K0036.08 K0036.10 K0036.12 L L1 43,2 25,4 L2 19 B H 19 12,7 15,7 54 75 33,5 25,4 25,4 11,4 15,4 50,8 38 38,1 25,5 31,5 H1 H2 6,4 9,7 13 H3 max. S D 21,4 1,5 M8 24,5 1,8 M10 43 2,05 M12 S1 (travel) 1,6 2 2,5 SW SW1 Clamping 5 7 7 8 10 12 force kN 8,9 17,8 26,7 Tightening torque max. Nm 28 88 135 135

136

K0026 Cam screws with hexagon washer H L D SW ±0,1 SW1 S1 A KIPP Cam screws with hexagon washer Order No. K0026.04 K0026.06 A D H 3,8 M4 2,8 7,8 M6 4,8 K0026.08 10,2 M8 4,8 K0026.10 10,2 M10 6,4 K0026.12 12,7 M12 9,5 K0026.16 15 M16 12,7 L 10 12 15 20 25 30 SW SW1 8 16 20,6 20,6 25,4 3 4 5 7 8 30,2 12 S1 (travel) 0,8 1 1 1,6 2 2,5 Clamping force kN Tightening torque max. Nm 0,9 3,4 3,6 9,0 18,0 27,0 2,2 8,5 11,3 28,06 88 135 Application using ﬁ xture clamps Material: Cam screw carbon steel. Hex washer brass. Version: Cam screw tempered to 10.9 and black oxidised. Sample order: K0026.12 Note: Also called ﬁ xture clamps. The minimal height of this ﬁ xture clamp allows numerous clamping problems in ﬁ xture and equipment construction to be solved. The brass hex washer off ers a gentle yet extremely stable and safe clamping of workpieces. By using several ﬁ xture clamps entire pallets can be set-up. “A” = distance from workpiece to screw centre (cam screw). On request: Replacement cam screws. 136

137

K0027 Cam screws with hexagon washer, for T-slots SW H S1 1 H 2 H D N L KIPP Cam screws with hexagon washer, for T-slots H 4,8 4,8 4,8 6,4 9,5 9,5 9,6 14 15,5 22 22,5 28,5 12,7 32 12,7 38,2 H1 H2 L 23 23 28 30,5 30,5 34,5 39 44 SW 16 16 21 21 25 25 30 30 S1 (travel) 1 1 1 1,6 2 2 2,5 2,5 Clamping force kN 3,4 3,4 3,6 9 18 18 27 27 4,5 4,5 6,5 8,5 9 10 12 14 Order No. K0027.08 K0027.10 K0027.12 K0027.14 K0027.16 K0027.18 K0027.20 K0027.22 D M6 M6 M8 M10 M12 M12 M16 M16 N 8 10 12 14 16 18 20 22 K0025 Cam screws with knife edge washer Material: Carbon steel. Hex washer brass. Version: Tempered to 10.9 and black oxidised. Sample order: K0027.12 Note: Also called ﬁ xture clamps for T-slots. These ﬁ xture clamps can be used directly on machine tables or other tables with T-slots. The grub screw at the rear locks the T-nut in the slot. Thin shims are recommended to prevent marking the bottom of the T-slot. On request: Replacement cam screws. H L SW 1 S 1 D D A KIPP Cam screws with knife edge washer Material: Knife edge washer. Cam screw carbon steel. Version: Cam screw tempered to 10.9 and black oxidised. Knife edge washer hardened and anodized. Sample order: K0025.16 Note: Also called knife edge clamps. The hardened knife edge washer is suitable for clamping rough cut stock, castings, forgings etc. “A” = distance from workpiece to screw centre (cam screw). On request: Replacement cam screws. Order No. K0025.12 K0025.16 A 12,7 15 D M12 M16 D1 25,4 30,1 L 22,5 26,8 H 9,6 12,7 SW 8 12 S1 (travel) 2 2,5 Clamping force kN 18 27 Tightening torque max. Nm 88 135 137

138

K0022 Fixture clamps machinable S1 SW Material: Cam screw alloyed steel. Clamping disc steel. Version: Cam screw and clamping disc black oxidised. D 1 D ≥ 1 D Sample order: K0022.06 H L A KIPP Fixture clamps machinable Order No. K0022.06 K0022.10 K0022.12 K0022.16 A D D1 D1 min. 7,8 M6 24,9 12,1 10,2 M10 31,2 17,2 H 6,4 8,9 L 11,9 18 12,7 M12 37,6 22,4 11,4 22,9 SW 4 7 8 15 M16 43,9 26,1 14 28,6 12 S1 (travel) 1,01 1,52 2,03 2,54 Clamping force kN 3,3 8,9 17,8 26,7 K0023 Fixture clamps unequal hexagon A B H 1 H D S A KIPP Fixture clamps unequal hexagon Order No. Form A Order No. Form B smooth ﬁ nish notched ﬁ nish K0023.09 K0023.10 K0023.11 K0023.13 K0023.14 K0023.15 138 Distance A by face No. 1/12, 2/13, 3/14, 4/15, 5/16, 6/17 7/18, 8/19, 9/20, 10/21, 11/22, 12/23 13/24, 14/25, 15/26, 16/27, 17/28, 18/29 Note: These ﬁ xture clamps have a round washer that can be machined to suit the contour of the workpiece being clamped. This allows positive clamping for round, contoured or fragile workpieces. The ﬂ at edge is the same distance from the screw centre as our hexagonal ﬁ xture clamps K0026 allowing an interchange between the two. “A” = distance from workpiece to screw centre (cam screw). “D1 min.” = maximum depth of contour. On request: Replacement cam screws. Material: Cam screw steel tempered to 10.9. Hexagon washer mild steel. Version: Cam screw black oxidised. Hexagon washer hardened and black oxidised. Sample order: K0023.13 Note: Theses unequal hexagon ﬁ xture clamps can minimise the cost of clamping in ﬁ xtures. The clamping range can be altered up to 17 mm from the same tapped hole. Simply rotate the hexagon washer. The washers are available with smooth edges for machined faces or with serrated edges for rough faces. On request: Replacement cam screws. D M12 M12 M12 H 10 10 10 H1 22 22 22 S (cam travel) 1 1 1 Clamping force kN 18 18 18

139

K0028 Cam clamps with riser 6,35 5 M12 3 1 0 , 0 - 2 9 1 , 2 1 25,5 B 5 7 , 5 1 5 , 8 2 KIPP Cam clamps with riser 63,5 Order No. K0028.12 K0028.14 K0028.16 K0028.18 Notes B Slot width 12 14 16 18 Material: Steel. Version: Body tempered and black oxidised. Square washer case hardened and brass-plated. Sample order: K0028.16 Note: Also called riser clamps. These cam clamps with riser can be used directly on machine tables. A positive down force is exerted during clamping. On request: Replacement cam screws. Clamping force kN 12 12 12 12 139

140

K0357 Mandrel collets D ≥D* 1 1 H H D3 D4 D1 x 1 2 3 0° (=360°) K0357.1630175 4 x 9 0° (=360°) 2 H 3 H 2 W D S 2 W D S Material: Mandrel mild steel. Taper-head screw low-carbon steel Version: Mandrel black oxidised. Taper-head screw case-hardened. Sample order: K0357.081420 Note: The mandrel collet is ideal for ﬁ nish machining turned parts. The diameter D can be turned or milled to suit the workpiece ID. Low design - no interfering clamp straps. Tightened using a hex socket wrench or hydraulics. * D min. = smallest diameter to which „D“ may be turned or milled. Assembly: Expand the mandrel approx. 0.1 mm over the relaxed diameter. Turn or mill the mandrel to suit the internal diameter of the workpiece. The base ﬂ ange can be centred in a pocket or using dowel pins. Drawing reference: 1) taper-head screw KIPP Mandrel collets Order No. K0357.020407 K0357.040812 K0357.061214 K0357.081420 K0357.062027 D 7,4 12,4 14,2 20 27 K0357.102535 35,3 D min. D1 D2 4,1 20 h9 13,7 8 29,72 h9 21 12,2 31,5 h9 23,1 13,5 37,5 h9 29 18 23 50 h9 39,4 56 h9 45,5 K0357.123442 42 29,3 69,5 h8 55,9 K0357.123452 K0357.163077 K0357.1630103 K0357.1630175 51,5 77,7 103 175 29,3 75,5 h9 63,9 29,3 107,5 h9 92,5 29,3 132,9 h9 118 29,3 132,9 h9 118 140 D3 for screw ISO 10642 D4 Tapered- head bolt M2 M3 M3 M3 M4 M4 M5 M5 M6 M6 M6 M2 M4 M6 M8 M10 M12 M16 M16 M16 M16 M16 H 10,7 21,8 24,9 24,9 28,6 31,8 39,6 39,6 45,5 45,5 45,5 H1 H2 H3 SW Tapered- head bolt 7,6 6,1 4,1 1,5 16 19 19 22,2 25,4 31,8 31,8 37,6 37,6 37,6 15 15 15 17,5 20,6 27 27 32,3 32,3 32,3 8 12 14 17 21 22 22 20 20 20 3 5 6 8 10 14 14 14 14 14 Tightening torque max. Nm Clamping force max. kN 0,7 5 17 34 60 150 280 280 280 280 280 1,1 4,2 8,5 11,1 20 26,3 44,5 44,5 44,5 44,5 44,5

141

K0893 Centring clamps D D D1 D3 H H 1 L SW D D D1 D2 D3 H H L 2 L SW 1 W S Material: Body steel. Bushes carbon steel. Version: Black oxidised. L Sample order: K0893.0615 Note: These centring clamps allow workpieces to be centred on and clamped in a bore. The clamps have a wide expansion range. The series covers a bore range of Ø12 to Ø30 mm. To increase the centring accuracy the clamps with internal thread have a centring spigot (D2) for a locating hole. These are also suitable for M6 grid systems (see application example). KIPP Centring clamps Order No. K0893.0615 K0893.0619 K0893.0624 K0893.0630 K0893.061215 K0893.061219 K0893.081624 K0893.081630 Version internal thread internal thread internal thread internal thread external thread external thread external thread external thread D1 M6 M6 M6 M6 M6 M6 M8 M8 L1 - - - - 12 12 16 16 L2 4 4 4 4 - - - - D min. D max. 12 15 19 24 12 15 19 24 15 19 24 30 15 19 24 30 D2 12 12 12 12 - - - - D3 11,4 14 17,8 23 11,4 14 17,8 23 H min. 22 24,5 26 32 22 24,5 26 32 H max. 27,5 32 35 44,5 27,5 32 35 44,5 L min. 4,8 4,8 4,5 7 4,8 4,8 4,5 7 SW SW1 9 12 15 19 9 12 15 19 2,5 4 5 5 2,5 4 5 5 141

142

K0358 Centring clamps with ball or hexagon segments Material: Body 1.2842. Ball and hex segments 1.4112. Tension spring 1.4310. 4 H 5 , 0 + L D2 H7 1 Version: Body hardened and black oxidised. Ball and hex segments hardened and ground. F 3 H D3 Sample order: K0358.101203 1 + M D3 H7 D4 +0,5 A ±0,1 Note: Form A: With balls for holes where light marking is acceptable. Form B: With hexagons for sensitive hole surfaces. Application: To position and centre existing bores on the machining surface. Advantages: - Precise self-centring. - Distortion free clamping. - Large spread range. - Low overall height. Technical data: Repetitive accuracy ±0.025 Concentric accuracy ±0.05 Drawing reference: Form A: With balls for holes where light marking is acceptable. Form B: With hexagons for sensitive hole surfaces. 1) Mounting aid: pin to accurately position the mandrel segments. K 1 H 2 H H L D D SW A ±0,1 D1 D2 g6 A B 142

143

K0358 Centring clamps with ball or hexagon segments KIPP Centring clamps with ball segments Order No. Form K0358.101203 K0358.101504 K0358.101905 K0358.102306 K0358.102706 K0358.103106 K0358.103908 K0358.104708 K0358.105510 K0358.107112 K0358.108712 A A A A A A A A A A A A 3,5 4,5 5,5 7 7 9 11 11 15 17 25 D D min. max. 11,7 14,2 M4 14,5 18,5 M4 18,5 22,5 M5 22,5 26,5 M6 26,5 30,5 M6 30,5 38,5 M6 38,5 46,5 M8 46,5 54,5 M8 54,5 70,5 M10 70,5 86,5 M12 86,5 102,5 M16 KIPP Centring clamps with hexagon segments Order No. Form K0358.201504 K0358.201905 K0358.202306 K0358.202706 K0358.203106 K0358.203908 K0358.204708 K0358.205510 K0358.207112 K0358.208712 B B B B B B B B B B A 4,5 5,5 7 7 9 11 11 15 17 25 D D min. max. 14,5 18,5 M4 18,5 22,5 M5 22,5 26,5 M6 26,5 30,5 M6 30,5 38,5 M6 38,5 46,5 M8 46,5 54,5 M8 54,5 70,5 M10 70,5 86,5 M12 86,5 102,5 M16 D1 D2 D3 D4 H1 H2 H3 H4 D1 D2 D3 D4 H1 H2 H3 H4 10 12 15 20 20 25 30 30 45 60 60 1,5 2 2,5 3 3 4 4 4 5 5 5 12 15 20 20 25 30 30 45 60 60 2 2,5 3 3 4 4 4 5 5 5 4,3 4,3 5,3 6,4 6,4 6,4 8,4 8,4 4,3 5,3 6,4 6,4 6,4 8,4 8,4 H 15 10 19,5 14,5 4,2 9,8 3 8,6 23,5 16,5 11,6 10,4 28,8 19,8 14,2 28,8 19,8 14,2 13 13 32,7 23,1 14,2 11,9 39,2 27,2 17,8 15,5 39,2 27,2 18 15,7 10,5 54,6 40,6 23,7 19,1 13 17 63,1 46,1 28,3 23,7 73 51 30,2 25,7 H 19,5 14,5 9,8 8,6 23,5 16,5 11,6 10,4 28,8 19,8 14,2 28,8 19,8 14,2 13 13 32,7 23,1 14,2 11,9 39,2 27,2 17,8 15,5 39,2 27,2 18 15,7 10,5 54,6 40,6 23,7 19,1 13 17 63,1 46,1 28,3 23,7 73 51 30,2 25,7 1,5 2,3 2,3 2,3 2,3 4,6 4,6 4,6 9,3 9,3 9,3 2,3 2,3 2,3 2,3 4,6 4,6 4,6 9,3 9,3 9,3 L 3,5 5,5 7,5 6 6 7 7,5 7,5 9 10 10 L 5,5 7,5 6 6 7 7,5 7,5 9 10 10 M 2,5 3 3 4 4,5 4,5 4,5 4,5 5,5 5,5 5,5 M 3 3 4 4,5 4,5 4,5 4,5 5,5 5,5 5,5 SW Ball-Ø 3 3 4 5 5 5 6 6 8 10 14 K 4 4 4 4 8 8 8 16 16 16 2,5 4 4 4 4 8 8 8 16 16 16 SW 3 4 5 5 5 6 6 8 10 14 No. of balls 3 3 3 3 3 3 6 6 6 6 6 No. of hex 3 3 3 3 3 6 6 6 6 6 F kN 0,5 3,5 4 4,5 4,5 4,5 6,5 6,5 8 10 12,5 F kN 3,5 4 4,5 4,5 4,5 6,5 6,5 8 10 12,5 143

144

K1166 Centring clamps round A 1 H H L ≤D ≥D D 1 W S B 1 H H L ≤D ≥D D 1 W S Material: Carbon steel. Version: Hardened (33–39 HRC) and black oxidised. Sample order: K1166.10804 Note: The centring clamp enables a workpiece to be centred and clamped in the bore. The wedges generate higher clamping forces. The centring clamp is available with a cap screw or countersunk screw. Centring clamp with pull-down eff ect. Drawing reference: Form A: with countersunk screw Form B: with cap screw Dimension H refers to the height at ≥D. 1) O-ring Dimension L refers to the length at ≤D KIPP Centring clamp round Order No. Form K1166.10804 K1166.11005 K1166.11206 K1166.11608 K1166.20804 K1166.21005 K1166.21206 K1166.21608 A A A A B B B B 144 D M4 M5 M6 M8 M4 M5 M6 M8 D min. 8 10 12 16 8 10 12 16 D max. 10,3 12,3 16,3 22 10,3 12,3 16,3 22 H 5,5 6,4 8,6 11,5 5,5 6,4 8,6 H1 0,9 1,1 1,3 1,6 5,1 6,2 7,9 11,5 10,4 L 7,3 9,1 11,2 16,2 7,1 9 10,6 15,4 SW 2,5 3 4 5 3 4 5 6 Clamping force kN 0,9 1,5 2,1 4 1,5 2,5 5 9 Tightening torque Nm 2,1 4,3 7,3 18 2,7 5,4 9,1 25

145

K1166 Centring clamps round Technical information: - These clamps grip the inside diameter of a workpiece. - The wedge shape enables high clamping forces on the workpiece. 1 1 2 2 (Jaws exert positive down force) 1 Horizontal thrust against workpiece 2 Vertical thrust prevents the workpiece lifting Form A: Form B: unclamped clamped unclamped clamped Note: The clamp makes point contact with the bore wall when clamped. For accurate repeat positioning use these clamps together with a positioning unit. Clamping is carried out with the centring clamp. workpiece Positioning unit 145

148

K0815 Shoulder screws Form A 0,8 7 f A C D B G KIPP Shoulder screws Form A A 12 12 12 12 16 16 16 Order No. K0815.112045 K0815.112055 K0815.112065 K0815.112075 K0815.116055 K0815.116065 K0815.116075 K0815 Shoulder screws Form B 5 g A C E 0,8 D B G KIPP Shoulder screws Form B Order No. K0815.12045 K0815.12055 K0815.12065 K0815.12075 K0815.16055 K0815.16065 K0815.16075 148 A 12 12 12 12 16 16 16 B 45 55 65 75 55 65 75 B 45 55 65 75 55 65 75 SW C 18 18 18 18 24 24 24 C 18 18 18 18 24 24 24 SW Material: Carbon steel. Version: Tempered, black oxidised. Precision diameters ground. Sample order: K0815.112045 G 57 67 77 87 71 81 91 Material: Carbon steel. Version: Tempered, black oxidised. Precision diameters ground. Sample order: K0815.12065 G 57 67 77 87 71 81 91 E M12 M12 M12 M12 M16 M16 M16 E M12 M12 M12 M12 M16 M16 M16 SW 10 10 10 10 14 14 14 SW 10 10 10 10 14 14 14 D 22 22 22 22 25 25 25 D 22 22 22 22 25 25 25

149

K0817 Removable locating pins Forms A and C D3 L A C 60° B D3 L L1 L4 30° 0,8 6 h D KIPP Locating pins Form A and C Order No. Form C K0817.082 K0817.102 K0817.122 K0817.162 K0817.202 K0817.252 Order No. Form A K0817.08 K0817.10 K0817.12 K0817.16 K0817.20 K0817.25 K0818 D 8 10 12 16 20 25 0,8 6 h D D3 M3 M3 M5 M5 M5 M5 Material: Tool steel. Version: Hardened and ground (HRC 56 +2). Sample order: K0817.12 Note: The locating pins can be easily removed with an extractor. L1 -/14 -/17 -/20 -/26 -/30 -/30 L4 3/- 3/- 4/- 4/- 5/- 5/- B -/2,2 -/3 -/3,5 -/5 -/6 -/8 L 25 30 34 42 47 49 Removable locating pins Forms B and D D3 B D 60° B D3 L1 L2 L4 L1 L2 A A 6 p 1 D 0,8 6 p 1 D 0,8 KIPP Locating pins Form B and D Order No. Form B K0818.10 K0818.12 K0818.16 K0818.20 K0818.22 K0818.25 Order No. Form D K0818.102 K0818.122 K0818.162 K0818.202 K0818.222 K0818.252 D 10 12 16 20 22 25 0,8 6 h D 30° 0,8 6 h D D1 7 8 12 14 16 18 0,015 A 0,015 A Material: Tool steel. Version: Hardened and ground (HRC 55-60). Sample order: K0818.20 Note: Locating pins can be easily removed with an extractor. D3 M3 M5 M5 M5 M5 M5 L1 11 13 18 22 22 25 L2 11 12 14 15 17 17 L4 3 4 4,5 5 5 5 B -/3 -/3,5 -/5 -/6 -/7 -/8 149

150

K0350 Locating pins with ball-end Form A D ° 0 2 F E 6 g B ° 0 3 6 n A G Ø0,01 A 0,8 H J A 5 0 , 0 - 1 0 , 0 - C Material: Tool steel or stainless steel 1.4305. Version: Steel hardened and ground. Stainless steel ground and kolsterised. Sample order: K0350.12 Note: Ball end locating pins are specially designed to ease the locating process. The tendency to jam, caused by the locating hole not being at right angles to the pin or by the pushing force not being parallel to the pin axis, is minimized by the ball-end form (see illustration 1 for K0351 Form B) KIPP Locating pins with ball-end Form A Order No. Tool steel K0350.05 K0350.06 K0350.08 K0350.10 K0350.12 K0350.14 K0350.16 K0350.20 K0350.25 K0350.30 K0350.40 K0350.50 150 Order No. Stainless steel K0350.505 K0350.506 K0350.508 K0350.510 K0350.512 K0350.514 K0350.516 K0350.520 - - - - A 5 6 8 10 12 14 16 20 25 30 40 50 B 5 6 8 10 12 14 16 20 25 30 40 50 C 5 6 8 10 12 14 16 20 25 30 40 50 D 6 8 10 13 15 17 20 25 25 30 40 50 E 5 6 8 10 12 14 16 20 25 30 40 50 F 2 2 2 2,5 3 3,5 4 5 6 8 10 12 G M2,5 M3 M3 M3 M4 M4 M5 M5 M5 M6 M6 M6 H 4,5 5 6 6 8 8 10 10 10 12 12 12 J R 1 R 1 R 2 R 2,5 R 3 R 3,5 R 4 R 5 R 6 R 8 R 10 R 12

151

K0350 Locating pins with ﬂ attened ball-end Form C 60° D F E 6 g B ° 0 3 6 n A K Ø0,01 A 0,8 H A G J 1 0 , 0 - 5 0 , 0 - C Material: Tool steel or stainless steel 1.4305. Version: Steel hardened and ground. Stainless steel ground and kolsterised. Sample order: K0350.162 Note: Ball end locating pins are specially designed to ease the locating process. The tendency to jam, caused by the locating hole not being at right angles to the pin or by the pushing force not being parallel to the pin axis, is minimized by the ball-end form (see illustration 1 for K0351 Form B) KIPP Locating pins with ﬂ attened ball-end Form C Order No. Tool steel K0350.052 K0350.062 K0350.082 K0350.102 K0350.122 K0350.142 K0350.162 K0350.202 K0350.252 K0350.302 K0350.402 K0350.502 Order No. Stainless steel K0350.5052 K0350.5062 K0350.5082 K0350.5102 K0350.5122 K0350.5142 K0350.5162 K0350.5202 - - - - A 5 6 8 10 12 14 16 20 25 30 40 50 B 5 6 8 10 12 14 16 20 25 30 40 50 C 5 6 8 10 12 14 16 20 25 30 40 50 D 6 8 10 13 15 17 20 25 25 30 40 50 E 5 6 8 10 12 14 16 20 25 30 40 50 F 2 2 2 2,5 3 3,5 4 5 6 8 10 12 G M2,5 M3 M3 M3 M4 M4 M5 M5 M5 M6 M6 M6 H 4,5 5 6 6 8 8 10 10 10 12 12 12 J R 1 R 1 R 2 R 2,5 R 3 R 3,5 R 4 R 5 R 6 R 8 R 10 R 12 K 1,5 1,8 1,9 2,5 2,5 3,9 4,3 5 5,6 8,8 12,8 16,7 151

152

K0351 Locating pins with ball-end Form B E D 8 , 0 F ° 0 2 6 g A 6 n B 3 0 ° 0,8 Ø0,01 A A G J 0,8 H 1 0 , 0 - 5 0 , 0 - C Material: Tool steel or stainless steel 1.4305. Version: Steel hardened and ground. Stainless steel ground and kolsterised. Sample order: K0351.20 Note: Ball end locating pins are specially designed to ease the locating process. The tendency to jam, caused by the locating hole not being at right angles to the pin or by the pushing force not being parallel to the pin axis, is minimized by the ball-end form (see illustration 1). 1 KIPP Locating pins with ball-end Form B Order No. Tool steel K0351.06 K0351.08 K0351.10 K0351.12 K0351.14 K0351.16 K0351.20 K0351.22 K0351.25 152 Order No. Stainless steel K0351.506 K0351.508 K0351.510 K0351.512 K0351.514 K0351.516 K0351.520 - - A 6 8 10 12 14 16 20 22 25 B 4 6 7 8 10 12 14 16 18 C 6 8 10 12 14 16 20 22 25 D 4 6 7 8 10 12 14 16 18 E 6 8 10 12 14 16 20 22 25 F 2 2 2,5 3 3,5 4 5 5,5 6 G M2,5 M3 M3 M4 M4 M5 M5 M5 M5 H 4,5 6 6 8 8 10 10 10 10 J R 1 R 2 R 2,5 R 3 R 3,5 R 4 R 5 R 5,5 R 6

153

K0351 Locating pins with ﬂ attened ball-end Form D 60° E D 8 , 0 F ° 0 2 6 g A 6 n B 3 0 ° 0,8 K Ø0,01 A A G J 0,8 H 5 0 , 0 - 1 0 , 0 - C Material: Tool steel or stainless steel 1.4305. Version: Steel hardened and ground. Stainless steel ground and kolsterised. Sample order: K0351.162 Note: Ball end locating pins are specially designed to ease the locating process. The tendency to jam, caused by the locating hole not being at right angles to the pin or by the pushing force not being parallel to the pin axis, is minimized by the ball-end form (see illustration 1 for K0351 Form B) KIPP Locating pins with ﬂ attened ball-end Form D Order No. Tool steel K0351.062 K0351.082 K0351.102 K0351.122 K0351.142 K0351.162 K0351.202 K0351.222 K0351.252 Order No. Stainless steel K0351.5062 K0351.5082 K0351.5102 K0351.5122 K0351.5142 K0351.5162 K0351.5202 - - A 6 8 10 12 14 16 20 22 25 B 4 6 7 8 10 12 14 16 18 C 6 8 10 12 14 16 20 22 25 D 4 6 7 8 10 12 14 16 18 E 6 8 10 12 14 16 20 22 25 F 2 2 2,5 3 3,5 4 5 5,5 6 G M2,5 M3 M3 M4 M4 M5 M5 M5 M5 H 4,5 6 6 8 8 10 10 10 10 J R 1 R 2 R 2,5 R 3 R 3,5 R 4 R 5 R 5,5 R 6 K 1,7 2 2,5 2,5 3,76 4,3 5 5 5,6 153

154

K1094 Locating pins with internal thread B G R 15° C T 8 , 0 A 8 , 0 4 L 1 L 2 L 0,8 30° D2 n6 Ø 0,01 A B ° 0 6 D1 g6 D1 g6 Material: Steel. Version: Hardened and ground (HRC 60 ±2). Sample order: K1094.208 Note: Locating pins are specially designed to ease the locating process. When used in conjunction with the hardened locating bushes K1095, they allow for a rapid, precise and low-wear workpiece exchange. Drawing reference: Form B: cylindrical pin Form C: rhomboid pin KIPP Locating pins, short Order No. Form B K1094.208 K1094.210 K1094.212 K1094.216 K1094.220 Order No. Form C K1094.408 K1094.410 K1094.412 K1094.416 K1094.420 KIPP Locating pins, long Order No. Form C K1094.508 K1094.510 K1094.512 K1094.516 K1094.520 Order No. Form B K1094.308 K1094.310 K1094.312 K1094.316 K1094.320 154 Version short short short short short Version long long long long long D1 8 10 12 16 20 D1 8 10 12 16 20 D2 6 7 8 12 14 D2 6 7 8 12 14 G M2,5 M2,5 M3 M4 M5 G M2,5 M2,5 M3 M4 M5 L1 11,4 13,7 16 20 25,5 L1 17,4 21,7 24 29 35,5 L2 6 7 8 12 14 L2 6 7 8 12 14 L4 7,4 9,7 12 15 19,5 L4 7,4 9,7 12 15 19,5 R 2,5 3 3,5 5 6 R 2,5 3 3,5 5 6 B -/2,5 -/3,0 -/3,5 -/5 -/6 B -/2,5 -/3,0 -/3,5 -/5 -/6 T 5 5 6 8 10 T 5 5 6 8 10

155

K1095 Locating bushes for locating pins D1 H7 30° A F 1 L 8 , 0 8 , 0 D3 n6 Ø 0,01 A Material: Steel. Version: Hardened and ground (HRC 60 ±2). Sample order: K1095.0812 KIPP Locating bushes for locating pins Order No. Version K1095.0812 K1095.1014 K1095.1216 K1095.1620 K1095.2026 K1095.0818 K1095.1022 K1095.1224 K1095.1630 K1095.2036 short short short short short long long long long long D1 8 10 12 16 20 8 10 12 16 20 D3 12 15 18 26 30 12 15 18 26 30 L1 12 14 16 20 26 18 22 24 30 36 F 1,2 1,5 1,5 1,5 2,5 1,2 1,5 1,5 1,5 2,5 155

156

K0356 Locating pins expanding A B 3 1 0 -0,013 B1 +0 B + - 0 0 , 0 1 3 , 0 - 0 + B B1 +0 -0,013 D +0 -0,013 B2 +0 -0,013 D +0 -0,013 9 1 1 1 9 1 1 1 Material: Carbon steel. Version: Tempered and black oxidised. Locating diameter and guide faces ground. Sample order: K0356.1610 Note: These expanding locating pins enable e.g. tooling plates to be positioned in the T-slots of machine tables (see illustration). The plates to be positioned must have two holes matching the expanding pin diameter. The expansion screw has a broached through hexagonal hole allowing the pin to be tightened or loosened from two sides. Drawing reference: 1) tooling plate 2) clamp straps 3) machine table 4) expanding locating pin 1 4 2 3 KIPP Locating pins, expanding Order No. Form K0356.1610 K0356.1612 K0356.1614 K0356.2024 A A B B 156 D 16 16 16 20 B 10 12 14 24 B1 20 22 16 28 B2 - - 18 32 Recommended Ø 16,01 ±0,01 16,01 ±0,01 16,01 ±0,01 20,01 ±0,01

157

K0918 Positioning units l ) e k o r t s e b a t s u d a ( j B J A F ØD ØC , 8 0 0,8 8 , 0 ØEg6 ØH P U grub screw ØG H7 0,04 A , 8 0 T S Material, version: Body and locating pin carbon steel, tempered and black oxidised. Handle carbon steel, tempered. Ball knob black Duroplast PF 31. Sample order: K0918.2808 Note: * Admissible hand force for the handle. ** Workpieces up to this weight can be located. K L A pin retracted Ø Q R / 2 M R travel N hole for cap screws pin extended 1. roughly position 2. raise pin 3. located workpiece centers KIPP Positioning units Order No. K0918.2808 K0918.4212 A 48 61 B 12 15 C 20 30 D 34 48 E 28 42 F 12 14 G 8 12 H 60 80 J 10 13 K 17 23 L 5 7 M N 46 M5 63 M6 P 71 94 Q 20 25 R 100 90 S 13 15 T U 5 M4x5 8 M6x8 Hand force Max. FH N 150* 200* workpiece weight kg 250** 300** 157

160

K0819 V-blocks, vertical hardened 0,8 90° C 0 , 8 3 0 , 0 ± F D J 1 0 , 0 ± K G A E 0,8 B hole for locating bush ML H KIPP V-blocks vertical Material: Carbon steel. Version: Black oxidised. Prism and contact faces ground. Sample order: K0819.60008032 Order No. K0819.60008032 A 32 B Ø for locating bush 12 H6 C min. 10 C max. 25 C Test-Ø D 15±0,003 8,5 E 13 F G 40,1 C/2 x√ 2+22 H 25 J 45 K 25 L 9 M 14 K0819 V-blocks, vertical 90° hardened 0 , 8 0,8 C , 3 0 0 ± 1 2 B 5 1 5 , 8 Ø12 H6 - hole for locating bush , 6 5 0 4 5 1 0,8 Ø9 Ø14 5 4 1 0 , 0 ± 5 2 25 ±0,01 45 KIPP V-blocks vertical Order No. K0819.60008040 160 C min. 15 Material: Carbon steel. Version: Black oxidised. Prism and contact faces ground. Sample order: K0819.60008040 C max. 50 C Test-Ø 30±0,003 B C/2x√2+20

161

K0819 V-blocks, vertical hardened 90° C 0 , 8 0,8 GA E 0,8 B 4 0 , 0 ± F 5 3 D 5 8 1 0 , 0 ± 0 5 50 85 KIPP V-blocks vertical Material: Carbon steel. Version: Black oxidised. Prism and contact faces ground. Sample order: K0819.60012063 A 63 75 63 75 B Ø for shoulder screw 12 F7 12 F7 16 F7 16 F7 C min. 15 15 15 15 C max. 80 100 80 100 C Test-Ø 50±0,003 70±0,003 50±0,003 70±0,003 D M12 M12 M16 M16 E 22 22 25 25 F G Suitable shoulder screw 95,071 C/2 x√ 2+34,716 K0815.112055 124,142 C/2 x√2+39,645 K0815.112055 95,071 C/2 x√ 2+34,716 K0815.116065 124,142 C/2 x√2+39,645 K0815.116065 Order No. K0819.60012063 K0819.60012075 K0819.60016063 K0819.60016075 K0819 V-blocks, vertical 90° C hardened 0 , 8 0,8 , 4 0 0 ± E F 0 4 A D 0,8 B 50 ±0,01 85 KIPP V-blocks, vertical Material: Carbon steel. Version: Black oxidised. Prism and contact faces ground. Sample order: K0819.60512063 Order No. K0819.60512063 K0819.60512075 K0819.60516063 K0819.60516075 A 63 75 63 75 B Ø for shoulder screw 12 F7 12 F7 16 F7 16 F7 C min. 15 15 15 15 C max. 80 100 80 100 C Test-Ø 50±0,003 70±0,003 50±0,003 70±0,003 D 32 32 25 25 E F Suitable shoulder screw 95,071 C/2x√2+34,716 K0815.112065 124,142 C/2x√2+39,645 K0815.112065 95,071 C/2x√2+34,716 K0815.116065 124,142 C/2x√2+39,645 K0815.116065 161

162

K0819 V-blocks split left hand 25 hardened 1 0 , 0 ± 0 4 1 - 0 8 60 88,96 ±0,01 A hole for shoulder screw Material: Carbon steel. Version: Black oxidised. Half prism (30°) and contact faces ground. Sample order: K0819.6301230 Note: Right-hand and left-hand split V-blocks are used for positioning round parts. Split V-blocks permit adjustment to the respective workpiece diameter. right hand hardened 50 ±0,01 1 - 0 8 , 1 0 0 ± 0 4 88,96 ±0,01 A hole for shoulder screw 50 ±0,01 D KIPP V-blocks split Order No. right Order No. left K0819.6301230 K0819.6311230 K0819.6301630 K0819.6311630 A 12 F7 16 F7 B M12 M16 C 23 20 D min. 50 50 D max. 600 600 Suitable shoulder screw K0815.112055 K0815.116055 162

163

K0822 Eccentric supports B 0,8 1 0 , 0 ± A D 0,8 C E KIPP Eccentric supports Order No. K0822.08016 K0822.08020 K0822.08025 K0822.08032 K0822.08040 K0822.08050 K0822.10020 K0822.10025 K0822.10032 K0822.10040 K0822.10050 K0822.10063 K0822.12020 K0822.12025 K0822.12032 K0822.12040 K0822.12050 K0822.12063 K0822.12080 K0822.12100 K0822.12125 K0822.16025 K0822.16032 K0822.16040 K0822.16050 K0822.16063 K0822.16080 K0822.16100 K0822.16125 A 16 20 25 32 40 50 20 25 32 40 50 63 20 25 32 40 50 63 80 100 125 25 32 40 50 63 80 100 125 Material: Special steel alloy. Version: Tempered, black oxidised. Contact faces ground. Sample order: K0822.10040 B 25 25 25 25 25 25 32 32 32 32 32 32 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 C hole for DIN 912 cap screw M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 M16 D 7 7 7 7 7 7 9 9 9 9 9 9 7 12 12 12 12 12 22 22 22 8 15 15 15 15 35 35 35 E 3,5 3,5 3,5 3,5 3,5 3,5 5 5 5 5 5 5 7 7 7 7 7 7 7 7 7 10 10 10 10 10 10 10 10 163

164

K0823 Supports B 0,8 1 0 , 0 ± A D 0,8 C KIPP Supports Order No. K0823.08016 K0823.08020 K0823.08025 K0823.08032 K0823.08040 K0823.08050 K0823.10020 K0823.10025 K0823.10032 K0823.10040 K0823.10050 K0823.10063 K0823.12020 K0823.12025 K0823.12032 K0823.12040 K0823.12050 K0823.12063 K0823.12080 K0823.12100 K0823.16025 K0823.16032 K0823.16040 K0823.16050 K0823.16063 K0823.16080 K0823.16100 K0823.16125 164 A 16 20 25 32 40 50 20 25 32 40 50 63 20 25 32 40 50 63 80 100 25 32 40 50 63 80 100 125 Material: Carbon steel. Version: Tempered, black oxidised. Contact faces ground. Sample order: K0823.08016 C hole for DIN 912 cap screw M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 M16 D 7 7 7 7 7 7 9 9 9 9 9 9 7 12 12 12 12 12 22 22 8 15 15 15 15 35 35 35 B 25 25 25 25 25 25 32 32 32 32 32 32 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50

165

K0816 Locating supports 8 , 0 0,8 B ±0,01 D Ø0,02 A 1 0 , 0 ± A E 0,8 8 , 0 A C Material: Carbon steel. Version: Tempered. OD and support faces ground. Sample order: K0816.08020 Note: Depending on the system (M8, M12, M16), the locating supports are positioned and secured using shoulder screws or locating sleeves with socket head screw. KIPP Locating supports Order No. K0816.12025 K0816.12050 K0816.12075 K0816.12100 K0816.16050 K0816.16075 K0816.16100 K0816.16125 A 25 50 75 100 50 75 100 125 B 40 40 40 50 50 50 50 50 C Ø for shoulder screw 12 H7 12 H7 12 H7 12 H7 16 H7 16 H7 16 H7 16 H7 D 20 20 20 20 26 26 26 26 E 12 12 12 22 15 15 25 25 Suitable shoulder screw K0815.12045 K0815.12045 K0815.12045 K0815.12055 K0815.16055 K0815.16055 K0815.16065 K0815.16065 165

166

K0827 Support blocks 1 0 , 0 ± A Material: Carbon steel. Version: Tempered, black oxidised. Contact faces ground. Sample order: K0827.36012020 Note: Support blocks are for placing under long workpieces to prevent bending during machining or clamping. The tapped hole is for mounting ﬁ xture elements between the grid holes. KIPP Support blocks Order No. K0827.36012020 K0827.36012025 K0827.36012032 K0827.36012040 K0827.36012050 K0827.36012063 K0827.36012080 K0827.36012100 K0827.36012125 K0827.36016025 K0827.36016032 K0827.36016040 K0827.36016050 K0827.36016063 K0827.36016080 A 20 25 32 40 50 63 80 100 125 25 32 40 50 63 80 K0827.36016100 100 166 B hole for DIN 912 screw M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 C M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 D 7 12 19 27 37 37 37 37 37 8 15 23 33 46 46 46 E 20 25 32 40 35 35 35 35 35 25 32 40 35 35 35 35 F 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 G 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 H 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

167

K0824 Seating blocks adjustable 0,8 1 0 , 0 ± H 0,8 1 B B Material: Carbon steel. Version: Tempered, black oxidised. Contact faces ground. Sample order: K0824.12125 Note: The tapped hole is for mounting ﬁ xture components. The slot allows the riser to be set in any desired position. 1 H D 30 50 L1 L KIPP Seating blocks adjustable Order No. K0824.12025 K0824.12032 K0824.12040 K0824.12050 K0824.12125 K0824.12132 K0824.12140 K0824.12150 K0824.16032 K0824.16040 K0824.16050 K0824.16132 K0824.16140 K0824.16150 D M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 L 90 90 90 90 140 140 140 140 90 90 90 140 140 140 L1 40 40 40 40 90 90 90 90 40 40 40 90 90 90 B 38 38 38 38 38 38 38 38 50 50 50 50 50 50 B1 13 13 13 13 13 13 13 13 17 17 17 17 17 17 H 25 32 40 50 25 32 40 50 32 40 50 32 40 50 H1 12 19 27 37 12 19 27 37 15 23 33 15 23 33 167

168

K0889 Workpiece supports C 1 H 2 H D1 D 3 H F D Material: Steel. Version: Case-hardened, black oxidised and ground Sample order: K0889.006 H 1 Note: These supports are placed under long or thin workpieces to prevent vibration or bending during milling, drilling, grinding or shaping operations. L1 L2 L3 L4 Drawing reference: 1) set screw 3 D 2 D E L D1 KIPP Workpiece supports Order No. K0889.006 K0889.010 168 C 4 6 D 10 16 D1 M6 D2 8,2 M10 12,5 D3 16,2 24,4 E 20 30 H 19 30 H1 19,5 31 H2 7 10 H3 9 10 L 92 149 L1 25,5 44 L2 39 61 L3 20 32 L4 6 11 F kN 3 15

169

K1224 Support elements N k 8 ≤ i g n d a o l Ø55 M8 4 0 ° 3 8 - 8 7 h t a p l e v a r t 6 1 unlock lock Ø49,4 A , 5 0 1 0 1 SW 6 5 2 1 2 1 2 W S Material: Main body hardened steel. Housing aluminium. Version: Main body nitrated, manganese phosphated and ground. Housing red anodized. Note: The support element is for supporting overhanging workpiece parts. It prevents vibration and bending during machining. Method of operation: 1. Turn the cam screw (hex. socket SW 6) on the side of the housing, the support bolt will move out under light spring load until it makes contact with the workpiece. 2. Continue to turn to “lock” position. The support bolt locks without changing position. 3. Turn the cam screw in the opposite direction and the support bolt will unlock. Continue turning to the „unlock“ position and the support bolt will slide back into the body. Assembly: Mount the support element to the ﬁ xture using the two M6 tapped holes. Alternatively: Exchange the M12x10 plug screw for a M12x30 grub screw and mount the support directly onto the machine table with a T-nut. For safe operation the M12 tapped hole must always be ﬁ lled. It is possible to countersink the support element by 16 mm. Various rest pads can be mounted into the M8 tapped hole on the support bolt. Supplied with M12x30 grub screw and M12 nut for T-slots (DIN 508). Drawing reference: 1) grub screw M12x30 DIN 913 (exchangeable) 2) nut for T-slots M12x14 DIN 508 A 6 M 13 13 unlock lock unlock lock KIPP Support element Order No. K1224.0508 Load capacity N 8000 Travel path 5 169

170

K0917 Positioning units spring-loaded A 30° 0,03 A 0.8 E A D 0.8 ØB 0.8 B 1 0 , 0 ± A 0.8 0.8 F 8 . 0 8 . 0 ØCg6 A-A ØM ØL air vent A E 6 6 8 8 E 6 6 8 8 A J 16 16 22 22 J 16 16 22 22 H 25 25 30 30 H 25 25 30 30 F 15 15 20 20 F 15 15 20 20 G 35 35 40 40 G 35 35 40 40 K 4,5 4,5 4,5 4,5 K 4,5 4,5 4,5 4,5 L 3,5 4,5 5,5 7,5 L 3,5 4,5 5,5 7,5 M 6 7 9 11 M 6 7 9 11 N ØK N 7,4 7,4 9,3 9,3 N 5,4 5,4 7,3 7,3 J A H ØG KIPP Positioning units, spring-loaded Order No. Form K0917.15060 K0917.15070 K0917.20090 K0917.20110 A A A A Order No. Form K0917.15061 K0917.15071 K0917.20091 K0917.20111 B B B B A 13 13 18 18 A 15 15 20 20 B 15 15 20 20 B 15 15 20 20 C 15 15 20 20 C 15 15 20 20 D 7,5 7,5 10 10 D 7,5 7,5 10 10 170 Material, version: Body carbon steel, hardened and black oxidised. Locating pin hardened tool steel. Sample order: K0917.15060 Note: * The conical spigot can position holes within these limits. mounting hole ØR H7 S T S R 15 M4 15 M4 20 M4 20 M4 S R 15 M4 15 M4 20 M4 20 M4 T 16 16 21 21 T 16 16 21 21 Receiving Spring force hole ø3,8 - ø5,2* ø4,8 - ø6,2* ø5,8 - ø8,2* ø7,8 - ø10,2* cone N 6,4 - 19,3 6,4 - 19,3 5,5 - 20,5 5,5 - 20,5 Receiving Spring force hole ø3,8 - ø5,2* ø4,8 - ø6,2* ø5,8 - ø8,2* ø7,8 - ø10,2* cone N 6,4 - 19,3 6,4 - 19,3 5,5 - 20,5 5,5 - 20,5

171

Technical information workpiece ready for positioning workpiece positioned conventional method new method K0917 Form B spring-loaded positioning unit conical spigot pressed down play no play The conical spigot is pushed down when the workpiece is mounted on the positioning unit. The conical spigot ensures precise positioning. round pin K0917 Form B spring-loaded positioning unit K0912 swing clamp K0917 spring-loaded positioning unit Note: To prevent the positioning unit lifting the workpiece, hold it down by hand when loosening the swing clamp. 171

172

K0825 Adjustable supports G1 B A C G D 8 H 0 1 Ø 1 W S W S Material: Carbon steel. Version: Black oxidised. Adjustment spindle tempered. Sample order: K0825.16100 Note: Inserts K0826 can be mounted in the top to suit the application. KIPP Adjustable supports Order No. K0825.12040 K0825.12050 K0825.12070 K0825.12100 K0825.12150 K0825.16040 K0825.16050 K0825.16070 K0825.16100 K0825.16150 172 A min. 40 50 70 100 150 40 50 70 100 150 B max. 10 20 40 50 100 10 20 40 50 100 C 30 30 30 30 30 30 30 30 30 30 D 40 40 40 50 50 40 40 40 50 50 SW 36 36 36 46 46 36 36 36 46 46 SW1 30 30 30 36 36 30 30 30 36 36 G M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 G1 M20x1,5 M20x1,5 M20x1,5 M24x2 M24x2 M20x1,5 M20x1,5 M20x1,5 M24x2 M24x2

173

K0826 Inserts 1 Ø30 R30 6 2 Ø30 90° 3 90° Ø30 24 5 0 1 0 1 Ø10 g6 8 1 5 0 1 Ø10 g6 8 1 0 1 Ø10 g6 Material: Carbon steel. Version: Tempered to 1100-1200 N/mm², black oxidised. Sample order: K0826.02 Drawing reference: 1) rounded insert 2) cone insert 3) prism insert KIPP Inserts Order No. K0826.01 K0826.02 K0826.03 Version rounded insert cone insert prism insert 173

174

K1233 Atlas jack with locknut K1233-01 K1233-02 F Ø50 K1233-03 K1233-04 F Material: Carbon steel. Version: Hammertone, spindle with 30 x 6 trapezoidal thread. 1 H H S SW46 B 0 9 5 7 37 87 110 1 H H ø12x11 S B 120 160 1 KIPP Atlas jack with locknut Order No. Adjustment range base plate K1233.01 K1233.02 K1233.03 K1233.04 100 - 140 140 - 200 200 - 320 320 - 540 76x111 76x111 90x160 90x160 H 100 140 200 320 H1 140 200 320 540 B 18 18 22 22 S 17 17 22 25 F kN 60 60 40 25 174

175

K0919 Workpiece supports adjustable Material: Carbon steel 1.0503. Version: Black oxidised. Sample order: K0919.08020 Note: Workpiece supports are for supporting overhanging workpiece parts to prevent vibrations and bending during machining. They should not be subjected to strong forces from a clamping element and are not intended as supports under a clamping point. M Q P L X W V C U R E S T D F A G K H B N J (4x) knurled screw locknut 1.) Turning the knurled screw moves the support arm up or down. 2.) Once the rest is in contact with the worpiece, the screw can be locked with the locknut. KIPP Workpiece supports, adjustable Order No. K0919.08020 K0919.10027 A 40 55 B 50 65 C 27 34 D 70 E 24 F 6 95 31,5 8,5 G 28 38 H 38 48 J 6,6 9 K 15 18 M N L 16 M6x16 30 20 M8x22 40 P 17 23 Q 6 8 R 39 S 15 U V W X T 10 56 29 30 24 51,5 20 15 68 34 36 29 Clamping Tightening force N 300 350 torque max. Nm 1,5 2 175

176

K0920 Workpiece supports adjustable F Ø A Ø B L K Ø H 1 2F F D E F C G Material: Carbon steel. Version: Body black oxidised. Rest pad hardened and black oxidised. Sample order: K0920.08023 K0920 K0821 KIPP Workpiece supports, adjustable Order No. K0920.08023 K0920.10028 K0920.12031 176 A 15 19 22 B 6 8 10 C (travel) 3 4 4 D 5 6 6 E 18 22 25 F 16 20 24 G 13 17 19 H M8 M10 M12 K 20 25 28 L 13,2 16,3 22,3 F N 200 300 400 Spring force initial pressure F1 approx. N Spring force ﬁ nal pressure F2 approx. N 1,5 1,8 1,8 3 3 3

177

K0921 Workpiece supports F ØE L M 1 F 2 F H Material: Carbon steel. Version: Body black oxidised. Thrust pin tempered and black oxidised. Sample order: K0921.06029 Drawing reference: M = ball pressure screw N = through hole for socket head screw DIN 912 D C G 1) rotation lock 2) screw rest 3) hexagonal nut J A F K B 1 N 2 3 K0921 L M N F N Spring force Spring force initial pressure ﬁ nal pressure F1 approx. N F2 approx. N KIPP Workpiece supports Order No. K0921.06029 K0921.08037 K0921.12047 A 38 50 75 B 19 22 32 C 29 37 47 D 35 47 57 E 12 16 25 F 15 20 30 G 15 20 27 H 17,6 21,1 28,3 J 13 16 25 K 8 M6x10 M6x16 M6 4000 10 M8x15 M8x20 M8 6000 15 M12x20 M12x30 M12 9000 0 0 1 6 7 11 177

178

K0922 Workpiece support cylinders F F ØA ØB 1 2F F G W S L D C E K J A-A Material: Carbon steel. Version: Body black oxidised. Thrust pin hardened and black oxidised. Sample order: K0922.06039 Drawing reference: J = mounting screw L = ball-end thrust screw M = grub screw 1) screw rest 2) hexagonal nut 3) ball-end thrust screw A A M KIPP Workpiece support cylinders Order No. K0922.06039 K0922.08052 K0922.12070 K0922.16080 A 28 35 50 60 B 14 19 26 33 C 33 42 60 70 D 39 52 70 80 E 10 14 16 22 F G 13,1 22,2 17,2 27,5 28,1 42,1 26,6 47,4 J M6 M8 M12 M16 K L M6x12 M6x16 M8x16 M8x20 M M4x8 M4x8 M12x24 M12x30 M5x12 SW 4 5 8 M16x32 M12x30 M5x15 10 3 F N 4000 6000 9000 9000 178 1 2 K0922 Spring force initial pressure F1 approx. N Spring force ﬁ nal pressure F2 approx. N 10 10 15 15 22 27 30 35

179

K0297 Support bolts B 1 A G C D E W S Material: Carbon steel, tempered. Version: Black oxidised. Sample order: K0297.16016 Note: The rounded nose also allows support bolts to be used as positioning elements for workpieces with matching holes. The versions K0297.08016 and K0297.20040 have a hex collar. SW1 Drawing reference: 1) locknut KIPP Support bolts Order No. K0297.06006 K0297.06012 K0297.08008 K0297.08016 K0297.10010 K0297.10020 K0297.12012 K0297.12024 K0297.16016 K0297.16032 K0297.20020 K0297.20040 A 6 6 8 8 10 10 12 12 16 16 20 20 B 37 43 45 53 58 68 72 84 89 105 115 135 C 6 12 8 16 10 20 12 24 16 32 20 40 D 6 6 7 7 8 8 10 10 13 13 15 15 E 25 25 30 30 40 40 50 50 60 60 80 80 G M6 M6 M8 M8 M10 M10 M12 M12 M16 M16 M20 M20 SW SW1 13 13 13 13 17 17 19 19 24 24 36 36 10 10 13 13 17 17 19 19 24 24 30 30 179

180

K0828 Support bolts 1 B A 4 F E C D Material: Carbon steel. Version: Tempered and black oxidised. Sample order: K0828.08041 Drawing reference: 1) locknut KIPP Support bolts Order No. K0828.08041 K0828.08051 K0828.12057 K0828.12072 K0828.16057 K0828.16072 180 A M8 M8 M12 M12 M16 M16 B 8 8 12 12 16 16 C 41 51 57 72 57 72 D 17 17 24 24 30 30 E 30 40 43 58 43 58 F 7 7 10 10 10 10

181

K0307 Rest pads A B W S D E Material: Carbon steel or brass Version: Tempered and black oxidised. Sample order: K0307.16055 KIPP Rest pads Order No. Material K0307.06030 K0307.06040 K0307.06050 K0307.08036 K0307.08046 K0307.08056 K0307.10042 K0307.10048 K0307.10058 K0307.10068 K0307.12048 K0307.12070 K0307.12080 K0307.16055 K0307.16075 K0307.16085 K0307.12148 K0307.16155 carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel carbon steel brass brass A 30 40 50 36 46 56 42 48 58 68 50 70 80 55 75 85 50 55 B 25 35 45 30 40 50 35 40 50 60 42 60 70 45 65 75 42 45 D M6 M6 M6 M8 M8 M8 M10 M10 M10 M10 M12 M12 M12 M16 M16 M16 M12 M16 E 11,5 11,5 11,5 15 15 15 19,6 19,6 19,6 19,6 21,9 21,9 21,9 27,7 27,7 27,7 21,9 27,7 SW 10 10 10 13 13 13 17 17 17 17 19 19 19 24 24 24 19 24 181

182

K0821 Extension pieces 1 D D E T L L1 SW Material: Carbon steel. Version: Black oxidised. Sample order: K0821.120750 Note: Extension pieces are used to extend self-aligning pads, spring plungers, positioning feet, rest pads etc. KIPP Extension pieces Order No. K0821.08025 K0821.08032 K0821.08040 K0821.10025 K0821.10032 K0821.10040 K0821.10050 K0821.10075 K0821.120320 K0821.120500 K0821.120750 K0821.160320 K0821.160500 K0821.160750 K0821.108025 K0821.108032 K0821.108040 K0821.112032 K0821.112050 K0821.112075 K0821.116032 K0821.116050 K0821.116075 182 A 25 32 40 25 32 40 50 75 32 50 75 32 50 75 25 32 40 32 50 75 32 50 75 B 13 13 13 15 15 15 16 16 18 18 18 25 25 25 19 19 19 30 30 30 30 30 30 C 15 15 15 17 17 17 20 20 20 20 20 20 30 30 15 15 15 20 20 20 20 30 30 D M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M16 M16 M16 M8 M8 M8 M12 M12 M12 M16 M16 M16 D1 M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M16 M16 M16 M8 M8 M8 M12 M12 M12 M16 M16 M16 E 15 15 15 19,6 19,6 19,6 19,6 19,6 25,4 25,4 25,4 31,2 31,2 31,2 15 15 15 25,4 25,4 25,4 31,2 31,2 31,2 SW 13 13 13 17 17 17 17 17 22 22 22 27 27 27 13 13 13 22 22 22 27 27 27

183

K0308 Jack screws C G F E A B D Material: Carbon steel. Version: Black oxidised. Sample order: K0308.0803006 Drawing reference: 1) screw rest 2) jack screw Jack screw for mounting various rests 1 2 KIPP Jack screws Order No. K0308.0803006 K0308.0804006 K0308.1003808 K0308.1004808 K0308.1205110 K0308.1206610 K0308.1606212 K0308.1607712 A 30 40 38 48 51 66 62 77 B 20 30 24 34 33 48 40 55 C 13 13 17 17 22 22 27 27 D 5 5 6 6 7 7 10 10 E 14,4 14,4 18,9 18,9 24,5 24,5 30,1 30,1 F M8 M8 M10 M10 M12 M12 M16 M16 G M6x6 M6x6 M8x8 M8x8 M10x10 M10x10 M12x12 M12x12 183

184

K0923 Jack screws extended B A C E H F DG Material: Carbon steel. Version: Black oxidised. Sample order: K0923.08040 Drawing reference: 1) screw rest 2) jack screw Jack screw for mounting various rests 1 2 G M8 M8 M10 M10 M12 M12 M16 M16 H M6x6 M6x6 M8x8 M8x8 M10x10 M10x10 M12x12 M12x12 KIPP Jack screws extended Order No. K0923.08040 K0923.08050 K0923.10050 K0923.10060 K0923.12065 K0923.12080 K0923.16080 K0923.16095 184 A 40 50 50 60 65 80 80 95 B 10 20 10 20 15 30 15 30 C 12 12 14 14 19 19 24 24 D 16 16 20 20 24 24 32 32 E 13 13 17 17 22 22 27 27 F 13 13 17 17 22 22 27 27

185

K0924 Extensions for jack screws B A F ED E KIPP Extensions for jack screws Order No. K0924.08032 K0924.08040 K0924.08050 K0924.08065 K0924.08080 K0924.08100 K0924.10040 K0924.10050 K0924.10065 K0924.10080 K0924.10100 K0924.12050 K0924.12065 K0924.12080 K0924.12100 K0924.12125 K0924.12160 K0924.16050 K0924.16065 K0924.16080 K0924.16100 K0924.16125 K0924.16160 A 32 40 50 65 80 100 40 50 65 80 100 50 65 80 100 125 160 50 65 80 100 125 160 B 44 52 62 77 92 112 54 64 79 94 114 69 84 99 119 144 179 74 89 104 124 149 184 C C 13 13 13 13 13 13 17 17 17 17 17 22 22 22 22 22 22 27 27 27 27 27 27 Material: Carbon steel. Version: Black oxidised. Sample order: K0924.08032 D 16 16 16 16 16 16 20 20 20 20 20 24 24 24 24 24 24 32 32 32 32 32 32 extended jack screw jack screw extension F 20 20 20 20 20 20 25 25 25 25 25 30 30 30 30 30 30 32 40 40 40 40 40 185 E M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16

186

K0829 Grub screws with thrust pad D C A SW B Material, version: Thrust pad: carbon steel, tempered, black oxidised. Grub screw: carbon steel, tempered. Sample order: K0829.08X43 KIPP Grub screws with thrust pad Order No. K0829.08X43 K0829.08X63 K0829.10X64 K0829.10X84 K0829.12X65 K0829.12X85 K0829.12X105 K0829.16X85 K0829.16X105 K0829.16X130 K0829.20X105 K0829.20X130 K0829.20X155 186 A 43 63 64 84 65 85 105 85 105 130 105 130 155 B 16 16 20 20 25 25 25 32 32 32 40 40 40 C 9 9 11 11 13 13 13 15 15 15 16 16 16 D M8 M8 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 SW 4 4 5 5 6 6 6 8 8 8 10 10 10

187

K0294 Rest pads A B C D1 1,6 D1 R D1 D2 Material: Body carbon steel. Version: Body tempered and black oxidised. Sample order: K0294.106012 1 , 0 ± H 5 2 , 0 ± H 3,2 3,2 1 0 , 0 ± H E 3,2 D P T Note: Rest pads are for supporting machined and non- machined parts. They can also be used as stops and thrust pads in ﬁ xtures and toolmaking. Studs or grub screws can be screwed and glued into the tapped hole D to make a rest pad with external thread. Drawing reference: Form A: ﬂ at face Form B: ball end Form C: diamond grip KIPP Rest pads Order No. Form A Order No. Form B K0294.106012 K0294.206012 K0294.106025 K0294.206025 K0294.108015 K0294.208015 K0294.108030 K0294.208030 K0294.110020 K0294.210020 K0294.110040 K0294.210040 K0294.112025 K0294.212025 K0294.112050 K0294.212050 K0294.116030 K0294.216030 K0294.116060 K0294.216060 Order No. Form C K0294.306012 K0294.306025 K0294.308015 K0294.308030 K0294.310020 K0294.310040 K0294.312025 K0294.312050 K0294.316030 K0294.316060 D M6 M6 M8 M8 M10 M10 M12 M12 M16 M16 D1 6 6 8 8 10 10 12 12 16 16 D2 -/-/5 -/-/5 -/-/6 -/-/6 -/-/8 -/-/8 -/-/9,5 -/-/9,5 -/-/13 -/-/13 E 3 3 4 4 5 5 6 6 8 8 H 12,5 25 15 30 20 40 25 50 30 60 P 4 7 6 9 9 13 11 16 12 20 R -/5/- -/5/- -/8,5/- -/8,5/- -/9/- -/9/- -/12,75/- -/12,75/- -/17/- -/17/- T 11 11 13 13 17 17 19 19 24 24 187

188

K0380 Ball-end thrust screws with head A 2 D SW L4 B F BV FV SW Material: Screw carbon steel. Ball ball-bearing steel. Version: Screw, grade 10.9, black. Ball hardened, bright. 1 D 2 D 3 D 1 D Sample order: K0380.10820 L3 L1 L3 L2 L4 9° Note: Form A with full ball is used when a clean, polished contact surface is required. Surfaces which are not ﬂ at and parallel can be ﬁ rmly clamped or supported with Form B with ﬂ attened ball, the movable ball can adapt itself up to 9°. Drawing reference: Form A: full ball Form B: ﬂ attened ball Form BV: ﬂ attened ball non-rotating Form F: ﬂ attened ball diamond grip Form FV: ﬂ attened ball diamond grip non-rotating KIPP Ball-end thrust screws with head Order No. Form K0380.10620 K0380.10630 K0380.10640 K0380.10820 K0380.10835 K0380.10850 K0380.11025 K0380.11040 K0380.11060 K0380.11230 K0380.11250 K0380.11280 K0380.11640 K0380.11660 K0380.11680 K0380.12050 K0380.12080 K0380.120100 K0380.12460 K0380.12490 K0380.124120 A A A A A A A A A A A A A A A A A A A A A 188 D1 M6 M6 M6 M8 M8 M8 M10 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 M24 M24 M24 L1 20,8 30,8 40,8 21,2 36,2 51,2 26,7 41,7 61,7 32 52 82 43,3 63,3 83,3 54,2 84,2 104,2 64,7 94,7 124,7 D2 10 10 10 13 13 13 16 16 16 18 18 18 24 24 24 30 30 30 36 36 36 L3 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16 20 20 20 24 24 24 L4 3 3 16 3,5 3,5 22 4,5 4,5 28 5 5 44 6 6 36 7,5 28 48 9 30 60 Ball-Ø SW 4 4 4 5,5 5,5 5,5 7 7 7 8,5 8,5 8,5 12 12 12 15 15 15 18 18 18 5 5 5 6 6 6 8 8 8 10 10 10 14 14 14 17 17 17 19 19 19 Load rating max. kN (static load only) 9 9 9 15 15 15 20 20 20 30 30 30 60 60 60 90 90 90 120 120 120

189

K0380 Ball-end thrust screws with head Order No. Form B K0380.20620 K0380.20630 K0380.20640 K0380.20820 K0380.20835 K0380.20850 K0380.21025 K0380.21040 K0380.21060 K0380.21230 K0380.21250 K0380.21280 K0380.21640 K0380.21660 K0380.21680 K0380.22050 K0380.22080 K0380.220100 K0380.22460 K0380.22490 K0380.224120 Order No. Form BV K0380.40820 K0380.40835 K0380.40850 K0380.41025 K0380.41040 K0380.41060 K0380.41230 K0380.41250 K0380.41280 K0380.41640 K0380.41660 K0380.41680 Order No. Form F - - - - - - K0380.31025 K0380.31040 K0380.31060 K0380.31230 K0380.31250 K0380.31280 K0380.31640 K0380.31660 K0380.31680 - - - - - - Order No. Form FV - - - K0380.51025 K0380.51040 K0380.51060 K0380.51230 K0380.51250 K0380.51280 K0380.51640 K0380.51660 K0380.51680 D1 M6 M6 M6 M8 M8 M8 M10 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 M24 M24 M24 D1 M8 M8 M8 M10 M10 M10 M12 M12 M12 M16 M16 M16 D2 10 10 10 13 13 13 16 16 16 18 18 18 24 24 24 30 30 30 36 36 36 D2 13 13 13 16 16 16 18 18 18 24 24 24 D3 3,2 3,2 3,2 4,5 4,5 4,5 6 6 6 7,2 7,2 7,2 10,7 10,7 10,7 13,5 13,5 13,5 15,8 15,8 15,8 D3 4,5 4,5 4,5 6 6 6 7,2 7,2 7,2 10,7 10,7 10,7 L2 20 30 40 20 35 50 25 40 60 30 50 80 40 60 80 50 80 100 60 90 120 L2 20 35 50 25 40 60 30 50 80 40 60 80 L3 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16 20 20 20 24 24 24 L3 8 8 8 10 10 10 12 12 12 16 16 16 L4 3 3 16 3,5 3,5 22 4,5 4,5 28 5 5 44 6 6 36 7,5 28 48 9 30 60 L4 3,5 3,5 22 4,5 4,5 28 5 5 44 6 6 36 Ball-Ø SW 4 4 4 5,5 5,5 5,5 7 7 7 8,5 8,5 8,5 12 12 12 15 15 15 18 18 18 5 5 5 6 6 6 8 8 8 10 10 10 14 14 14 17 17 17 19 19 19 Load rating max. kN (static load only) 9 9 9 15 15 15 20 20 20 30 30 30 60 60 60 90 90 90 120 120 120 Ball-Ø SW 5,5 5,5 5,5 7 7 7 8,5 8,5 8,5 12 12 12 6 6 6 8 8 8 10 10 10 14 14 14 Load rating max. kN (static load only) 9 9 9 12 12 12 18 18 18 36 36 36 189

190

K0383 Ball-end thrust screws without head with full ball A D 1 D L1 SW Material: Screw carbon steel, grade 10.9 Ball, ball-bearing steel or POM. Version: Screw black. Ball hardened bright or POM. Sample order: K0383.10810 Note: Ball-end thrust screws with full ball are used when a clean, polished contact surface is required. Longer versions have been specially designed to be glued in, allowing mechanical connecting elements with external thread to be made cost-eff ectively for small and medium-sized series. Drawing reference: Form A: steel ball Form D: POM ball KIPP Ball-end thrust screws without head with full ball Order No. Form A K0383.1046 K0383.1048 K0383.10410 K0383.10412 K0383.10416 K0383.1058 K0383.10510 K0383.10512 K0383.10516 K0383.10520 K0383.10525 K0383.10610 K0383.10612 K0383.10616 K0383.10620 K0383.10625 K0383.10650 K0383.10660 K0383.10680 190 Order No. Form D K0383.3046 K0383.3048 K0383.30410 K0383.30412 K0383.30416 K0383.3058 K0383.30510 K0383.30512 K0383.30516 K0383.30520 K0383.30525 K0383.30610 K0383.30612 K0383.30616 K0383.30620 K0383.30625 - - - D1 M4 M4 M4 M4 M4 M5 M5 M5 M5 M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 L1 6 8 10 12 16 8 10 12 16 20 25 10,8 12,8 16,8 20,8 25,8 50,8 60,8 80,8 Ball-Ø 2,5 2,5 2,5 2,5 2,5 3 3 3 3 3 3 4 4 4 4 4 4 4 4 SW 2 2 2 2 2 2,5 2,5 2,5 2,5 2,5 2,5 3 3 3 3 3 3 3 3 Load rating max. kN (static load only) 3,5/0,3 3,5/0,3 3,5/0,3 3,5/0,3 3,5/0,3 4,5/0,5 4,5/0,5 4,5/0,5 4,5/0,5 4,5/0,5 4,5/0,5 9/0,9 9/0,9 9/0,9 9/0,9 9/0,9 9 9 9

191

K0383 Ball-end thrust screws without head with full ball KIPP Ball-end thrust screws without head with full ball Order No. Form A K0383.10810 K0383.10812 K0383.10816 K0383.10820 K0383.10825 K0383.10830 K0383.10850 K0383.10860 K0383.10880 K0383.11012 K0383.11016 K0383.11020 K0383.11025 K0383.11035 K0383.11216 K0383.11220 K0383.11225 Order No. Form D K0383.30810 K0383.30812 K0383.30816 K0383.30820 K0383.30825 K0383.30830 - - - K0383.31012 K0383.31016 K0383.31020 K0383.31025 K0383.31035 K0383.31216 K0383.31220 - K0383.11230 K0383.31230 K0383.11232 - K0383.11240 K0383.31240 K0383.11620 K0383.11625 K0383.11635 K0383.11650 K0383.12030 K0383.12040 K0383.12060 K0383.12435 K0383.12450 K0383.12480 - - - - - - - - - - D1 M8 M8 M8 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M20 M20 M20 M24 M24 M24 L1 11,2 13,2 17,2 21,2 26,2 31,2 51,2 61,2 81,2 13,7 17,7 21,7 26,7 36,7 18 22 27 32 34 42 23,3 28,3 38,3 53,3 34,2 44,2 64,2 39,7 54,7 84,7 Ball-Ø SW 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 7 7 7 7 7 8,5 8,5 8,5 8,5 8,5 8,5 12 12 12 12 15 15 15 18 18 18 4 4 4 4 4 4 4 4 4 5 5 5 5 5 6 6 6 6 6 6 8 8 8 8 10 10 10 12 12 12 Load rating max. kN (static load only) 10/1,5 10/1,5 15/1,5 15/1,5 15/1,5 15/1,5 15 15 15 20/2 20/2 20/2 20/2 20/2 30/3 30/3 30 30/3 30 30/3 60 60 60 60 90 90 90 120 120 120 191

192

Material: Screw carbon steel, grade 10.9 Ball, ball-bearing steel or POM. Version: Screw black. Ball hardened bright or POM. Sample order: K0383.41012 Note: Surfaces which are not ﬂ at and parallel can be ﬁ rmly clamped or supported with Form B, C or F with ﬂ attened ball, the movable ball can adapt itself up to 9°. Longer versions have been specially designed to glue in, allowing mechanical connecting elements with external thread to be made cost-eff ectively for small and medium-sized series. Drawing reference: Form B: steel ball Form C: POM ball Form F: steel ball diamond grip K0383 Ball-end thrust screws without head with ﬂ attened ball B C F 1 D 3 D 9° SW L2 KIPP Ball-end thrust screws without head with ﬂ attened POM ball Order No. Form K0383.7046 K0383.7048 K0383.70410 K0383.70412 K0383.70416 K0383.7058 K0383.70510 K0383.70512 K0383.70516 K0383.70520 K0383.70525 K0383.70610 K0383.70612 K0383.70616 K0383.70620 K0383.70625 K0383.70810 K0383.70812 K0383.70816 K0383.70820 K0383.70825 K0383.70830 C C C C C C C C C C C C C C C C C C C C C C D1 M4 M4 M4 M4 M4 M5 M5 M5 M5 M5 M5 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 D3 1,8 1,8 1,8 1,8 1,8 2,1 2,1 2,1 2,1 2,1 2,1 3 3 3 3 3 4,2 4,2 4,2 4,2 4,2 4,2 L2 5,9 7,9 9,9 11,9 15,9 7,8 9,8 11,8 15,8 19,8 24,8 10,3 12,3 16,3 20,3 25,3 10,4 12,4 16,4 20,4 25,4 30,4 Ball-Ø SW 2,5 2,5 2,5 2,5 2,5 3 3 3 3 3 3 4 4 4 4 4 5,5 5,5 5,5 5,5 5,5 5,5 2 2 2 2 2 2,5 2,5 2,5 2,5 2,5 2,5 3 3 3 3 3 4 4 4 4 4 4 Load rating max. kN (static load only) 0,3 0,3 0,3 0,3 0,3 0,5 0,5 0,5 0,5 0,5 0,5 0,9 0,9 0,9 0,9 0,9 1,5 1,5 1,5 1,5 1,5 1,5 KIPP Ball-end thrust screws without head with ﬂ attened serrated steel ball Order No. Form K0383.41012 K0383.41016 K0383.41025 K0383.41035 K0383.41216 K0383.41220 K0383.41230 K0383.41240 K0383.41620 K0383.41625 K0383.41635 K0383.41650 F F F F F F F F F F F F 192 D1 M10 M10 M10 M10 M12 M12 M12 M12 M16 M16 M16 M16 D3 6 6 6 6 7,2 7,2 7,2 7,2 10,7 10,7 10,7 10,7 L2 12 16 25 35 16 20 30 40 20 25 35 50 Ball-Ø SW 7 7 7 7 8,5 8,5 8,5 8,5 12 12 12 12 5 5 5 5 6 6 6 6 8 8 8 8 Load rating max. kN (static load only) 20 20 20 20 30 30 30 30 60 60 60 60

193

K0383 KIPP Ball-end thrust screws without head with ﬂ attened steel ball Order No. Form K0383.2046 K0383.2048 K0383.20410 K0383.20412 K0383.20416 K0383.2058 K0383.20510 K0383.20512 K0383.20516 K0383.20520 K0383.20525 K0383.20610 K0383.20612 K0383.20616 K0383.20620 K0383.20625 K0383.20650 K0383.20660 K0383.20680 K0383.20810 K0383.20812 K0383.20816 K0383.20820 K0383.20825 K0383.20830 K0383.20850 K0383.20860 K0383.20880 K0383.21012 K0383.21016 K0383.21020 K0383.21025 K0383.21035 K0383.21216 K0383.21220 K0383.21230 K0383.21240 K0383.21620 K0383.21625 K0383.21635 K0383.21650 K0383.22030 K0383.22040 K0383.22060 K0383.22435 K0383.22450 K0383.22480 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B D1 M4 M4 M4 M4 M4 M5 M5 M5 M5 M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M12 M16 M16 M16 M16 M20 M20 M20 M24 M24 M24 D3 1,4 1,4 1,4 1,4 1,4 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4,1 4,1 4,1 4,1 4,1 4,1 4,1 4,1 4,1 5,6 5,6 5,6 5,6 5,6 7 7 7 7 10,7 10,7 10,7 10,7 13,5 13,5 13,5 15,8 15,8 15,8 L2 5,8 7,8 9,8 11,8 15,8 7,6 9,6 11,6 15,6 19,6 24,6 10,1 12,1 16,1 20,1 25,1 50,1 60,1 80,1 10,3 12,3 16,3 20,3 25,3 30,3 50,3 60,3 80,3 12,3 16,3 20,3 25,3 35,3 16,2 20,2 30,2 40,2 20 25 35 50 30 40 60 35 50 80 Ball-Ø SW 2,5 2,5 2,5 2,5 2,5 3 3 3 3 3 3 4 4 4 4 4 4 4 4 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 7 7 7 7 7 8,5 8,5 8,5 8,5 12 12 12 12 15 15 15 18 18 18 2 2 2 2 2 2,5 2,5 2,5 2,5 2,5 2,5 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 5 5 5 5 5 6 6 6 6 8 8 8 8 10 10 10 12 12 12 Load rating max. kN (static load only) 3,5 3,5 3,5 3,5 3,5 4,5 4,5 4,5 4,5 4,5 4,5 9 9 9 9 9 9 9 9 10 10 15 15 15 15 15 15 15 20 20 20 20 20 30 30 30 30 60 60 60 60 90 90 90 120 120 120 193

194

K0383 Ball-end thrust screws without head with ﬂ attened ball and rotation lock BV FV 1 D 3 D 9° SW L2 Material: Screw carbon steel, grade 10.9 Ball, ball-bearing steel. Version: Screw black. Ball hardened, bright. Sample order: K0383.50820 Note: Surfaces which are not ﬂ at and parallel can be ﬁ rmly clamped or supported with with a ﬂ attened ball, the movable ball can adapt itself up to 9°. Longer versions have been designed especially to be glued in. This allows mechanical connecting elements with external thread to be made cost-eff ectively for small and medium-sized series. Drawing reference: Form BV: ﬂ attened ball non-rotating Form FV: ﬂ attened ball diamond grip non-rotating KIPP Ball-end thrust screws without head, with ﬂ attened ball and rotation lock Order No. Form BV K0383.50612 K0383.50616 K0383.50620 K0383.50625 K0383.50816 K0383.50820 K0383.50825 K0383.50830 K0383.51020 K0383.51025 K0383.51035 K0383.51040 K0383.51220 K0383.51230 K0383.51240 K0383.51250 K0383.51635 K0383.51650 K0383.52030 K0383.52040 K0383.52050 K0383.52060 K0383.52435 K0383.52450 K0383.52480 194 Order No. Form FV - - - - K0383.60816 K0383.60820 K0383.60825 K0383.60830 K0383.61020 K0383.61025 K0383.61035 K0383.61040 K0383.61220 K0383.61230 K0383.61240 K0383.61250 K0383.61635 K0383.61650 K0383.62030 K0383.62040 K0383.62050 K0383.62060 K0383.62435 K0383.62450 K0383.62480 D1 M6 M6 M6 M6 M8 M8 M8 M8 M10 M10 M10 M10 M12 M12 M12 M12 M16 M16 M20 M20 M20 M20 M24 M24 M24 D3 3 3 3 3 4,1 4,1 4,1 4,1 5,6 5,6 5,6 5,6 7 7 7 7 10,7 10,7 13,5 13,5 13,5 13,5 15,8 15,8 15,8 L2 12,1 16,1 20,1 25,1 16,3 20,3 25,3 30,3 20,3 25,3 35,3 40,2 20,2 30,2 40,2 50 35 50 30 40 50 60 35 50 80 Ball-Ø SW 4 4 4 4 5,5 5,5 5,5 5,5 7 7 7 7 8,5 8,5 8,5 8,5 12 12 15 15 15 15 18 18 18 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6 8 8 10 10 10 10 12 12 12 Load rating max. kN (static load only) 6 6 6 6 9 9 9 9 12 12 12 12 18 18 18 18 36 36 60 60 60 60 80 80 80

196

K0282 Self-aligning pads D3 9° D3 9° F 1 , 0 ± 1 L D4 9° M 2 , 0 ± 1 L Material: Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Sample order: K0282.120 Note: Self-aligning pads serve as stops, supports and thrust pads in ﬁ xture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with external thread, ﬂ attened ball, smooth. Form D: with external thread, ﬂ attened ball, with POM insert. Form F: with external thread, ﬂ attened ball, diamond grip. Form M: with external thread, ﬂ attened ball, diamond grip. Form G: press ﬁ t, ﬂ attened ball, smooth. Form H: press ﬁ t, ﬂ attened ball, with POM insert. Form J: press ﬁ t, ﬂ attened ball, diamond grip. Form K: press ﬁ t, ﬂ attened ball, with carbide insert. D2 SW D1 D3 D2 SW D1 D3 2 L 2 L 2 L D2 SW D1 D2 SW D1 2 L J 9° D3 K 9° D3 1 L , 1 0 ± L 1 L , 2 0 ± L 1 L D2 D1 n6 D2 D1 n6 D2 D1 n6 D3 1 L D2 D1 n6 C 2 0 , 0 ± 1 L D , 1 0 ± 1 L 9° G 9° , 2 0 0 ± L H 9° 1 , 0 ± L 196

197

K0282 Self-aligning pads KIPP Self-aligning pads Order No. Form K0282.108 K0282.110 K0282.112 K0282.116 K0282.120 C C C C C Order No. Form K0282.208 K0282.210 K0282.212 D D D Order No. Form K0282.308 K0282.310 K0282.312 K0282.316 K0282.320 F F F F F Order No. Form K0282.908 K0282.910 K0282.912 M M M Order No. Form K0282.403 K0282.404 K0282.405 G G G Order No. Form K0282.503 K0282.504 K0282.505 H H H Order No. Form K0282.603 K0282.604 K0282.605 J J J Order No. Form K0282.803 K0282.804 K0282.805 K K K D1 13 20 20 30 50 D1 13 20 20 D1 13 20 20 30 50 D1 13 20 20 D1 12 18 28 D1 12 18 28 D1 12 18 28 D1 12 18 28 D2 M8 M10 M12 M16 M20 D2 M8 M10 M12 D2 M8 M10 M12 M16 M20 D2 M8 M10 M12 D3 7,2 10,5 10,5 20 34,5 D3 7,9 12,7 12,7 D3 7,2 10,5 10,5 20 34,5 D4 7,7 12 12 D2 M3 M4 M5 D2 M3 M4 M5 D2 M3 M4 M5 D2 M3 M4 M5 D3 7,2 10,5 20 D3 7,9 12,7 19,05 D3 7,2 10,5 20 D3 7,9 12,7 19,05 L 11 17 25 L 11 17 25 L 11 17 25 L 11 17 25 L1 13 18 18 27 35 L1 13 18 18 L1 13 18 18 27 35 L1 13,3 18 18 L1 3,5 4,4 6,3 L1 3 4 6 L1 3,5 4,4 6,3 L1 3 4 6 L2 8 10 12 16 20 L2 8 10 12 L2 8 10 12 16 20 L2 8 10 12 Ball-Ø 10 16 16 25 40 Ball-Ø 10 16 16 Ball-Ø 10 16 16 25 40 SW 11 17 17 SW 11 17 17 27 41 SW 11 17 17 SW 11 17 17 27 41 Ball-Ø 10 16 16 Ball-Ø Receiving 10 16 25 hole ø 12 H7 x 6 min. ø 18 H7 x 8 min. ø 28 H7 x 13 min. Ball-Ø Receiving 10 16 25 hole ø 12 H7 x 6 min. ø 18 H7 x 8 min. ø 28 H7X13 min. Ball-Ø Receiving 10 16 25 hole ø 12 H7 x 6 min. ø 18 H7 x 8 min. ø 28 H7 x 13 min. Ball-Ø Receiving 10 16 25 hole ø 12 H7 x 6 min. ø 18 H7 x 8 min. ø 28 H7X13 min. Load rating max. kN (static load only) 10 25 25 90 165 Load rating max. kN (static load only) 10 25 25 Load rating max. kN (static load only) 10 25 25 90 165 Load rating max. kN (static load only) 10 25 25 Load rating max. kN (static load only) 10* 25* 90* Load rating max. kN (static load only) 10* 25* 90* Load rating max. kN (static load only) 10* 25* 90* Load rating max. kN (static load only) 10* 25* 90* 197

198

K0302 Self-aligning pads swivel angle 12° C F D1 1 2 ° D1 1 2 ° 2 0 , 0 ± H 5 2 , 0 ± H 1 H 1 H D T D T Material: Body carbon steel. Ball, ball-bearing steel 1.3505. Version: Body tempered. Ball hardened (50 - 55 HRC). Sample order: K0302.106 Note: Self-aligning pads serve as stops, supports and thrust pads in ﬁ xture construction. Ball secured against rotation. Drawing reference: Form C: male thread, smooth ﬂ attened ball Form F: male thread, serrated ﬂ attened ball KIPP Self-aligning pads swivel angle 12° Order No. Form C K0302.106 K0302.108 K0302.110 K0302.112 K0302.116 K0302.120 198 Order No. Form F K0302.306 K0302.308 K0302.310 K0302.312 K0302.316 K0302.320 D M6 M8 M10 M12 M16 M20 D1 6,7 6,7 10 10 20 20 H 13 13 18 18 27 27 H1 7 8 10 12 16 20 Ball-Ø 10 10 16 16 24 24 T 13 13 19 19 30 30 Load rating max. kN (static load only) 10 10 25 25 90 90

200

K0283 Self-aligning pads swivel angle 14° and 20° Material: Body steel. Ball rust and acid resistant steel. Form M with carbide insert. Version: Body black oxidised. Ball bright. Sample order: K0283.108 Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. They also serve as stops, supports and thrust pads in ﬁ xture and toolmaking. Grub screws or threaded studs can be screwed and glued into thread D3 making a self-aligning pad with external thread. Ball secured against rotation. Advantages: - Self-aligning pads can be swiveled. - High load forces can be absorbed. - The built-in o-ring keeps dirt and foreign particles out, which in turn guarantees reliable operation. C M D2 α D2 D4 α D3 D1 2 L L 1 L W S D3 D1 E K0283.1061 K0283.1101 K0283.1161 K0283.9061 K0283.9101 K0283.9161 L 5 2 , 0 ± 3 L D1 2 L L , 2 0 0 ± L 1 L 2 0 , 0 ± 3 L 200

201

K0283 Self-aligning pads swivel angle 14° and 20° KIPP Form C, ﬂ attened ball, ﬂ at face Order No. Form K0283.1061 K0283.106 K0283.108 K0283.1101 K0283.110 K0283.112 K0283.1161 K0283.116 K0283.120 C C C C C C C C C α 14° 14° 20° 20° 20° 20° 20° 20° 20° D1 12 16 22 18 22 22 26 34 34 D2 7 7 11 11 11 11 18 18 18 D3 M6 M6 M8 M10 M10 M12 M16 M16 M20 L 17,5 17,5 26 26 26 26 40 40 40 L1 6 6 9 9 9 9 15 15 15 L3 12,5 - - 20 - - 30 - - E 19,6 19,6 27,7 27,7 27,7 27,7 41,6 41,6 41,6 SW Ball-Ø 17 17 24 24 24 24 36 36 36 10 10 16 16 16 16 25 25 25 KIPP Form M, ﬂ attened ball, carbide steel diamond grip Order No. Form K0283.9061 K0283.906 K0283.908 K0283.9101 K0283.910 K0283.912 K0283.9161 K0283.916 K0283.920 M M M M M M M M M α 14° 14° 20° 20° 20° 20° 20° 20° 20° D1 12 16 22 18 22 22 26 34 34 D2 7 7 11 11 11 11 18 18 18 D3 M6 M6 M8 M10 M10 M12 M16 M16 M20 D4 5 5 7,5 7,5 7,5 7,5 13 13 13 L 17,5 17,5 26 26 26 26 40 40 40 L1 6 6 9 9 9 9 15 15 15 L2 0,6 0,6 0,8 0,8 0,8 0,8 0,9 0,9 0,9 L3 E 12,5 19,6 - - 20 - - 30 - - 19,6 27,7 27,7 27,7 27,7 41,6 41,6 41,6 SW Ball-Ø 17 17 24 24 24 24 36 36 36 10 10 16 16 16 16 25 25 25 Load rating max. kN (static load only) 14 14 34 34 34 34 90 90 90 Load rating max. kN (static load only) 14 14 34 34 34 34 90 90 90 201

202

K0284 Self-aligning pads with o-ring C K D2 1 0 ° F D2 1 0 ° 5 , 1 3 1 , 0 ± L 1 L 1 L 5 , 1 3 1 , 0 ± L D3 D1 D2 W D3 D1 3 L , 3 1 0 ± L 3 L , 3 1 0 ± L P 1 L D3 D1 D2 W D3 D1 O 1 L 202 Material: Body carbon steel. Ball: Form C, F tool steel. Form K POM. Form O stainless steel diamond impregnated. Form P stainless steel with polyurethane face. Version: Body tempered, black oxidised. Ball: Form C, F hardened, black oxidised. Form K POM ball, white. Form O surface comparable to 100 grade abrasive grit. Form P polyurethane, hardness 60 Shore. Sample order: K0284.704X012 Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. They also serve as stops, supports and thrust pads in ﬁ xtures and toolmaking. Ball secured against rotation. Form O: The abrasive diamond surface is fused ﬁ rmly to the ball. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a ﬁ rm grip on a very small area with minimum damage to the surface. The diamond surface off ers excellent wear resistance. Form P: The polyurethane surface is permanently vulcanised on the ball. It is abrasion-resistant and does not discolour. Off ers optimum protection against damage to delicate surfaces. The pearl-like surface gives a ﬁ rm grip and allows air to escape so as to prevent any suction eff ect between the contact surface and the self-aligning pads. Advantages: The built-in O-ring holds the ball in place and keeps dirt and foreign particles out ensuring smooth and even movement.

203

K0284 Self-aligning pads with o-ring KIPP Form C, ﬂ attened steel ball, smooth Order No. Form K0284.104X012 K0284.104X025 K0284.105X016 K0284.105X025 C C C C D1 10 10 13 13 D2 6 6 8,5 8,5 KIPP Form F, ﬂ attened steel ball, diamond grip Order No. Form K0284.304X012 K0284.304X025 K0284.305X016 K0284.305X025 F F F F D1 10 10 13 13 KIPP Form K, ﬂ attened POM ball, smooth Order No. Form K0284.704X012 K0284.704X025 K0284.705X016 K0284.705X025 K K K K D1 10 10 13 13 D2 6 6 8,5 8,5 D2 6 6 8,5 8,5 KIPP Form O, stainless-steel ball, diamond impregnated Order No. Form K0284.504X012 K0284.504X025 K0284.505X017 K0284.505X026 K0284.506X021 K0284.508X024 K0284.510X028 O O O O O O O D1 10 10 13 13 17 19 24 D2 8 8 11 11 14 19 21 D3 M4 M4 M5 M5 M6 M8 M10 KIPP Form P, stainless-steel ball with polyurethane face Order No. Form K0284.604X014 K0284.604X027 K0284.605X019 K0284.605X028 K0284.606X023 K0284.608X026 K0284.610X030 P P P P P P P D1 10 10 13 13 17 19 24 D2 10 10 13 13 16 21 23 D3 M4 M4 M5 M5 D3 M4 M4 M5 M5 D3 M4 M4 M5 M5 L 12,5 25,5 17,5 26,5 21 24 28 D3 M4 M4 M5 M5 M6 M8 M10 L 12 25 16 25 L 12 25 16 25 L 12 25 16 25 L1 3,5 9 6,5 9 7,5 8,5 9 L 14,5 27,5 19,5 28,5 23 26 30 L1 4,5 12 5 12 L1 4,5 12 5 12 L1 4,5 12 5 12 L3 2 2 3 3 3 4 4 L1 3,5 9 6,5 9 7,5 8,5 9 Ball-Ø 7 7 10 10 Ball-Ø 7 7 10 10 Ball-Ø 7 7 10 10 Load rating max. kN (static load only) 12 12 20 20 Load rating max. kN (static load only) 12 12 20 20 Load rating max. kN (static load only) 2 2 4 4 W 28 28 28 28 28 24 24 Ball-Ø 7 7 10 10 13 15 20 Load rating max. kN (static load only) 11,5 11,5 19,8 19,8 27,4 38,6 58,3 L3 4 4 5 5 5 6 6 W 28 28 28 28 28 24 24 Ball-Ø 7 7 10 10 13 15 20 203

204

K0285 Self-aligning pads with O-ring and exchangeable inserts M D2 D3 D4 D1 1 0 ° 4 3 L 2 L 3 1 , 0 ± 1 L C E K F D2 1 0 ° D2 1 0 ° 4 3 L 2 L 3 1 , 0 ± 1 L 4 3 L 2 L 3 1 , 0 ± 1 L D4 D1 D2 D4 D1 O D2 1 0 ° D4 D1 4 3 L 2 L 3 1 , 0 ± 1 L 1 0 ° 6 3 L 2 L 3 1 , 0 ± 1 L P D3 D4 D1 Material: Body carbon steel. Ball rust and acid resistant steel. Inserts: Form C, F, M tool steel Form K POM Form E stainless steel. Form O stainless steel diamond impregnated. Form P stainless steel with polyurethane surface. Version: Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. Form K white. Form E hardened, bright. Form O diamond impregnated surface comparable to 100 grade abrasive grit. Form P polyurethane surface, hardness 60 Shore. Sample order: K0285.736X036 Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. They can also be used as stops, supports and thrust pads in ﬁ xtures and toolmaking. The ball can be removed from the housing by applying light pressure to the socket head screw. Ball secured against rotation. Advantages: Highly cost-eff ective as inserts can be exchanged. The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement. KIPP Form C, ﬂ attened steel insert, smooth Order No. Form K0285.117X022 K0285.119X024 K0285.124X028 K0285.130X030 K0285.136X036 204 C C C C C D1 17 19 24 30 36 D2 10 12 16 20 25 D4 M6 M8 M10 M12 M12 L1 22 24 28 30 36 L2 7 8 8 9 11 L3 10 10 10 10 10 Ball-Ø 13 15 20 23 28 Load rating max. kN (static load only) 28 39 58 95 136 Order No. steel insert K0385.10108 K0385.12108 K0385.16108 K0385.20108 K0385.25108

205

K0285 K0285 KIPP Form E, ﬂ attened stainless steel insert, smooth Order No. Form K0285.236X036 K0285.219X024 K0285.217X022 K0285.224X028 K0285.230X030 E E E E E D1 36 19 17 24 30 KIPP Form F, ﬂ attened, diamond grip Order No. Form K0285.317X022 K0285.319X024 K0285.324X028 K0285.330X030 K0285.336X036 F F F F F D1 17 19 24 30 36 D2 25 12 10 16 20 D2 10 12 16 20 25 KIPP Form K, ﬂ attened POM insert, smooth Order No. Form K0285.717X022 K0285.719X024 K0285.724X028 K0285.730X030 K0285.736X036 K K K K K D1 17 19 24 30 36 D2 10 12 16 20 25 D4 M12 M8 M6 M10 M12 D4 M6 M8 M10 M12 M12 D4 M6 M8 M10 M12 M12 L1 36 24 22 28 30 L1 22 24 28 30 36 L2 11 8 7 8 9 L2 7 8 8 9 11 L3 10 10 10 10 10 L3 10 10 10 10 10 L1 22 24 28 30 36 L2 7 8 8 9 11 L3 10 10 10 10 10 KIPP Form M, ﬂ attened, with carbide serrations Order No. Form K0285.930X030 K0285.917X022 K0285.924X028 K0285.919X024 K0285.936X036 M M M M M D1 30 17 24 19 36 D2 20 10 16 12 25 D3 15,9 7,9 12,7 9,5 19 D4 M12 M6 M10 M8 M12 L1 30 22 28 24 36 KIPP Form O, stainless-steel insert, diamond impregnated Order No. Form K0285.517X022 K0285.519X024 K0285.524X028 K0285.530X030 K0285.536X036 O O O O O D1 17 19 24 30 36 D2 10 12 16 20 25 D4 M6 M8 M10 M12 M12 L1 22 24 28 30 36 KIPP Form P, stainless-steel insert with polyurethane face Order No. Form K0285.617X024 K0285.619X026 K0285.624X030 K0285.630X032 K0285.636X038 P P P P P D1 17 19 24 30 36 D2 10 12 16 20 25 D3 10 13 16 21 27 D4 M6 M8 M10 M12 M12 L2 9 7 8 8 11 L2 7 8 8 9 11 L1 24 26 30 32 38 L3 10 10 10 10 10 L3 10 10 10 10 10 L2 7 8 8 9 11 Ball-Ø 28 15 13 20 23 Ball-Ø 13 15 20 23 28 Ball-Ø 13 15 20 23 28 Ball-Ø 23 13 20 15 28 Ball-Ø 13 15 20 23 28 L3 12 12 12 12 12 Load rating max. kN (static load only) 136 39 28 58 95 Load rating max. kN (static load only) 28 39 58 95 136 Load rating max. kN (static load only) 4 7 14 27 47 Load rating max. kN (static load only) 95 28 58 39 136 Order No. stainless steel insert K0385.25102 K0385.12102 K0385.10102 K0385.16102 K0385.20102 Order No. gripper K0385.1010 K0385.1210 K0385.1610 K0385.2010 K0385.2510 Order No. POM insert K0385.10109 K0385.12109 K0385.16109 K0385.20109 K0385.25109 Order No. gripper K0385.20107 K0385.10107 K0385.16107 K0385.12107 K0385.25107 Load rating max. kN (static load only) Order No. stainless steel insert, diamond surface 28 39 58 95 136 Ball-Ø 13 15 20 23 28 K0385.10105 K0385.12105 K0385.16105 K0385.20105 K0385.25105 Order No. stainless steel insert, polyurethane surface K0385.10126 K0385.12126 K0385.16126 K0385.20126 K0385.25126 205

206

K0287 Self-aligning pads adjustable C 2 D F 2 D 9° SW 1 D E L1 L 9° 1 D L1 L Material: Steel. Version: Housing tempered and manganese phosphated. Ball hardened, bright. Nut black oxidised. Sample order: K0287.316 Note: Ball secured against rotation. KIPP Form C, ﬂ attened ball, ﬂ at face Order No. Form K0287.108 K0287.110 K0287.112 K0287.116 K0287.120 C C C C C D1 M8 M10 M12 M16 M20 KIPP Form F, ﬂ attened ball, diamond grip Order No. Form K0287.308 K0287.310 K0287.312 K0287.316 K0287.320 F F F F F 206 D1 M8 M10 M12 M16 M20 D2 5,8 8,6 8,6 10,5 20 D2 5,8 8,6 8,6 10,5 20 L 36,6 45,7 50,7 60,7 77,3 L 36,6 45,7 50,7 60,7 77,3 L1 25 30 35 40 50 L1 25 30 35 40 50 E 14,5 19 19 27 33 E 14,5 19 19 27 33 SW 13 17 17 24 30 SW 13 17 17 24 30 Ball-Ø 8,5 12 12 16 25 Ball-Ø 8,5 12 12 16 25 Load rating max. kN (static load only) 8 8 15 25 90 Load rating max. kN (static load only) 8 8 15 25 90

208

K0288 Self-aligning pads adjustable with o-ring C K D2 1 0 ° F D2 1 0 ° 5 , 1 3 1 , 0 ± 2 L 5 , 1 3 1 , 0 ± 2 L D1 E D2 W 1 L W S , 3 1 0 ± 2 L 1 L D1 E D2 W P 3 L 1 L W S , 3 1 0 ± 2 L 1 L D1 SW1 D1 SW1 W S W S E E O 3 L 208 Material: Body carbon steel. Ball: Form C, F, tool steel. Form K POM. Form O stainless steel diamond impregnated. Form P stainless steel with polyurethane surface. Version: Body tempered, black oxidised. Ball: Form C, F hardened, black oxidised. Form K POM ball white. Form O surface comparable to 100 grade abrasive grit. Form P polyurethane hardness 60 Shore. Sample order: K0288.506X012 (include length L1) Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. They also serve as stops, supports and thrust pads in ﬁ xtures and toolmaking. Ball secured against rotation. Form O: The abrasive diamond surface is bonded ﬁ rmly to the ball. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a ﬁ rm grip on a very small area with minimum damage to the surface. The diamond surface off ers excellent wear resistance. Form P: The polyurethane surface is vulcanised ﬁ rmly to the ball. It is abrasion-resistant and does not discolour. It off ers optimum protection against damage to delicate surfaces. The pearl-like surface gives a ﬁ rm grip and allows air to escape so as to prevent any suction eff ect between the contact surface and the self-aligning pads. Advantages: The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement.

209

K0288 Self-aligning pads adjustable with o-ring KIPP Form C, ﬂ attened steel ball, smooth Order No. Form K0288.106X012 K0288.106X025 K0288.106X040 K0288.108X012 K0288.108X025 K0288.108X040 C C C C C C D1 M6 M6 M6 M8 M8 M8 D2 6 6 6 8,5 8,5 8,5 KIPP Form F, ﬂ attened steel ball, diamond grip Order No. Form K0288.306X012 K0288.306X025 K0288.306X040 K0288.308X012 K0288.308X025 K0288.308X040 F F F F F F D1 M6 M6 M6 M8 M8 M8 KIPP Form K, ﬂ attened POM ball, smooth Order No. Form K0288.706X012 K0288.706X025 K0288.706X040 K0288.708X012 K0288.708X025 K0288.708X040 K K K K K K D1 M6 M6 M6 M8 M8 M8 D2 6 6 6 8,5 8,5 8,5 D2 6 6 6 8,5 8,5 8,5 L1 12 25 40 12 25 40 L1 12 25 40 12 25 40 L1 12 25 40 12 25 40 KIPP Form O, stainless-steel ball, diamond impregnated Order No. Form K0288.506X K0288.508X K0288.512X K0288.510X K0288.516X O O O O O D1 M6 M8 M12 M10 M16 D2 8 11 19 14 21 L1 12/25/40 L2 10 12/25/40 14,5 20/40/60 15/30/50 25/50/80 19 16 23 L3 2 3 4 3 4 KIPP Form P, stainless-steel ball with polyurethane face L2 9,5 9,5 9,5 13 13 13 L2 9,5 9,5 9,5 13 13 13 L2 9,5 9,5 9,5 13 13 13 E 11,5 15 21,9 19,6 27,7 E 11,5 11,5 11,5 15 15 15 E 11,5 11,5 11,5 15 15 15 E 11,5 11,5 11,5 15 15 15 SW SW1 10 13 19 17 24 - - 5 3 6 Order No. Form K0288.612X K0288.610X K0288.608X K0288.606X K0288.616X P P P P P D1 M12 M10 M8 M6 M16 D2 21 16 13 10 23 L1 20/40/60 15/30/50 L2 21 18 12/25/40 16,5 12/25/40 25/50/80 12 25 L3 6 5 5 4 6 E 21,9 19,6 15 11,5 27,7 SW 10 10 10 13 13 13 SW 10 10 10 13 13 13 SW 10 10 10 13 13 13 W 28 28 24 28 24 SW 19 17 13 10 24 Ball-Ø 7 7 7 10 10 10 Ball-Ø 7 7 7 10 10 10 Ball-Ø 7 7 7 10 10 10 Load rating max. kN (static load only) 9 9 9 15 15 15 Load rating max. kN (static load only) 9 9 9 15 15 15 Load rating max. kN (static load only) 2 2 2 4 4 4 Ball-Ø 7 10 15 13 20 SW1 5 3 - - 6 Load rating max. kN (static load only) 9,2 15,5 29,8 18,8 50,3 W 24 28 28 28 24 Ball-Ø 15 13 10 7 20 209

210

K0289 Self-aligning pads adjustable with O-ring and exchangeable inserts Material: Body carbon steel. Ball rust and acid resistant steel. Inserts: Form C, F, M tool steel Form K POM Form E stainless steel. Form O stainless steel diamond impregnated. Form P stainless steel with polyurethane surface. Version: Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. Form K white. Form E hardened, bright. Form O diamond impregnated surface comparable to 100 grade abrasive grit. Form P polyurethane surface, hardness 60 Shore. Sample order: K0289.124X100 Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. They also serve as stops, supports and thrust pads in ﬁ xtures and toolmaking. The ball can be removed from the housing by applying light pressure to the socket head screw. Ball secured against rotation. Advantages: Highly cost-eff ective as inserts can be exchanged. The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement. C E K F D2 1 0 ° D2 1 0 ° M D2 D3 1 0 ° 4 3 L 2 L 4 3 L 2 L 4 3 L 2 L 1 L 1 L 1 L SW1 D1 W S E SW1 D1 W S E O D2 1 0 ° 4 3 L 2 L SW1 D1 E D3 P D2 W S 1 0 ° 6 3 L 2 L 1 L 1 L SW1 D1 SW1 D1 W S W S E E 210

211

KIPP Form C, ﬂ attened steel insert, smooth Order No. Form K0289.110X015 K0289.110X030 K0289.110X050 K0289.112X020 K0289.112X040 K0289.112X060 K0289.116X025 K0289.116X050 K0289.116X080 K0289.120X030 K0289.120X060 K0289.120X100 K0289.124X040 K0289.124X100 C C C C C C C C C C C C C C D1 M10 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 M24 M24 D2 10 10 10 12 12 12 16 16 16 20 20 20 25 25 L1 15 30 50 20 40 60 25 50 80 30 60 100 40 100 L2 17 17 17 19 19 19 23 23 23 24 24 24 30 30 L3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 KIPP Form E, ﬂ attened stainless steel insert, smooth Order No. Form K0289.210X015 K0289.210X030 K0289.210X050 K0289.212X020 K0289.212X040 K0289.212X060 K0289.216X025 K0289.216X050 K0289.216X080 K0289.220X030 K0289.220X060 K0289.220X100 K0289.224X040 K0289.224X100 E E E E E E E E E E E E E E D1 M10 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 M24 M24 D2 10 10 10 12 12 12 16 16 16 20 20 20 25 25 KIPP Form F, ﬂ attened, diamond grip Order No. Form K0289.310X015 K0289.310X030 K0289.310X050 K0289.312X020 K0289.312X040 K0289.312X060 K0289.316X025 K0289.316X050 K0289.316X080 K0289.320X030 K0289.320X060 K0289.320X100 K0289.324X040 K0289.324X100 F F F F F F F F F F F F F F D1 M10 M10 M10 M12 M12 M12 M16 M16 M16 M20 M20 M20 M24 M24 D2 10 10 10 12 12 12 16 16 16 20 20 20 25 25 L1 15 30 50 20 40 60 25 50 80 30 60 100 40 100 L1 15 30 50 20 40 60 25 50 80 30 60 100 40 100 L2 17 17 17 19 19 19 23 23 23 24 24 24 30 30 L2 17 17 17 19 19 19 23 23 23 24 24 24 30 30 L3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 L3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 E 19,6 19,6 19,6 21,9 21,9 21,9 27,7 27,7 27,7 34,6 34,6 34,6 41,6 41,6 E 19,6 19,6 19,6 21,9 21,9 21,9 27,7 27,7 27,7 34,6 34,6 34,6 41,6 41,6 E 19,6 19,6 19,6 21,9 21,9 21,9 27,7 27,7 27,7 34,6 34,6 34,6 41,6 41,6 SW SW1 Ball-Ø 17 17 17 19 19 19 24 24 24 30 30 30 36 36 3 3 3 5 5 5 6 6 6 8 8 8 10 10 13 13 13 15 15 15 20 20 20 23 23 23 28 28 SW SW1 Ball-Ø 17 17 17 19 19 19 24 24 24 30 30 30 36 36 3 3 3 5 5 5 6 6 6 8 8 8 10 10 13 13 13 15 15 15 20 20 20 23 23 23 28 28 SW SW1 Ball-Ø 17 17 17 19 19 19 24 24 24 30 30 30 36 36 3 3 3 5 5 5 6 6 6 8 8 8 10 10 13 13 13 15 15 15 20 20 20 23 23 23 28 28 Load rating max. kN (static load only) 19 19 19 30 30 30 50 50 50 85 85 85 121 121 Load rating max. kN (static load only) 19 19 19 30 30 30 50 50 50 85 85 85 121 121 Load rating max. kN (static load only) 19 19 19 30 30 30 50 50 50 85 85 85 121 121 Order No. steel insert K0385.10108 K0385.10108 K0385.10108 K0385.12108 K0385.12108 K0385.12108 K0385.16108 K0385.16108 K0385.16108 K0385.20108 K0385.20108 K0385.20108 K0385.25108 K0385.25108 Order No. stainless steel insert K0385.10102 K0385.10102 K0385.10102 K0385.12102 K0385.12102 K0385.12102 K0385.16102 K0385.16102 K0385.16102 K0385.20102 K0385.20102 K0385.20102 K0385.25102 K0385.25102 Order No. gripper K0385.1010 K0385.1010 K0385.1010 K0385.1210 K0385.1210 K0385.1210 K0385.1610 K0385.1610 K0385.1610 K0385.2010 K0385.2010 K0385.2010 K0385.2510 K0385.2510 211

NEW PRODUCTS

Clamping elements

Positioning elements

Support and stop elements

Form holding systems

Workpiece stabiliser

Connecting elements

Basic elements

Mineral cast

Add-on elements

Accessories

Zero-point clamping system

5-axis module clamping system 80

5-axis module clamping system 50

Positioning and clamping systems

5-axis clamping system compact

3-axis and 5-axis vices

Centric vices

NC vices

Multi-clamping systems